Notice: edl firmware is no longer on xda post here is an alternative link androidfilehost.com/?fid=4349826312261763308 Hello there Ladies and Gentlemen, Fear not this procedure does not take too long to do once you have figured it all out. All of the stuff you need is in the description as always. Thanks and Bye Bye For flashing raw only you can skip to around 11 mins
Hello Terminal_Heat_Sink ! Thank you for your Help and guidance.You helped us so much ,i managed to debrick my device watching your videos and got a stone off my heart)) Take care and keep up !
@@petrutagarcea8919 nice no problem. Yea I freaked out too when I bricked my phone was going to send it back to Asus but they refused lol. Spent 2 days digging trying to unbrick lol
@@TerminalHeatSink Yeah ,i saw the video, Asus trying to charge quite a bit. BTW how many sot do you get ? I'm with the cheapest 10c Version and get anywhere from 4,5-8h. Not bad but ...6k maH. Thank you again !
If the phone can enter fastboot you are lucky and it is not bricked. You can either flash raw firmware or use twrp to flash stock rom both will achieve the same thing
@@TerminalHeatSink I was get this error when root the phone, if bootloader unlock not hard to back to fastboot, this guide good for phone stuck logo no all
The link isn't mine, but I have a copy of the files hosted on my telegram group (link in description). Click on the pinned messages and you will find it.
Nice video thank you, but I have a question: What happens if you flash it with "clean all/lock" option instead "clean all" only? 9:04 I did that without noticing and now my phone not entering download mode, its stuck in bootloader mode, no recovery, no start
No idea lol I just showed in the video what the guide on xda is saying. I think lock just locks the bootloader. You should be able to use miflash again though.
hi my phone is in EDL mode I've tried to flash it with MIflash it's not working for me. also tried Qfil and got error at 98.96% the link is not working and can't access the telegram please i need the link thanks
my rog phone 2 never had dtsX symbol at start up.... it has qualcomm elite gaming symbol ... and i just peeled cut my original usb type C cable that came with rog phone 2... it doesnt have such collored cables inside!! two cables are very thin, white & Pink... other two are not so thick, same red and pink .. so i will buy new cable and try to find collored cables..
bro please help me whenever i charge my phone it suddenly shutdown and it shows that orange text where it says (this device is unlocked bootloader not gurrantee then go to this link ) how can I fix this
Hello Sir, I have questions for my Asus Rog Phone 2. The device will not turn on no matter what, can I force it into EDL mode if that’s the case? The red light still blinks when I plug in to charge but the light disappears when unplugged. Is this a Motherboard issue instead?
@@TerminalHeatSink it doesn't show up on my device manager strangely enough, I also had my phone taken to multiple repair shops, they were unfamiliar with the device but suggested I picked up a motherboard replacement then they'll replace it.
Hello, I followed you're steps and it flashes and everything looks exactly like you're video posted however when I attempt to turn it off and fastboot (holding power and up volume) it will not load into fastboot and reshows the Qualcomm Crashdump mode. I dunnot what to do I have tried flashing more then once with different USB ports. Still same issue once trying to fastboot so to factory reset it just loads the crashdump mode.
It flashed successfully on Miflash, but it doesn't enter into bootloader when I hold volume up and power button. I guess it's time to get rid of that phone.
If it flashed properly you can try to hold the power button and both volume keys to force shut down and then power button and volume up key to get into bootloader. Hold the keys for around 40 seconds also
Hi! my phone is already detected in 9008 mode in the Device Manager. however, when I try to flash, I am getting this error message: [1:41:40 PM COM5]:System.Exception: set boot partition failed at XiaoMiFlash.code.bl.SerialPortDevice.SetBootPartition() Do I still need an EDL cable to do this? If not, is there anything that I can do? My rog2 won't open. nothing works with the volume up/down power combination. no notification light as well. I appreciate your help! Thanks!
Hii,I was trying to unlock bootloader through edl mode but I'm stuck at fastboot and Im at a loop where when I click reboot it keeps coming back to fastboot mode,I have followed your steps and have successfully come to Qualcomm HS-USB QDLoader 9008(COM4),but when I try to flash the image through mi flash at 19 seconds it says "write time out,maybe device was disconnected"
Hey bro it worked I restarted my pc and updated the Qualcomm drivers manually and then copied mi flash to 'C' drive and also copied the imagies in the mi flash directory and then it flashed
my rog phone 2 auto-rotate not working suddenly. i did downgrade to android 9, upgrade again to android 10, and factory reset, and its still not work. can i fix the problem with reflash? because my rog phon 2 just 2 weeks old :(. and the problem came a few days after upgrade to android 10. and when i downgrade its still not works even when i did factory reset. any suggestion? thanyou
Can you help me? I've been stuck on this for weeks. I have successfully flashed the device without any error. However, whenever I "wipe date/factory reset" it keeps on getting " Failed to clear BCB message: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory "
@@TerminalHeatSink yeh I see where you are coming from I'm rooted on beta 6 aswell but I noticed that I don't pass safetynet anymore do you happen to know how to pass it? It's cause of cts profile
@@harleyappezzato7301 yea my CTS is failing as well on Android 10 hahahaha. Normally you would flash stock boot but don't think there is any firmware out that we can extract the boot.img from. But tbh Android 10 in its current state sucks for this phone. I will be making a video soon on the problems I have and then another video showing how to go back to Android 9. I will probably stick with Android 9 until a custom ROM comes out. I will check out new betas but I'm looking forward to custom ROM more
sir are you still entertaining question? i have a rog 2 tencent that is on EDL mode since my system detect the (9008) note: that my phone is unable to power on or boot but still recognize in my system whenever i tried to flash i ended up failing due to "cannot receive hello packet" as status in MIflashtool do you have any idea what could be the issue and how to fix it? thanks i'll appreciate your reply
Hi does this work for cn tencent set or only global ww set only? I have cn tencent set convert to ww fingerprint, I flashed this using the tool successfully and reboot to bootloader and wiped then flash the latest 2007 or 191035 raw and wipe, but it still have the same problem like before I did all this. The problem is it will boot stock recovery fine and go to fastboot OK, but when boot normally, it will reach to the rog logo only and then black screen qdloader 9008 mode.
Hi, thank you for the guide. I am having an issue. Whatever I do, I always get the error: "Failed to clear BCB message: failed to open /dev/block/boot/device/by-name/misc: No such file or directory". No matter how many times I flash. What could be wrong?
This error is in miflash right? Does it say that straight away or after awhile? If its straight away that means it cannot detect your phone so try different USB cable, different pc port etc. If its after a while then your emmc chip is dead
@@TerminalHeatSink Thanks for the quick reply. I see the error when I navigate to Recovery Mode when going to wipe data. It displays at the bottom of the screen like this: ibb.co/DkZtqk8 and ibb.co/bHsrKVL Looking forward to your reply.
@@TerminalHeatSink Thank you. Could you please guide me on how I can flash raw? Does that mean downloading the official firmware from the Asus Website and then using fastboot? Or there is another way?
after i flashed in miflash and raw flashing then it will restart and just bootlooping i didn't even see the picking language part lol is it really dead? i tried going to recovery mode and its no luck too lol
@@TerminalHeatSink thanks you very much , I some how manage to find a link that worked and now I am in a different problem ... i want to flash the from and I did as shown in the video but when I entered "flashall_AFT.cmd" it shows 'the term flashall_AFt.cmd is not recognized as the name of a cmdlet'
Yea that can be many things. There is sort of a list of things to try. Use different USB cable, use different USB port on pc and lastly use a different pc
I've had to do this before on my OnePlus Nord N10 after trying to install Android 11 on Android 10 bootloader a lol; Ended up having to restore in EDL, take the OTA to 11, then reunlock the bootloader THEN install my ROM; Lesson learned after that one hahaha; It's nice to have a way to unbrick
Hey man. Is there any other way to turn on my ROG Phone 2 with faulty power button? I was planning to do the recovery mode and boot it up from there. But then I guess that is not possible when the power button's not working?
is it a must to use edl cable or original one is enough ? i flashed it and factory reset after that, but everytime i reboot the system, it cant unload the system and ask for factory reset over and over. do i miss something ?
hie trying to get my rog 2 up and running but im getting an error message in less than 2 mins of the flash process error message is 'system expectation st boot partition failed at xaomiflash.code.bl.serialportdevice.setbootpartion'... please help
@@TerminalHeatSink no no brother my mobile is bricked and I have not edl cable can u send me any link how to make edl cable.i also reading ur edl cable link.but I am not understanding how to make edl cable.any video link.pls
I'm having trouble getting my phone to show up on my computer as 9008, it always shows as 900e. Any ideas what I'm doing wrong? I've been putting the cable in while holding the button and waiting 25 seconds before unpressing.
Not sure I haven't used the premade edl cables but it doesn't always work on the first try. Normally when the phones screen is off that means you made it into 9008. Make sure that you have the Qualcomm drivers installed. You can still try to flash in miflash. If it's not proper 9008 mode it won't flash anyway so it's not a big issue
@@TerminalHeatSink I've been trying this more and I'm still having no luck getting it to show as 9008. Is it exactly 25 seconds? Should I try to be on the earlier side or later? For a bit the qualcomm crashdump screen would show but in the last few months it has been unresponsive other than the red led when plugged in and on low power. Is this even the right fix for that? I'm pretty sure the cable isn't the issue as holding the button does delay the device showing in device manager. I updated my qualcomm drivers but had no luck getting 9008 Thanks for your help
@@TerminalHeatSink I have questions if I done those all the video say and if I rest my phone I will recovery everything with data I mean video Picture everything ??
@@TerminalHeatSink ah ok Thank you but for me the first way is complicated so the second one is but what is the app because I try with volume up and power off buttons
I mean the second way is more easy so would you help me that you use that app I don't understand the name you say would you mention so i can download It ??
Hi, My Asus ROG phone 2 stuck on fastboot and lineageos recovery mode, after attempting to install Lineageos. Could you help please? and suggest solution? Thanks
is it necessary to use edl cable to get on edl mode? my rog2 is in total black out for 1week now, when i plug it to my laptop in device manager it shows ""Qualcomm HS-USB QDLoader 9008" but when i try to do the fastboot there is no respond trying different button combination did not work, i charged it for 30min and tried again but still no fastboot, what step should i do first? i dont have edl cable, what is the sign that the phone is already on edl mode and ready for fastboot?
@@TerminalHeatSink I believed I followed everything you said. Now my phone is completely dead and not even edl is available. Red light flickered when I plugged in charger.
Rog 2 itself turned off and switched to edl mode and did not respond, I wanted to flash it like in this video, but the firmware gave an error error failed to intelialize ufs device slot 0 patrition 1 felled to open device. Does this mean the power controller is dead?
it gives me an error when flashing. i tried to edit the flash all file as well..it some times says device disconnected. and some times it says object reference not set to an instance of an object
Make sure you have the qualcomm drivers installed and then try the following 1. Use the side port on the phone 2. Try using different USB cables 3. Try using different USB ports on PC 6. Try with another pc
Hi! 2 days ago, my ROG 2 suddenly shutdown and then no response at all. It's not charging, not booting up, even tried the reset using different volume+power key combos but no response at all. I tried the method posted in here. but no luck. And whenever I tried to flash the phone anyway using the miflash, I always get the "set boot partition failed" error. also tried the qfil then there's the sahara error. also tried detecting the device thru adb and fastboot cmd, my phone is not being detected or listed. but under device manager, i have no problems with the qualcomm qdloader 9008 driver, it pops up just fine whenever i connect the phone thru the side port. also tried different cables and usb ports on my pc. im using windows 10 64bit. any other tips or troubleshooting on this matter? thanks!
Looks like you went through all of the steps. One more thing you can try is using another pc but if that doesn't work you will need to replace the motherboard I'm afraid
@@TerminalHeatSink just to clarify your method here, do i really need to make my own edl cable? i mean i just used regular usb cables and the qdloader 9008 just pops up in the device manager list whenever i connect thru the side port. i think its because of the qualcomm driver installed in the pc but i never tried using edl cable.
hi my rog not working at all like Can't boot into recovery or fastboot and not going to EDL completely what should i do :) but i can see in my device manger that i have 9008 ROM but my phone dead not open at all :(
@@TerminalHeatSink but what can i do :( can you pls help me it's only show 9008 mode but my screen black and when i try to flash it's wont flash saying cannot received hello packet
Hi, I just bought used ROG II phone, it boots into recovery but doesn't load in OS (stuck on ROG logo). Bootloader is locked and I can't flash original ROM because of it. There's no TWRP installed on this phone and I can't install it either because of the locked bootloader. Any suggestions on what to do to unlock the bootloader? Or should I use the method in this video as well? Thank you.
@@TerminalHeatSink Hi again, so I tried to flash raw firmware about 10 times now with 3 different raw files. Flash seems to work as the bottom logo changes from DTS to Qualcomm but the phone still doesn't boot and the bootloader is locked. Any ideas on what to do would be greatly appreciated. Thank you.
Make sure you have the qualcomm drivers installed and then try the following 1. Use the side port on the phone 2. Try using different USB cables 3. Try using different USB ports on PC 6. Try with another pc
@@TerminalHeatSink something went wrong with MiFlash it said "Flash Script Missing" so I needed to redownload the files again but I can't find it anymore on your links.
hi, my phone just died suddenly with no response from the buttons but when i tried connecting it to my pc its display qualcomm9008 in the device manager. can i still fix this? edit: i think its in edl mode
1. Use the side port on the phone 2. Try using different USB cables 3. Try using different USB ports on PC 4. Download and install 15 second adb and fastboot drivers 5. Go into windows update and install any additional drivers/updates available 6. Try with another pc
Your phone may have a button combo it needs to reset it and force restart it back to EDL. Usually both volume buttons and power with the USB connected. I've ran into this issue before and figured I'd share how I fixed it Incase someone else benefits from this
Make sure you have the qualcomm drivers installed and then try the following 1. Use the side port on the phone 2. Try using different USB cables 3. Try using different USB ports on PC 6. Try with another pc
him can someone help. my rog phone 2 was sdtuck on bootloader. I went into fastboot, wiped data and cache, then I downloaded raw firmware, ran flashall cmd. my phone rebooted, nows its stuck on the republic of gamers logo with the bar that lights up left to right. do I just wait or is it bugged?
@@TerminalHeatSink thanks I done a raw flash, it got.stuck on the load screen but then recovery was working so a new format via recovery fixed it. I locked my bootloader and enough of hacking too much I needed my phone cost me half a day 🤣 Might buy a cheap spare phone
@@TerminalHeatSink the issue that happened was because twrp wasn't loading it was weird like it couldn't recognise the partition then when I tried to boot it then it all FD up Probably followed a diff step maybe used flash instead of boot in ADP. So this is how I had to fix it.
Terminal_Heat_Sink did it work for my bad flahed asus rog phone 3? the computer dont recognize... sorry for my bad english, im spanish, can you help me?
@@TerminalHeatSink I just followed the steps of the cable and it is incredible but it works perfect on my Asus rogphone 3, now the only thing I need is the QFIL rom for my rogphone 3 but I have not been able to find it anywhere, can you help me? the cable has served me perfectly
Good day sir. My rog 2 global version is almost 2 yrs old. I was playing Genshin and my phone just shutted down with no way of turning back on. I searched the net and tried the method of pressing volume buttons up and down and power button then the phone started up but after a few mins it started to shutdown again when I opened and used some apps. I tried factory reset but the problem is still there and now getting worst the phone just keeps restarting after a few seconds when reaching home screen. Can you help me what to do sir? Any suggestions is a big help.
It's a known hardware issue. But just incase it isn't try flashing a different rom. Even try flashing a9. Then if the problem is still there you will need to send it for repair
Hi, I am facing a problem where my rog phone 2 is not turning on. It happened sudden. Now I tried everything like by pressing power button, volume up plus power button, volume up down plus power button, but my device is still not turning up. Tried with charging too, it shows nothing. Can you pls pls pls help me out in this..?
what causes rog phone can happen qualcomm crash dump? my friend said he only used chat then suddenly his cellphone died and came out qualcomm crashdump, is it possible?
if you look at the phone in the wrong way it can go into crash dump :) It should only happen to people who mod with software but there are a few instances where it happened to people just using their phones normally
Hey man I hope you are still around. My Rog 2 just turned off at 63% and wouldnt turn back on at all no matter what i tried for about 30-40min. I tried all the combinations of volume and power buttons to reset or force a boot. Also tried to connect it to my pc while also trying to reset or force a boot. Then i decided to leave it on charge for awhile and left the room for a few minutes. When i came back my phone was on and charging. Sitting at 67%. I picked it up and wanted to check a few things but as soon as I unlocked the password my phone just died again. Havent been able to get it to boot at all since then. What could the issue be? I live in South Africa and bought the phone through a private importer. So i have no warranty. Thoughts/suggestions?
If you manage to get into the bootloader you can try flashing raw firmware but it sounds like a problem with the power delivery system nothing can be done in that case except replacing the motherboard but in that case it's probably cheaper to get a new phone
@@TerminalHeatSink yeah it looks like im going to have to look into getting a new phone. No longer under warranty. Fortunately I have it insured so hopefully it will be covered. Anyways thanks so much for your fast reply and input man. Really appreciate it.
does it work for android 10 too?' I can see mine in the device manager in 9008 mode but i can't flash the files cause it says "cannot receive hello packet"
@@TerminalHeatSink did install the latest Qualcomm drivers, still the same... idk what to do, been 2 days since my phone went edl, then i found your video.. pls help
Notice: edl firmware is no longer on xda post here is an alternative link androidfilehost.com/?fid=4349826312261763308
Hello there Ladies and Gentlemen, Fear not this procedure does not take too long to do once you have figured it all out. All of the stuff you need is in the description as always. Thanks and Bye Bye
For flashing raw only you can skip to around 11 mins
Hello Terminal_Heat_Sink !
Thank you for your Help and guidance.You helped us so much ,i managed to debrick my device watching your videos and got a stone off my heart)) Take care and keep up !
@@petrutagarcea8919 nice no problem. Yea I freaked out too when I bricked my phone was going to send it back to Asus but they refused lol. Spent 2 days digging trying to unbrick lol
@@TerminalHeatSink Yeah ,i saw the video, Asus trying to charge quite a bit. BTW how many sot do you get ? I'm with the cheapest 10c Version and get anywhere from 4,5-8h. Not bad but ...6k maH. Thank you again !
@@petrutagarcea8919 around 10 if I don't play any games and only watch TH-cam otherwise its around 6ish
Could you provide a new link to the download for edl? The link in the xda forum doesn't work anymore. Thanks!
thank you so much bro i fixed my rog 2 keep posting videos, keep rocking
bro could you PLEASE email me the ASUS_ROG2_ZS660KL_QPST_Firmware.zip file? the download link for it doesnt work anymore. :(
Thank you so much, I can't believe my phone is fixed. your really awesome.
You are welcome enjoy your working phone lol
Rock#XDA Developer 😍😘
Thanx buddy solved my problem 🤩🤩🤩🤩🤩
Good job brooo thank you,, without this i wouldn't have had ma phone back
No problem. I'm happy this worked for you
Thank you very much. You have accomplished a successful job, and the credit goes to you
took me 69 years to find a person who's not an indian on the bricking category
lmfao
if phone still can enter Fastboot mode : flash raw firmware
if phone have usb debugging enable enter 9008 mode by : adb reboot edl
If the phone can enter fastboot you are lucky and it is not bricked. You can either flash raw firmware or use twrp to flash stock rom both will achieve the same thing
@@TerminalHeatSink I was get this error when root the phone, if bootloader unlock not hard to back to fastboot, this guide good for phone stuck logo no all
Good afternoon, unfortunately this link is not available, could you post the ASUS ROG PHONE 2 EDL firmware again, Thank you
The link isn't mine, but I have a copy of the files hosted on my telegram group (link in description). Click on the pinned messages and you will find it.
Nice video thank you, but I have a question:
What happens if you flash it with "clean all/lock" option instead "clean all" only? 9:04 I did that without noticing and now my phone not entering download mode, its stuck in bootloader mode, no recovery, no start
No idea lol I just showed in the video what the guide on xda is saying. I think lock just locks the bootloader. You should be able to use miflash again though.
Hi,
do you know how to fix the RAM dump for the Zenfone 8?
Thanks and regards,
Hyper
Nope don't have a Zenfone. You can try flashing raw firmware that solves all software issues
hi
my phone is in EDL mode I've tried to flash it with MIflash it's not working for me. also tried Qfil and got error at 98.96%
the link is not working and can't access the telegram please i need the link
thanks
my rog phone 2 never had dtsX symbol at start up.... it has qualcomm elite gaming symbol ... and i just peeled cut my original usb type C cable that came with rog phone 2... it doesnt have such collored cables inside!! two cables are very thin, white & Pink... other two are not so thick, same red and pink .. so i will buy new cable and try to find collored cables..
try finding a usb 2 cable. its easier since there is less wires to manage.
i cant get it into fastboot menu 12:26 but i ran the 1ROG3_VFLASH_EDL.cmd script file and nothing happpened
You try that metod,just to use and install raw firmware in fastboot mode?For me help,but for rog 5
If you can access fastboot then obviously you don't need to flash edl
bro please help me whenever i charge my phone it suddenly shutdown and it shows that orange text where it says (this device is unlocked bootloader not gurrantee then go to this link ) how can I fix this
should i've done by those EDL cable when my phone has bricked? can i still use the original ones?
You can make your own edl cable from original cables there are loads of videos on this site showing how
Can you help me ? I have a dulp crash problem on my Lenovo Legion Pro phone, please show me.
I don't have a lenovo legion pro
@@TerminalHeatSink Can give file to me ?
How can I give you file if I don't even have the phone you are using?
Need help. In the images folder it only says "flash_all" but not "flash_all.bat" and says cannot receive hello packet
There should be flashall_aft.cmd. The other one is for Linux
@@TerminalHeatSink theres no flashall_aft.cmd in the images folder . please help
@@mattikarkiabanes4825 download the right files. For this guide you need edl flashable firmware and raw firmware. Raw firmware has flashall_aft.cmd
Is there any other links, to the EDL firmware? The one on XDA isn't available anymore.
Yep see pinned message
Thanks m8
Hello, I faced the same problem, but on rog 5s. Where can I find the appropriate files?
Not sure, I don't have 5 so never looked it up
Hello Sir, I have questions for my Asus Rog Phone 2. The device will not turn on no matter what, can I force it into EDL mode if that’s the case? The red light still blinks when I plug in to charge but the light disappears when unplugged. Is this a Motherboard issue instead?
Sounds a bit like your phone is already in EDL. You can check in device manager when the phone is connected to pc.
@@TerminalHeatSink it doesn't show up on my device manager strangely enough, I also had my phone taken to multiple repair shops, they were unfamiliar with the device but suggested I picked up a motherboard replacement then they'll replace it.
Hello, I followed you're steps and it flashes and everything looks exactly like you're video posted however when I attempt to turn it off and fastboot (holding power and up volume) it will not load into fastboot and reshows the Qualcomm Crashdump mode. I dunnot what to do I have tried flashing more then once with different USB ports. Still same issue once trying to fastboot so to factory reset it just loads the crashdump mode.
Seems like miflash didn't flash properly. When you are flashing with miflash how long does it take for you until its finished?
Hey man, it says cannot receive hello packet. what should I do?
Check drivers, try different cable, try different USB port, try different pc
@@TerminalHeatSink Ok, thanks for the quick response!!
It flashed successfully on Miflash, but it doesn't enter into bootloader when I hold volume up and power button. I guess it's time to get rid of that phone.
If it flashed properly you can try to hold the power button and both volume keys to force shut down and then power button and volume up key to get into bootloader. Hold the keys for around 40 seconds also
@@TerminalHeatSink Doesn't seem to work, maybe it's the screen that's busted...
Hi! my phone is already detected in 9008 mode in the Device Manager. however, when I try to flash, I am getting this error message: [1:41:40 PM COM5]:System.Exception: set boot partition failed
at XiaoMiFlash.code.bl.SerialPortDevice.SetBootPartition()
Do I still need an EDL cable to do this? If not, is there anything that I can do?
My rog2 won't open. nothing works with the volume up/down power combination. no notification light as well.
I appreciate your help! Thanks!
Install the Qualcomm drivers
@@TerminalHeatSink mine also gave this error managed to solve? I'm on a black screen, the device doesn't give any sign of life
any luck ??
@ any luck
Any luck resolving this issue/error message ?
My ROG 1 got crashdump too should I use EDL cable too for flashing rom?
If you can find an edl flashable rom for rog 1 then yes
Terminal_Heat_Sink what will i do if only bootlooping from logo then restarting again? the qualcomm 900E wont recognize anymore
Terminal_Heat_Sink ok thanks
Hii,I was trying to unlock bootloader through edl mode but I'm stuck at fastboot and Im at a loop where when I click reboot it keeps coming back to fastboot mode,I have followed your steps and have successfully come to Qualcomm HS-USB QDLoader 9008(COM4),but when I try to flash the image through mi flash at 19 seconds it says "write time out,maybe device was disconnected"
Try using a different USB cable or plug it into another USB port. If you are using pc plug it into the back of the motherboard
I use a laptop and I have tried all three ports
Is there any trouble with mi flash tool?
Can I get your support from instagram where I can share the exact problem
Hey bro it worked I restarted my pc and updated the Qualcomm drivers manually and then copied mi flash to 'C' drive and also copied the imagies in the mi flash directory and then it flashed
my rog phone 2 auto-rotate not working suddenly. i did downgrade to android 9, upgrade again to android 10, and factory reset, and its still not work. can i fix the problem with reflash? because my rog phon 2 just 2 weeks old :(. and the problem came a few days after upgrade to android 10. and when i downgrade its still not works even when i did factory reset.
any suggestion? thanyou
+Rafid Farhan go into settings and enable it in display. Or use the quick tile
@@TerminalHeatSink thanykou for your respons. But still not working. Maye i should go to asus service center
+Rafid Farhan yep seems like phone is kaput better return it quick before the warranty runs out
Can you help me? I've been stuck on this for weeks. I have successfully flashed the device without any error. However, whenever I "wipe date/factory reset" it keeps on getting " Failed to clear BCB message: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory "
did you flash edl firmware in miflash? and then flashed raw firmware in fastboot after?
Do you use the rog 2 as your daily driver?
Yep ofcourse I wouldn't spend over 1k euro on a phone I don't use
@@TerminalHeatSink yeh I see where you are coming from I'm rooted on beta 6 aswell but I noticed that I don't pass safetynet anymore do you happen to know how to pass it? It's cause of cts profile
@@harleyappezzato7301 yea my CTS is failing as well on Android 10 hahahaha. Normally you would flash stock boot but don't think there is any firmware out that we can extract the boot.img from. But tbh Android 10 in its current state sucks for this phone. I will be making a video soon on the problems I have and then another video showing how to go back to Android 9. I will probably stick with Android 9 until a custom ROM comes out. I will check out new betas but I'm looking forward to custom ROM more
@@TerminalHeatSink really? I've been loving Android 10 but as soon as a custom rom comes out I'm gone from stock firmware haha
@@harleyappezzato7301 yea same waiting for custom rom eagerly this phone badly needs it lol
I'm not getting the 9008 port option. Nothing showing in the device manager section. I followed every step. Is there any other way?
also can I save my user data from wiping using miflash or any other method?
please advise me , thank you so very much
Once the phone is stuck on Qualcomm dump screen or just black screen I don't think it's possible to save data unfortunately
@@TerminalHeatSink yeah , thought so too man
thanks PRO
will this work if my phone is not opening? there is a sound where it connects, with an error code 28 on device manager. hope u notice thank you
hey, do you think that by taking it to the asus service they could repair the asus brick?
Yea thats the point of a repair centre lol
What time is the phone repair
sir are you still entertaining question? i have a rog 2 tencent that is on EDL mode since my system detect the (9008) note: that my phone is unable to power on or boot but still recognize in my system whenever i tried to flash i ended up failing due to "cannot receive hello packet" as status in MIflashtool do you have any idea what could be the issue and how to fix it? thanks i'll appreciate your reply
Install Qualcomm drivers and try using a different cable
Hi bro....By mistake i wiped the internal storage from the TWRP and now its showing "slot _a is unbootable"....is there any way to get through that
you will need to flash stock rom twice check out this video on how this is done th-cam.com/video/7_PtEwdZvGo/w-d-xo.html
@@TerminalHeatSink helped alot bro thank u soo much
Hi does this work for cn tencent set or only global ww set only? I have cn tencent set convert to ww fingerprint, I flashed this using the tool successfully and reboot to bootloader and wiped then flash the latest 2007 or 191035 raw and wipe, but it still have the same problem like before I did all this.
The problem is it will boot stock recovery fine and go to fastboot OK, but when boot normally, it will reach to the rog logo only and then black screen qdloader 9008 mode.
You need to factory reset after flashing raw otherwise it won't boot
@@TerminalHeatSink I went to stock recovery and wipe
Factory reset and wipe are slightly different
@@TerminalHeatSink I clicked like your video, wipe/factory reset in stock recovery. There is only one option.....
Hmm OK and it's still not booting? Flash raw again
Hi, thank you for the guide. I am having an issue. Whatever I do, I always get the error: "Failed to clear BCB message: failed to open /dev/block/boot/device/by-name/misc: No such file or directory". No matter how many times I flash. What could be wrong?
This error is in miflash right? Does it say that straight away or after awhile? If its straight away that means it cannot detect your phone so try different USB cable, different pc port etc. If its after a while then your emmc chip is dead
@@TerminalHeatSink Thanks for the quick reply. I see the error when I navigate to Recovery Mode when going to wipe data. It displays at the bottom of the screen like this: ibb.co/DkZtqk8 and ibb.co/bHsrKVL Looking forward to your reply.
Oh I see. You will need to flash raw again. If that doesn't work you will need to use miflash and then flash raw again
Oh I see. You will need to flash raw again. If that doesn't work you will need to use miflash and then flash raw again
@@TerminalHeatSink Thank you. Could you please guide me on how I can flash raw? Does that mean downloading the official firmware from the Asus Website and then using fastboot? Or there is another way?
thanks so much my brother its done for me
Hey i need help my Rog Phone 2 is doing i replacement my screen is there i way you can send the filie you have i cant fine it no were
It's on my telegram group lol. After you join browse through the pinned comments and you will find it
after i flashed in miflash and raw flashing then it will restart and just bootlooping i didn't even see the picking language part lol is it really dead? i tried going to recovery mode and its no luck too lol
Yea that's meant to happen you missed the last step for factory reset
i cant seem to find any edl firmware , none of the link works , I am so frustrated
Yea phone is pretty much as dead as the links these days. If you go over to my telegram chat I have uploaded edl there. Check the pinned messages
@@TerminalHeatSink thanks you very much , I some how manage to find a link that worked and now I am in a different problem ... i want to flash the from and I did as shown in the video but when I entered "flashall_AFT.cmd" it shows 'the term flashall_AFt.cmd is not recognized as the name of a cmdlet'
@@rsrafi182 oh yea, you need to be in the same folder as the script. You can use cd C:\yourlocation
thx for this, i thought i cant use my phone again, i owe you one...
You are welcome
Hi My phone is stuck at slot -b is unbootable right after uninstalling the magisk canary version , could you please help.
Flash your roms boot image. Or just flash the rom again if you aren't familiar with extracting the boot image
hi. i tried but stuck on set partition fail on flashing. what to do? kindly help
Yea that can be many things. There is sort of a list of things to try. Use different USB cable, use different USB port on pc and lastly use a different pc
I've had to do this before on my OnePlus Nord N10 after trying to install Android 11 on Android 10 bootloader a lol; Ended up having to restore in EDL, take the OTA to 11, then reunlock the bootloader THEN install my ROM; Lesson learned after that one hahaha; It's nice to have a way to unbrick
Hello, Friend
My ROG 2 can turn on but can not run the system like fail to boot?
Anyone can help?
try flashing the stock rom
Bro my cousin have this problem on Lenovo and you help him u are hero
Find the firmware for lenevo. The steps should be the same as for rog
Subbed and liked the video
u are the boss brother appreciate ya so much
donated by Paypal for ya aswell
Thanks that's awesome bro.
hey after unrooting/relocking bootloader in my Rog 2 will i get OTA updates from Asus ?
Nope you will have to update manually
Hey man. Is there any other way to turn on my ROG Phone 2 with faulty power button? I was planning to do the recovery mode and boot it up from there. But then I guess that is not possible when the power button's not working?
Yea power button is quite vital lol
Can you do this if the bootloader is locked? I locked it by mistake before flashing stock rom twice.
Should work ok
is it a must to use edl cable or original one is enough ?
i flashed it and factory reset after that, but everytime i reboot the system, it cant unload the system and ask for factory reset over and over.
do i miss something ?
You might need to flash raw firmware again. Try factory reseting once more though and see if it helps
@@TerminalHeatSink the raw firmware link doesnt work anymore. would you kindly share the new one. i want to try to flash it
Try this one drive.google.com/drive/folders/0B16KcYGeJ8Q9fml4MzdQUFA3Z29aS3Jkd01iY3oyT09zaWwzaldFZl9tV0JXNG9jUEdkSFE
@@TerminalHeatSink i think the problem is my phone bootloader still locked. and i dont know how to unlock it since i cant boot to the system
@@androsimatupang2915 you should be able to flash raw with locked bootloader
hie trying to get my rog 2 up and running but im getting an error message in less than 2 mins of the flash process error message is 'system expectation st boot partition failed at xaomiflash.code.bl.serialportdevice.setbootpartion'... please help
What do I have to do if I keep getting the write timed out issue?
Try different USB cable, USB port, pc etc. You can look through the comments here and see what worked for others
Thanks bro
What should I do the turn on screen while in crash dump mode
You need to reboot to edl mode using an edl cable
But my phone is shut down.and it doesn't show dump scrab mode
@@हिंदुस्थानजिंदाबाद-न1ब then it is not bricked? Charge the phone
@@TerminalHeatSink no no brother my mobile is bricked and I have not edl cable can u send me any link how to make edl cable.i also reading ur edl cable link.but I am not understanding how to make edl cable.any video link.pls
+Prasad Belsare I don't have video I just used the guide I linked
I'm having trouble getting my phone to show up on my computer as 9008, it always shows as 900e. Any ideas what I'm doing wrong? I've been putting the cable in while holding the button and waiting 25 seconds before unpressing.
Not sure I haven't used the premade edl cables but it doesn't always work on the first try. Normally when the phones screen is off that means you made it into 9008. Make sure that you have the Qualcomm drivers installed. You can still try to flash in miflash. If it's not proper 9008 mode it won't flash anyway so it's not a big issue
@@TerminalHeatSink I've been trying this more and I'm still having no luck getting it to show as 9008. Is it exactly 25 seconds? Should I try to be on the earlier side or later?
For a bit the qualcomm crashdump screen would show but in the last few months it has been unresponsive other than the red led when plugged in and on low power. Is this even the right fix for that?
I'm pretty sure the cable isn't the issue as holding the button does delay the device showing in device manager.
I updated my qualcomm drivers but had no luck getting 9008
Thanks for your help
25 seconds is just what I found works best you can try 10 - 60
Hello, All EDL firmware download link is not working :( do you have a new one? thank you so much
Can you help me please how I can make my backup all my data so I can factory rest my phone ???
th-cam.com/video/t5AJCwmGbXM/w-d-xo.html
@@TerminalHeatSink I have questions if I done those all the video say and if I rest my phone I will recovery everything with data I mean video Picture everything ??
@@UmmiEdits you will need to copy the pics, videos, music to your pc.
@@TerminalHeatSink ah ok Thank you but for me the first way is complicated so the second one is but what is the app because I try with volume up and power off buttons
I mean the second way is more easy so would you help me that you use that app I don't understand the name you say would you mention so i can download It ??
I was wondering if this works for Zenfone 4 (ZE554KL) ??
+Bruno Michel nope it's special files for this phone
I Mean the part that connects to EDL qualcomm 9008 mode. I try the same process but it seems that doesn’t Work for ZE554KL...
+Bruno Michel yea all phones have edl. You just need to make or buy a cable and install some drivers
Hi, My Asus ROG phone 2 stuck on fastboot and lineageos recovery mode, after attempting to install Lineageos. Could you help please? and suggest solution? Thanks
lineage for rog 2 is very poor so just flash another rom in twrp
I have a Meizu Note 9 and I am experiencing this same problem. Help me!
I don't have that phone sorry
@@TerminalHeatSink Okay, thanks!
when i finished the miflash i go to recovery mode and its still bootlooping any tips?
Please follow the video. After miflash you need to flash raw firmware then factory reset. Please don't make up your own steps
is it necessary to use edl cable to get on edl mode? my rog2 is in total black out for 1week now, when i plug it to my laptop in device manager it shows ""Qualcomm HS-USB QDLoader 9008" but when i try to do the fastboot there is no respond trying different button combination did not work, i charged it for 30min and tried again but still no fastboot, what step should i do first?
i dont have edl cable, what is the sign that the phone is already on edl mode and ready for fastboot?
Your phone is already in edl. So you can use any cable
@@TerminalHeatSink Hi! i still encounter errors in mi flash, i cant enter fastboot, ang still on black screen no button combination is working
Yea seems like you are in edl hence the black screen. Install Qualcomm drivers otherwise miflash won't work
Is it the drivers you installed at the beginning of the video? I think i already installed them if that's what you are referring to.
Yep that's them
Hello sir, after doing all the procedure completely and Turning it on, it somehow crash and boot to crashdump mode again. Please help me.
did you flash raw firmware after flashing edl firmware?
@@TerminalHeatSink I believed I followed everything you said. Now my phone is completely dead and not even edl is available. Red light flickered when I plugged in charger.
@@lyante__x__ngaihte anything show up in device manager when you plug it into pc through the side port?
@@TerminalHeatSink no nothing pops up.
@@lyante__x__ngaihte OK seems like phone is dead. Probably needs the motherboard replaced
dear sir please help me my Rog 3 stuck with ( csc fastboot mode ) please help you helped me befor a lot
My phone also has the same problem how do I fix this problem
By watching the video and doing the same thing lol
Rog 2 itself turned off and switched to edl mode and did not respond, I wanted to flash it like in this video, but the firmware gave an error error failed to intelialize ufs device slot 0 patrition 1 felled to open device. Does this mean the power controller is dead?
Na probably just connection issue. it shows up in the correct mode and you have the qualcom drivers installed right
it gives me an error when flashing. i tried to edit the flash all file as well..it some times says device disconnected. and some times it says object reference not set to an instance of an object
Make sure you have the Qualcomm drivers installed. You can also try using a different USB port, different cable, use 64bit Windows 10.
When I do the MiFlash it says "try to reset device status", any advice for me to do to fix that problem?
Make sure you have the qualcomm drivers installed and then try the following
1. Use the side port on the phone
2. Try using different USB cables
3. Try using different USB ports on PC
6. Try with another pc
Hi! 2 days ago, my ROG 2 suddenly shutdown and then no response at all. It's not charging, not booting up, even tried the reset using different volume+power key combos but no response at all. I tried the method posted in here. but no luck. And whenever I tried to flash the phone anyway using the miflash, I always get the "set boot partition failed" error. also tried the qfil then there's the sahara error. also tried detecting the device thru adb and fastboot cmd, my phone is not being detected or listed. but under device manager, i have no problems with the qualcomm qdloader 9008 driver, it pops up just fine whenever i connect the phone thru the side port. also tried different cables and usb ports on my pc. im using windows 10 64bit. any other tips or troubleshooting on this matter? thanks!
Looks like you went through all of the steps. One more thing you can try is using another pc but if that doesn't work you will need to replace the motherboard I'm afraid
@@TerminalHeatSink just to clarify your method here, do i really need to make my own edl cable? i mean i just used regular usb cables and the qdloader 9008 just pops up in the device manager list whenever i connect thru the side port. i think its because of the qualcomm driver installed in the pc but i never tried using edl cable.
If your phone is already in edl mode then no. In my case it was stuck in crash dump mode which isn't edl
@@TerminalHeatSink that's my problem, i have no way of knowing if my fone is already in edl mode or not yet.
If screen is black and phone looks like it's dead and shows up as 9008 in device manager then it's edl alright
Now for some reason, i can't turn on OEM unlock in dev options
That's because it was never in dev options. You need to use the apk provided by Asus to unlock the bootloader
hi my rog not working at all like Can't boot into recovery or fastboot and not going to EDL completely
what should i do :) but i can see in my device manger that i have 9008 ROM but my phone dead not open at all :(
Yea that's what 9008 mode looks like
@@TerminalHeatSink but what can i do :( can you pls help me it's only show 9008 mode but my screen black and when i try to flash it's wont flash saying cannot received hello packet
Check drivers, try different cable, try different USB port, try different pc
@@TerminalHeatSink i try everything , i can only try now my dad pc
Yea try dad pc. Make sure the dad pc is 64bit too I think there is problems with 32bit dad pcs
Hi, I just bought used ROG II phone, it boots into recovery but doesn't load in OS (stuck on ROG logo).
Bootloader is locked and I can't flash original ROM because of it.
There's no TWRP installed on this phone and I can't install it either because of the locked bootloader.
Any suggestions on what to do to unlock the bootloader? Or should I use the method in this video as well?
Thank you.
You can flash raw firmware. This is shown in the video after miflash
@@TerminalHeatSink Thank you for a quick reply, I'll try that.
@@TerminalHeatSink Hi again, so I tried to flash raw firmware about 10 times now with 3 different raw files. Flash seems to work as the bottom logo changes from DTS to Qualcomm but the phone still doesn't boot and the bootloader is locked. Any ideas on what to do would be greatly appreciated. Thank you.
After flashing raw firmware did you do a factory reset?
@@TerminalHeatSink I can't do factory reset because when I try to enter recovery mode - it's the same story - stuck on ROG logo.
for my MiFlash it's saying "try to reset status", then "write time out, maybe device was disconnected." with the result "error"
Make sure you have the qualcomm drivers installed and then try the following
1. Use the side port on the phone
2. Try using different USB cables
3. Try using different USB ports on PC
6. Try with another pc
@@TerminalHeatSink now I have the problem of it not receiving the hello packet
@@7skuza245 yea it's the same problem as the connection. You just need to keep trying the steps and eventually it will work
@@TerminalHeatSink I'll try it again
@@TerminalHeatSink something went wrong with MiFlash it said "Flash Script Missing" so I needed to redownload the files again but I can't find it anymore on your links.
My asus rog 2 tencent edition (global rom) suddenly turned off...giving no response ..even charging also not working...what can i do???
It could be stuck in edl mode, if it is then its easy fix
hi, my phone just died suddenly with no response from the buttons but when i tried connecting it to my pc its display qualcomm9008 in the device manager. can i still fix this?
edit: i think its in edl mode
yep 9008 is edl mode. so you can skip the first bit of the video where we get into 9008/edl mode
Plz make a video on rog 5 ram dump fix
What do you think this video is about lmao?
hey bro what am going to do when it shows "your device isn't recognize"
1. Use the side port on the phone
2. Try using different USB cables
3. Try using different USB ports on PC
4. Download and install 15 second adb and fastboot drivers
5. Go into windows update and install any additional drivers/updates available
6. Try with another pc
Your phone may have a button combo it needs to reset it and force restart it back to EDL. Usually both volume buttons and power with the USB connected. I've ran into this issue before and figured I'd share how I fixed it Incase someone else benefits from this
Hey bro Im facing a problem now again,my ports(com&lpt)isn't popping up and instead ASUS android device is popping in the device manager
Pls help me
Sounds like you are in fastboot. In that case you can skip miflash and proceed with flashing raw firmware
Hi my rog phone 2 has red blinking light and does not turn on with any button , any help ?
Does it show up in device manager on pc?
@@TerminalHeatSink it shows up as a android phone device
@@TerminalHeatSink but i dont have the edl cable , is it possible you can make a tutorial on how to make the cable please
There is a guide on xda website basically you just short 2 wires. It has photos of the procedure so it's easy to follow
@@TerminalHeatSink is it possible you can send a link please ?
i am getting below error - write timeout may be device was disconnected , while flashing i am getting this error
Make sure you have the qualcomm drivers installed and then try the following
1. Use the side port on the phone
2. Try using different USB cables
3. Try using different USB ports on PC
6. Try with another pc
sir how can i fix my ROG Phone 2 "Slot _a is unbootable" stock here
This video will help you out. If you can get into fastboot you can skip the first few minutes of the video where we use miflash
him can someone help. my rog phone 2 was sdtuck on bootloader. I went into fastboot, wiped data and cache, then I downloaded raw firmware, ran flashall cmd. my phone rebooted, nows its stuck on the republic of gamers logo with the bar that lights up left to right. do I just wait or is it bugged?
+Benni B did you do a factory reset after the raw flash was successful
@@TerminalHeatSink thanks I done a raw flash, it got.stuck on the load screen but then recovery was working so a new format via recovery fixed it.
I locked my bootloader and enough of hacking too much I needed my phone cost me half a day 🤣
Might buy a cheap spare phone
+Benni B yea it's important to follow these videos exactly as they are, I included this step which would have saved you half a day
@@TerminalHeatSink the issue that happened was because twrp wasn't loading it was weird like it couldn't recognise the partition then when I tried to boot it then it all FD up
Probably followed a diff step maybe used flash instead of boot in ADP. So this is how I had to fix it.
Sir Does This Trick Will Work For OnePlus 9 Also? Using MSM Download Tool.
Probably all android phones are pretty much the same. I don't have op9 so don't know for certain
Terminal_Heat_Sink did it work for my bad flahed asus rog phone 3? the computer dont recognize... sorry for my bad english, im spanish, can you help me?
This only works for rog 2
@@TerminalHeatSink I just followed the steps of the cable and it is incredible but it works perfect on my Asus rogphone 3, now the only thing I need is the QFIL rom for my rogphone 3 but I have not been able to find it anywhere, can you help me? the cable has served me perfectly
@@DiegoGarciavarela don't think anyone released it yet. You can look out for it on xda
@@TerminalHeatSink thanks friend, i wait
Good day sir. My rog 2 global version is almost 2 yrs old. I was playing Genshin and my phone just shutted down with no way of turning back on. I searched the net and tried the method of pressing volume buttons up and down and power button then the phone started up but after a few mins it started to shutdown again when I opened and used some apps. I tried factory reset but the problem is still there and now getting worst the phone just keeps restarting after a few seconds when reaching home screen. Can you help me what to do sir? Any suggestions is a big help.
It's a known hardware issue. But just incase it isn't try flashing a different rom. Even try flashing a9. Then if the problem is still there you will need to send it for repair
@@TerminalHeatSink thanks for the quick response, really appreciate it. Ill try flashing.
Hello I have a Lenovo z5 pro gt , it says Qualcomm crashdump mode , any help to fix it ?
You will need to find edl flashable firmware for it
Hi, I am facing a problem where my rog phone 2 is not turning on. It happened sudden. Now I tried everything like by pressing power button, volume up plus power button, volume up down plus power button, but my device is still not turning up. Tried with charging too, it shows nothing. Can you pls pls pls help me out in this..?
Have you tried following this video?
@@TerminalHeatSink I am trying with volume up,down and power button together. If this wont work, I will start this process.
Can edl mode repair my lost baseband and wifi? Thanks
Not sure about imei but you can try
Halo i need file flash for ROG 1 fasboot mode ..my phone ROG 1 same lake your case .. please help me 🙏🙏
I don't have ROG 1 this is ROG 2 lol
Bruh does your phone rooted before you did flashing?
Mine was but you can still do this without rooting
what causes rog phone can happen qualcomm crash dump? my friend said he only used chat then suddenly his cellphone died and came out qualcomm crashdump, is it possible?
if you look at the phone in the wrong way it can go into crash dump :) It should only happen to people who mod with software but there are a few instances where it happened to people just using their phones normally
i got crashdump mode, i cant reboot it, i try fastboot mode but it doesnt work, how can i repar this? i have a rog phone 1
This video shows exactly how to fix it lmao. Instead of using rog 2 files, use rog 1 files
Hey man I hope you are still around. My Rog 2 just turned off at 63% and wouldnt turn back on at all no matter what i tried for about 30-40min. I tried all the combinations of volume and power buttons to reset or force a boot. Also tried to connect it to my pc while also trying to reset or force a boot. Then i decided to leave it on charge for awhile and left the room for a few minutes. When i came back my phone was on and charging. Sitting at 67%. I picked it up and wanted to check a few things but as soon as I unlocked the password my phone just died again. Havent been able to get it to boot at all since then. What could the issue be? I live in South Africa and bought the phone through a private importer. So i have no warranty. Thoughts/suggestions?
If you manage to get into the bootloader you can try flashing raw firmware but it sounds like a problem with the power delivery system nothing can be done in that case except replacing the motherboard but in that case it's probably cheaper to get a new phone
@@TerminalHeatSink yeah it looks like im going to have to look into getting a new phone. No longer under warranty. Fortunately I have it insured so hopefully it will be covered. Anyways thanks so much for your fast reply and input man. Really appreciate it.
bro please help me, my ROG PHONE 2 is dead, only the usb qdloader 9008 is detected, how do I fix it?
follow the video you commented on rofl. you dont need to make an edl cable since its already in 9008 mode
does it work for android 10 too?' I can see mine in the device manager in 9008 mode but i can't flash the files cause it says "cannot receive hello packet"
Yep it will reflash the os so doesn't matter if you are on 9,10 or 11. Make sure to install the Qualcomm drivers
im still on the QPST part.. pls help
Yes I know read comment above
@@TerminalHeatSink did install the latest Qualcomm drivers, still the same... idk what to do, been 2 days since my phone went edl, then i found your video.. pls help
Try using a different USB cable, different USB port, different pc maybe. Use Windows 10 etc..
Bro pls tell me how the screen in on while dumbscrp mode