As you saw I debating changing the high beams. The low beam is so good I ordered the high beams. They work great. Better then HID. definitely get them if your thinking about it.
that little screw is an adjuster to aim the LED pattern, the field of light, so your housing has an adjuster and the LED has a fine tuner, learn how to adjust this so you are not blaring into eyeballs at night
also you should get the appropriate driver for your LEDs or you will have issue with the fans and light down the road, cyclopsadventure has the best kits for the hayabusa IMHO, you are missing a critical component in the driver.. do not use car LEDs ffs just cuz they're cheaper.. get the right set up so you don't have problems some place its pitch dark and you have to ride... if you do throw a few of those hardhat lights they have at autozone the heavy duty 3000 lumen ones, keep it int he trunk if your lights go out you can strap two to your helmet and get home
Is there a led bulb with the correct plug for the stock wiring connector the h7 bulb I have for the low beam the plug is also smaller than the stock connector.. where you able to get the metal clasp back onto the back of the bulb
itogandoify 1, sounds like the low beam isn’t stock or some how mismatched A: confirm what’s the wrong part. Light housing or bulb setup. After you do that. Get the correct part. You said the bulb isn’t fitting. So I have to wonder why. 2, if your asking is someone sells a fully plug and play setup. With all the wiring done. I don’t know. I would guess yes but it’s gonna cost way more then what I paid for these light bulbs and it wasn’t too much work
As you saw I debating changing the high beams. The low beam is so good I ordered the high beams. They work great. Better then HID. definitely get them if your thinking about it.
that little screw is an adjuster to aim the LED pattern, the field of light, so your housing has an adjuster and the LED has a fine tuner, learn how to adjust this so you are not blaring into eyeballs at night
also you should get the appropriate driver for your LEDs or you will have issue with the fans and light down the road, cyclopsadventure has the best kits for the hayabusa IMHO, you are missing a critical component in the driver.. do not use car LEDs ffs just cuz they're cheaper.. get the right set up so you don't have problems some place its pitch dark and you have to ride... if you do throw a few of those hardhat lights they have at autozone the heavy duty 3000 lumen ones, keep it int he trunk if your lights go out you can strap two to your helmet and get home
Great info. Thanks for sharing it.
How did this kit workout for you?
How was you able to secure the led headlight. The silver clip is entirely to small. How were u able to secure it in the hole.
Only the bulb goes inside the hole
Is there a led bulb with the correct plug for the stock wiring connector the h7 bulb I have for the low beam the plug is also smaller than the stock connector.. where you able to get the metal clasp back onto the back of the bulb
itogandoify
1, sounds like the low beam isn’t stock or some how mismatched
A: confirm what’s the wrong part. Light housing or bulb setup. After you do that. Get the correct part. You said the bulb isn’t fitting. So I have to wonder why.
2, if your asking is someone sells a fully plug and play setup. With all the wiring done. I don’t know. I would guess yes but it’s gonna cost way more then what I paid for these light bulbs and it wasn’t too much work
2004 busa with same problem you describe
I am from Puerto rico i have a hayabusa with problems in the led ligth where can i can contact you so you can help me and thanks
I don’t own or work for the company who makes the lights but what’s wrong ? How can I help ?