Cordless Tool Storage Unit Build: A Great Side Hustle For Woodworkers
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Building a Cordless Tool Storage Unit. I build these and sell these on the marketplace. They are a great idea for a side hustle in your woodworking shop.
The Cut list is:
It is all made from 3/4 inch plywood
16x48" For Back
10x48 For Top
4.5 pieces cut 9.25"x48
Those pieces are broke down
2-9.25x 37.25 shelves
1-9.25x46.5" for bottom marked at 2.5" on center and every 4.75" and 6.5" up board to center to get 8 marks that are drilled 1.5" for slots and then cut at end of each circle to end to remove inside of slot holes.
2-9.25x16" ends
1-9.25x15..25 middle divider
7-9.25x3.5" Small dividers
2-9.25x about 7.5" for small shelves but I always just measure at end and cut to fit.
Become a supporter
www. patreon.com/redemptiongarage
Below are some tools that I like from Amazon
Ridgid Oscillating Sander
amzn.to/2OklCqw
Wen Oscillating Belt/Spindle Sander( A Cheaper Option)
amzn.to/2WdErzZ
Dewalt DW735 13" Bench Top Planer
amzn.to/31X32ga
Dewalt DW735x 13" Bench Top Planer with infeed/outfeed table and extra set of blades
amzn.to/2BWhN8b
Milwaukee Right angle Die Grinder kit 2485-22
amzn.to/3fA4k4a
Milwaukee Straight Die Grinder tool only 2486-20
amzn.to/315LbTA
Ingersol Rand Right Angle Die Grinder
amzn.to/2Bsaq7R
Milwaukee m12 6.0ah battery (Great Deal)
amzn.to/3eh5OQN
Milwaukee m12 4.0ah batter (Great Deal)
amzn.to/3hQRVuT
Irwin tap and die set
amzn.to/2JDtKAb
A smaller Irwin set
amzn.to/3bTJPxo
Great Gearwrench pick set
amzn.to/39KjnVw
Gearwrench Punch and Chisel Set
amzn.to/2JEI0si
OTC Cylinder Leak Test Kit
amzn.to/3bQ1XZ9
OTC Combustion Compression Test Master Kit
amzn.to/2UGfSeI
OTC Fuel Injection Kit
amzn.to/39J0vpS
OTC Slide Hammer Kit (Great Slide Hammer)
amzn.to/2UFNlWG
Knipex Cobra Pliers (Best Pliers Hands Down and Best Price)
amzn.to/2wV0gLo
Mountain Long Handle Wrench Set (Great Set)
amzn.to/39Fe0qJ
Astro Master Disconnect Set (Great Budget Kit)
amzn.to/3dUgeWu
Lisle Master Plus Disconnect Kit (Maybe the same as the kit in the flyer)
amzn.to/2UZFvpS
Nice Launch Scanner
amzn.to/348T36B
The above links are affiliate links and should you choose to make a purchase using the above links then the channel will receive a small commission at no extra cost to you.
Do you have any side hustle ideas that you do to earn any extra cash?
More TH-cam videos lol
Detailing and offerup sales
No. Need help
yes, installing antennas to help my customer's cut the cord. at $225 each.
Flags. All kinds of wooden flags seem to be a hot seller. I would like to know what style you have if any.
Would love to see a video where it’s done with just a circular saw and a drill. A true DIY approach for people just starting out would be very helpful
Beautiful work. I’m making one for myself. Thanks
Watching this at 0230 and now im inspired to start this project! Crazy how life works sometimes
holy crap, you have grown a lot, that's a lot of stuff you've been able to acquire/build.
Great storage idea!!! If you put together a kit with instructions etc folks would buy it! Also, you could sell the plans and folks would purchase those as well! love your channel.
That’s crazy! I am also a mechanic turned woodworker lol just made a similar one of these for my “she-shed” and was thinking I could sell these!
Great idea...I was thinking of making one of these for myself, but why not build 2 at a time and sell one!
Wow!!! Brian you have come a long way in a short time. Kuddos my Friend 👍👍 this project looks great. Thanks for sharing your thoughts and videos Rodney
Outstanding idea! Thanks.
Thank you so much brother!!’
That came out great. I need to make one someday.
Keep doing you brother !
Thank you for the video
I wish you were near Daytona Beach, FL. I'd buy one.
Yo bro....🏁
Awesome brotha... looks badass...
Stain em and apply a nice varnish.and double the price....
What is goin on brother? Hope all is well and everyone is safe.
Creative & awesome job! Luv the content & keep the music in the mix. Peace brother
Awesome video brother and that is an awesome idea! Thanks for sharing and making these videos I appreciate you.
Respect + brother!
Great video! Great idea! Thank you for sharing.
From one woodworker to another that's an awesome gig... i haver really though about selling things like that but I'll give it a shot and see how it goes.... also DON'T throw away the saw dust make little bags of different weights and post them on fb market place as "wood flour" you'd be amazed at how many people are looking for things like that and if you have a local woodworking tool you might end up selling your left over scrap wood they'll buy it
Thanks brother. I like the project. I'll build me one.
Nice shop 👍
Great job. Great video. You have a new subscriber. I need one of these first then I might make to sell. Thank you.
In going to Build one, thank you!
great video brother you just gained another SUB from me first of many videos I will watch of yours.
Good stuff subscribed
Thats pretty fucking cool Brian
I liked the Adirondack chairs. The tool storage is nicely thought out. It's so humid in my shop that I have to keep all tools that have a value in a closed space, like a drawer. Just oiled my gage blocks and pin gages to keep them from rusting. Not exactly my favorite part of living here.
What if you just made the cuts, included the screws ect, and sold/shipped as a kit. I think shipping would be much cheaper. Just a thought.
If you painted them in Milwaukee and Dewalt colors you could probly double your asking price. Hell maybe even go big and get a 50 pack of the 3m stickers for both brands and slap on on the top half dead nuts center... nice work man.. I love building stuff as well.
I’m still subscribed. U r back to your old self and why I subscribed. Gettin our of the drama ( even though I see your side and agree to lots of it) but I’m not watching TH-cam for my reality tv drama. This is a great channel and this vid is your best. Can’t wait fir picnic tables and Adirondack chair. Thx. Great job. We all support u!!
Where do I order mine from? GET IT OLE SON!
I'm just trying to build my own. Wondering though, do you still do this as a side hustle? Plywood price is $$$$$$$
Hi, just a thought what if you hook your dust tube up on the ceiling or overhead this should give you some freedom with the sanding
I’m assuming by now you’re batching out the cuts? After you said you make 3 in 8 hours I was trying to figure out what was chewing up all your time and then I saw you measuring and marking for cuts on the miter saw. I hope by now you have T-track & stops setup with a permanent tape measure on the fence?
How much do you sell them for ...great video from 🇨🇦 nova scotia ....thanks for time you put in to video and work ....
Instead of using the jig saw to cut, use your table saw. Cut just enough so there's maybe a 1/8 left. Then put that piece of wood 8n your clamp and use a hand saw or hammer or sheet rock saw to finish. It might be faster, it might not.
Nice work may have to hit you up for one since you are local to me
Sandy my plywood destroys the face. U are using pine here, right?
How do you hang these? Will the plywood be strong enough?
You mentioned tool reviews, do you get free tools doing that? I just dove into woodworking also and I am very short on the tools
What are the measurements to build it
Around 5:30 where the actual woodworking starts.
How do I get the blue print for the tool holder
You can go " knock down" and let the customer assemble. Not sure I would want to go that " customer assemble" way. Besides if this is keeping you busy, why worry about it. You need to charge more.
What size Forstner bit?
Just be careful not to spend the hustle cash earned to the hospital 10:27
you need to start wearing safety glasses!
Good video. Where did you get the apron?
Holy chit first 6 minutes are useless if your here just for ideas
Where do you live
Hey, are you located in Georgia?
In Ohio buddy
Where did you get the little storage bins at?? I been needing some for my shop
Oh I don’t have many tools smh
20 dollars?! To make a no way the sheets of plywood are at least 50$ even in the big box stores
From what I’ve heard, if you sell with eBay you pay them a very small charge .$0.99 and you Have included the eBay money back guarantee for the buyer. Don’t quote tho boi cause I ain’t said shhhh,,, heh jk but really tho I heard but have not confirmed
terrible focus dude
Great side hustle. I may have to look into that.