Can’t wait to hear the engine at full noise!!! You, like me, have tasted how good PDM are and it’s going to be difficult to go back to fuses and relays!
Great stuff Matt ...that motor sounds so sweet can't wait to see it charging around some tracks!....good shout out for Millers oils they are local to me and I've used their stuff for years.
This Mini just keeps getting cooler and cooler, love ya work Matt, very nice clean build😊, watching from The Real Down Under Tasmania Australia🍺🍻🍺🍻 🇦🇺🤝🇬🇧😎👍✌
One thing to note with the green indicator lights, that indication is only valid while the PDM thinks the output is on, it doesn't account for physical issues for example a pump failure, you'll want to include some protection logic around engine temps or oil pressure, if engine temp is higher than your engine can withstand then limit max rpm to 700 etc, that sort of thing. Looking good though, it'll be a beast.
The engine does seem very responsive, your engine stabiliser must be good too, no pitching at all. The PDM looks very configurable, really looking good.
The build is coming together you should have some good fun in it, love the quality of your work not sure why you chose a Merc not a lot to weld to on them
running with no exhaust reminds me of the time i was moving an allegro on the starter, with no manifolds on. unfortunately the petrol pump [which is below the open head] supplied lots of petrol straight down it's neck, full throttle across the main dealer workshop, + luckily i missed everything... but run my ankle over...
I used a heavy duty hydraulic line for my engine once, pipe didn’t have enough flexibility, half way through a rally the fitting on oil cooler snapped off. End of rally ☹️
@@Urchfab Matt, I did that before and have had no problems till now. I am just hoping that its just me and no one else. TH-cam unsubbed me, dont know why. All hooked back in now. Thanks Matt....
The amount of adjustment and detail with this is insane, should be a huge asset moving forward 👍
And sideways.
Can’t wait to hear the engine at full noise!!! You, like me, have tasted how good PDM are and it’s going to be difficult to go back to fuses and relays!
Getting closer, well done Matt
I didn't realise quite how many different inputs you could include into a switch function that you can with a PDM and your intro is just spot on.
Great stuff Matt ...that motor sounds so sweet can't wait to see it charging around some tracks!....good shout out for Millers oils they are local to me and I've used their stuff for years.
This Mini just keeps getting cooler and cooler, love ya work Matt, very nice clean build😊, watching from The Real Down Under Tasmania Australia🍺🍻🍺🍻 🇦🇺🤝🇬🇧😎👍✌
Thanks mate
Weirdly, I'm just as excited to see this fire up as I am about the Volvoghini first start that showed up one video above in my subscription box.
Looking great, sounds great. Lots of good info about the PDM too, thanks
That throttle response was quick. Sounds good Matt.
I’ve just got into the aim stuff, thanks to videos like this I’ve made the right choice
It’s definitely quality kit 👌
One thing to note with the green indicator lights, that indication is only valid while the PDM thinks the output is on, it doesn't account for physical issues for example a pump failure, you'll want to include some protection logic around engine temps or oil pressure, if engine temp is higher than your engine can withstand then limit max rpm to 700 etc, that sort of thing. Looking good though, it'll be a beast.
The engine sound like bike!!
Super work
Hello from France 🇫🇷
Sounds sick dude! Nice one!
Cant eait to see this on the track, great stuff.
The engine does seem very responsive, your engine stabiliser must be good too, no pitching at all. The PDM looks very configurable, really looking good.
LOL I was waiting for the flames!
Awesome build
The engine sounded strong and quick to rev... Awesome. Going to be quick..LAG
Sounds great
Well done Mr 😎
Fantastic
Sounds a lot like my ZX-1400 Ninja with a Hindle full stainless header.
200+ HP at rear wheel. 🏍🏎🚗😃
Impressive 😎
Sounds like a Renault 10
Great video
Love to hear a mini tickover…unless it’s very cammy sounds saweet!!!
Always like you videos!
The build is coming together you should have some good fun in it, love the quality of your work not sure why you chose a Merc not a lot to weld to on them
It was a cheap late night impulse buy followed by immediate regret 😂
Atleast it started there's a good thing..
Great stuff
Awesome 😎
merci très intéressant....très beau projet
Wow!
these flames!
Um I came to see fire
I thought all my content was fire 🔥 Sorry
Золотые руки!
Good job on the tumbnail 😅😂👌👌
Kewl!
Wow 👍🏽👍🏽
running with no exhaust reminds me of the time i was moving an allegro on the starter, with no manifolds on. unfortunately the petrol pump [which is below the open head] supplied lots of petrol straight down it's neck, full throttle across the main dealer workshop, + luckily i missed everything... but run my ankle over...
Dang
Bravo!! 👏 🧙♂🧚🧚♂🧚♀🎶
😕 No Racing this year. Something look forward next year.
Lovely bit of kit, wish it was around years gone by farting around with old looms and ecu’s for days
If you need recommendations for a good exhaust guy in your area Matt, drop me a PM. 👍
sounds balsy! what's the redline on that wee tractor motor?
I’m not actually sure.
@@Urchfab lord hates a coward! 😁
Call it the petit pois
Any reason you picked millers over valvoline
It was recommended to me.
I used a heavy duty hydraulic line for my engine once, pipe didn’t have enough flexibility, half way through a rally the fitting on oil cooler snapped off. End of rally ☹️
I think I will get another one as I’m not happy with the routing. 👍
like number 420 W00T
matt, for some reason youtube has hidden my sub and notification?....you only appeared on YT recomendations....
Press the notification bell 👍
@@Urchfab Matt, I did that before and have had no problems till now. I am just hoping that its just me and no one else. TH-cam unsubbed me, dont know why. All hooked back in now. Thanks Matt....
What degree of timing you running
No idea
I hate living in NZ when it comes to car stuff, in our pesos that is over 4 grand landed here.
Jeez, do you earn 4 times as much over there?
@@Urchfab WE wish! most are on 20 ish bucks an hour, equivalent to 10 quid. So car guys here are pretty dedicated.
C&E Plant?
Yep
Nice photoshop... err, flames!
ahaha what a clickbait on preview like it :)
Sounds awesome but all that electronic stuff would fry my 68 year old brain.
*Promosm*
P