Hell yeah man! Just dropped my 02 red L off at a shop to get her running again been sitting in garage non running for 6 years lol since 2014 but this year I’m getting her going again
I recently got an L and it has a bunch of issues that I'm fixing, can't wait to do this mod, it's freaking sweet! I'm finding out a lot about these trucks then new stuff comes out.
Hi., I salute you. ✌from San Diego ., California...,yes I like the idea and I will make that mod.to mi truck.. thanks for your video and I think your "RED DEVIL" will look super slim👌 nice video and very precise. Again thanks for your experience. On modification off our toy's..keep it up ..😎👍✌
I got a question for you. I have a non-lightning truck and am fixing to switch over to a lightning bumper. Your video gave me a good visual on the brackets that i would need and where to place them, but I was wondering what the silver piece was that connected to both bumper mounts?
Thanks for the video, can't wait to see it done... but I still think the bolts will need to higher, the top one can hangover the top, and make a new hole for the bottom bolt... or get welding. I did the same thing, still was not enough, but you "CAN" lift the top part of the fiberglass bumper and attach it the grille shell. I used rivets. The fog lights are what stops it from going up, they hit the steel bumper. I thought to notch the steel bumper, but came to my senses and said no.
Thanks for Watching! Yeah I thought about going further, but with the amount I can move it up when I was testing it, I think ill be happy. Only one way to find out, can't wait to see it with it all together either, hopefully soon! Just waiting on these parts, might be a while with all this crap going on now and shut downs. Who knows 🤷♂️
What is the socket size of the 4 (2 in each side) nuts that are behind the bracket that grabs the bumper? Basically the ones that you cut the holes for, I have to run down to the store tomorrow because I only have up to 18mm lol
Hey i have a f150 and i really wanted to see how the bumper mounts up from the inside since theres literally no videos on how to install the bumper cover this is the closest ive seen of no bumper. Since the lighting bumper i bought its a little beat but can really see how its mounted
You you also slot the brackets themself. Im having a problem with the taiwan inner bumper to the oem cover i have a gap of like 5/8inch and if i try and put the clips in it sucks the cover down and you can clearly see from the front its warped looking.
@@LUKAMANIA Doubt it, I remember checking here and there and not finding a toutorial because I wanted to see how the clips and brackets worked on a lightning so I'd no what to buy.
Yo dude I have 2000 lightning I just took the bumper apart to take care of that gap the 2 studs on each side are already slotted from the factory alls I did was tap them down they give an inch up or down never cut nothing why you didn't see that ?
I did see that, this gives much more adjustment, for a much tighter gap. Plus, those studs that are slotted that you tapped on, tend to drop back down over time, going right back to where they were, giving you bumper gap again, this won't.
Yes will definitely give you more your truck looks great I'm friends with Johnny & Sue wiker (lightning) I'm not racing mine just for street I only did a 2.6 KB charger 497 RWH It's good enough i drive it every day. Like you videos have a great day Frank
There’s a newer video where I did, the bumper was in paint at the time. The video with the thumbnail that says “ready to rock” titled “first cold start, tuning, and front end results” has the bumper on with the before/after results...and That was said in this video, guess you skipped over it 🤷♂️
![ตีสิบเดย์ [FULL] | อาจารย์โอเล่ ญาณสัมผัส ผ่าดวงคนดัง ประเทศไทยจะเป็นยังไงหลังจากนี้!](http://i.ytimg.com/vi/gszT2O76fL4/mqdefault.jpg)
Thanks for Watching!
Are you gonna do this to your truck too? Let me know below!
Never even noticed before....went back and looked at some of my pics....well, I be dern....lol. Good video
Lol 😆 Thanks for watching! 👍
Hell yeah man! Just dropped my 02 red L off at a shop to get her running again been sitting in garage non running for 6 years lol since 2014 but this year I’m getting her going again
That's awesome! Good luck! Hopefully everything goes good and you can get er running again!
By god! 6 years! How is that even possible?
TheTruthBeTold lol well I had 3 little ones in that time but now it’s time to get her going again I’ll have vids when she’s done
@@MrDillon2029 Damn. Well it's on now lol! Bet the truck got more value just sitting there.
I recently got an L and it has a bunch of issues that I'm fixing, can't wait to do this mod, it's freaking sweet!
I'm finding out a lot about these trucks then new stuff comes out.
I’m looking forward to doing this on my ⚡️
I hate the bumper gap
Thanks for the video dude
Np, thanks for watching! 🤘 I’ve been wanting to do this for forever, that gap drives me nuts lol 😆
Hi., I salute you. ✌from San Diego ., California...,yes I like the idea and I will make that mod.to mi truck.. thanks for your video and I think your "RED DEVIL" will look super slim👌 nice video and very precise. Again thanks for your experience. On modification off our toy's..keep it up ..😎👍✌
Thanks man! I appreciate all your support for sure! 🤘 Definitely enjoy all the comments and conversations! 😁✌
I got a question for you. I have a non-lightning truck and am fixing to switch over to a lightning bumper. Your video gave me a good visual on the brackets that i would need and where to place them, but I was wondering what the silver piece was that connected to both bumper mounts?
Heat exchanger bracket, heat exchanger hangs from that
Doing this in the a.m, asap. Sick mod, thanks for the info. Post more mods if you have,
Nice! No problem! Lots of mods on the channel and lots more to come 🤘😁
Thanks for the video, can't wait to see it done... but I still think the bolts will need to higher, the top one can hangover the top, and make a new hole for the bottom bolt... or get welding. I did the same thing, still was not enough, but you "CAN" lift the top part of the fiberglass bumper and attach it the grille shell. I used rivets. The fog lights are what stops it from going up, they hit the steel bumper. I thought to notch the steel bumper, but came to my senses and said no.
Thanks for Watching! Yeah I thought about going further, but with the amount I can move it up when I was testing it, I think ill be happy. Only one way to find out, can't wait to see it with it all together either, hopefully soon! Just waiting on these parts, might be a while with all this crap going on now and shut downs. Who knows 🤷♂️
@@DebtLife_Projects Do it, you know you won't be happy till the gap is gone. :-)
What is the socket size of the 4 (2 in each side) nuts that are behind the bracket that grabs the bumper? Basically the ones that you cut the holes for, I have to run down to the store tomorrow because I only have up to 18mm lol
Good question lol I honestly don’t remember. I’ll have to check when I get home today. I wanna say 21mm but don’t quote me lol 😆
DebtLife Projects yeah I was guessing 20 or 21
Nice project, I agree that the gap is not acceptable. So are you going to pound out that dent on the passenger side bumper?
Nah, I didn't even worry about it. Just put some fresh paint and put the cover back on. Can't see it anyways
Hey i have a f150 and i really wanted to see how the bumper mounts up from the inside since theres literally no videos on how to install the bumper cover this is the closest ive seen of no bumper. Since the lighting bumper i bought its a little beat but can really see how its mounted
If u could send me pictures over on instagram if possible to see how its attached tx.tonny is my instagram thank you love the videos 🙏
Nice! Very detailed and informative. Great video 👌 Loving the content!
Thanks! 🤘
Brilliant
The gap has been annoying me since we got the truck.
Bit of a job but well worth doing
Yup, it’s alittle work, but so worth it! My latest video I uploaded, has the results with the bumper all mounted, came out great! 👌
Im doing this
But i may just make more slots same size above the original holes..freakin awesome video
Thanks man! 🤘
You you also slot the brackets themself. Im having a problem with the taiwan inner bumper to the oem cover i have a gap of like 5/8inch and if i try and put the clips in it sucks the cover down and you can clearly see from the front its warped looking.
yOu dId iT wRoNg!!!
Will it work if you try to do this on a normal f150? Im trying to put a fron L bumper on mine 🧐
I would think so, concept should be the same 🤷♂️ not 100% sure though, but I don’t see why not
Alright thanks
Great Video 👍🏽👍🏽keep it up
SVT Javier thanks! 🤘
Are you going to do a video when reinstalling the bumper?
East DallasKick's yup 👍
@@DebtLife_Projects Nice, can't wait. 😎
Is this up (
@@LUKAMANIA Doubt it, I remember checking here and there and not finding a toutorial because I wanted to see how the clips and brackets worked on a lightning so I'd no what to buy.
Yo dude I have 2000 lightning I just took the bumper apart to take care of that gap the 2 studs on each side are already slotted from the factory alls I did was tap them down they give an inch up or down never cut nothing why you didn't see that ?
I did see that, this gives much more adjustment, for a much tighter gap. Plus, those studs that are slotted that you tapped on, tend to drop back down over time, going right back to where they were, giving you bumper gap again, this won't.
Yes will definitely give you more your truck looks great I'm friends with Johnny & Sue wiker (lightning) I'm not racing mine just for street I only did a 2.6 KB charger 497 RWH
It's good enough i drive it every day. Like you videos have a great day
Frank
It is adjustable up and down and left and right .its slotted in both directions.no cutting needed.
I’m fosholy gon do this
We’re you got that L bracket for the heat exchange
Hell yeah
Dimensions on those custom washers ?
Hit me up on insta and I’ll dm u my sketch with dimensions
Who's we?
you didnt even put the bumper bro wtf
There’s a newer video where I did, the bumper was in paint at the time. The video with the thumbnail that says “ready to rock” titled “first cold start, tuning, and front end results” has the bumper on with the before/after results...and That was said in this video, guess you skipped over it 🤷♂️