Erick Barrandey That would be the most important to get the shots video of the final project that comes out of the shop. 👍I'm shire the owners want to burn rubber out of the shop they are getting a whole diffrent car that rolled in.
Ur not talking trash KC! We all have seen it before at shows people bringing there stuff that they maxed out there pep boys credit cards on. Everything is looking great in the shop.
Well hey their Erick, man I love these videos. The daily progress videos have slowed down and that makes me sad, but then you completely redeem yourself with this one! Thanks for your what u do man
I've probably got 2 weeks of episodes that never got edited that i'm hoping to put together at some point and put them together though i'm not sure because they might not make sense at this point. I've been pulled off for special projects lately some of which you will see towards the end of the month. Thanks for your patience.
I love your videos keep up the great work. I have a 79 f150 and am thinking of the best route to go. It is a 4x4 but I want to go 2wd, I have a chance at a 429ci 4V hopefully everything works out
See y'all at the Car show this weekend. Hope y'all can bring a couple f100s.. dfw bump club will be out there. You should join on Facebook. Great group of helpful guys.
I totally agree with you KC. Car shows aren't the same anymore. Don't wanna go there and see 2018, ZO6,ZL1,Demon,Hellcat,GT500,etc. I wanna see muscle cars from the 50s,60s and early 70s. The 80s sucked for cars, unless it was a Buick GN, GNX or T-Type. Car shows these days are no different than walking the lots of a car dealership. Might have a set of wheels and a wrap, but otherwise you could walk any dealer lot, and see the same shit. I wanna see a badass restomod '66 Chevelle, with a motor and suspension that you'd find in a new car that can be bought at a dealer today. My dream car is a 1966 Chevelle with a LSA, out of 2013 ZL1 with a 4L80E backing it up. Put a nice suspension and brake kit on it, along with some 18s and a beefy tire. Drop a set of seats from a 2015 CTS-V and build a nice center console between the two. After that, put some classy, but high-tech gauges in the dash. Make sure the engine bay is nice and clean, with nothing but that bad ass supercharged LSA under the hood. Then on to the trunk. I'd like everything closed in and covered. Maybe but a sub and amp behind a panel dividing the rear seat and trunk. And finally have a discrete hatch that lifts up to reveal my AR15!
Yeah, you got to love the TV guide and Bondo special. Look good until you strip all the paint and filler. That's going to be a sick car when it's all back together!
He did 3 base coats. I tried to put a text box at the bottom for people to get that info. 5 coats on the clear. Just didn't want to be to repetitive on the footage.
HEY ERIC!!! LOL-Has KC ever thought about changing his business name- I know it's way too late to change the name in the branding game- but he def does more than most "Paint Shops" Should be KC'S Auto Paint & Restoration- JMO!
HEY FREDDY! I agree that sometimes it gets confusing that we are more than a paintshop but the year + wait we have to get on the list makes that ok for now lol.
There has been a lot of changes but I'll ask KC when he wants to share what the finalized plans are. I saw him going over them today so i'm curious as well.
I don't believe so. I think the next show is Back to the 50's in Minnesota and then we are doing Good Guys in Des Moines Iowa and I think I am flying out for that one.
I still think its gray. I blame the camera/ editing/ aliens/ and of course... Russians. Or the Germans if its a Porsche color. Chevelle looks very nice. As for the car shows... I agree, If I can go to a dealership and buy a new lifted truck, not what I want to see at a car show.
Hi KC.......thankyou another brilliant video, i only subscribed the other day so im catching up. Andrew UK...ps any sound advice on stone chips?? Its a problem over here. 😁😁😁😁
He'll paint any car for $39,95 right! That's Earl Scheib KC might have heard of him, I worked there that's where I learned to mix paint and coior match ( a totally lost art nowadays) and spray Metallics , back then you only had one shot of painting a car any runs, sags or flies in the booth would ruin a paint job, the Coatings industry has come a long way and there is a lot of new things. I'm not sure but auto painters might even be able to buy .life insurance.
Best way to inquire is to send an email to kcspaintshop@gmail.com you can send in any photos along with any information and what your interested in doing to it and Bosslady or KC will let you know!
Too much yappin and not enough squirtn. And chopping and gangfucking those works of art cars putting all of that bullshit on them makes me nausious.🤢 Maybe a Maverick or a Vega, but why on earth would anyone hack up a 66 Chevelle??? You've got to be out of your gourd to do that! This is why I hate tv. Don't get me wrong, I'm happy for your success, but these shows really inspire to do some terrible desecration to some sacred cars just for good tv ratings. I can't watch any more of this shit. Bye.
Too much talk.where’s the wow factor,full Custom paint killer stuff.if I wanted to watch bs just visit a penny any body shop.get it together or get off U 2
Can't wait to see it put together all creased up and button up.
Me too. I just hope to get some good stuff before the clients runs off with it. I know he is super excited to drive it.
Erick Barrandey That would be the most important to get the shots video of the final project that comes out of the shop. 👍I'm shire the owners want to burn rubber out of the shop they are getting a whole diffrent car that rolled in.
Also we love the great honesty and flow of your videos, non scripted is a breath of fresh air 😁
The chevelle looks amazing! Great job Bruce!!
Dang, yall make hard work look like fun. You guys are the greatest.
👍🏾 car looks bad ass can't wait to see it complete
This guy needs his own show. Quality product from him. He talks well to the camera.
As always Erick, lovin your updates.
Thank you Stuart, we always appreciate the support!
can't wait for the Chevelle to be finished it should be awesome
Ur not talking trash KC! We all have seen it before at shows people bringing there stuff that they maxed out there pep boys credit cards on. Everything is looking great in the shop.
love the falcon
Well hey their Erick, man I love these videos. The daily progress videos have slowed down and that makes me sad, but then you completely redeem yourself with this one! Thanks for your what u do man
I've probably got 2 weeks of episodes that never got edited that i'm hoping to put together at some point and put them together though i'm not sure because they might not make sense at this point. I've been pulled off for special projects lately some of which you will see towards the end of the month. Thanks for your patience.
Erick Barrandey you could title it as clips that didn't make it in, through some blooper reels in there
That will probably be what happens.
Killer work as always KC
Give Bruce some credit. He put a lot of body work into the Chevelle. Thanks for the post all.
Good stuff Erick...
As always, thank you for supporting us!
Nice to see a shop video, had to watch it twice though was looking for the famous black dot. lmao
I cleaned the lens once I got back to my cleaning supplies.
Hello Discovery, please give KC his own show.
greetings Kc mathius, you are the best, we follow you from Durango Mexico friend
Great vid Eric.
Thanks.
I love your videos keep up the great work. I have a 79 f150 and am thinking of the best route to go. It is a 4x4 but I want to go 2wd, I have a chance at a 429ci 4V hopefully everything works out
See y'all at the Car show this weekend. Hope y'all can bring a couple f100s.. dfw bump club will be out there. You should join on Facebook. Great group of helpful guys.
O:20 I fell in love with that machine
Hell Yea. My pops has a 67 with a 396.
fans from Russia watch you, good luck
Kickn ass KC 🤠🔫
I totally agree with you KC. Car shows aren't the same anymore. Don't wanna go there and see 2018, ZO6,ZL1,Demon,Hellcat,GT500,etc. I wanna see muscle cars from the 50s,60s and early 70s. The 80s sucked for cars, unless it was a Buick GN, GNX or T-Type. Car shows these days are no different than walking the lots of a car dealership. Might have a set of wheels and a wrap, but otherwise you could walk any dealer lot, and see the same shit. I wanna see a badass restomod '66 Chevelle, with a motor and suspension that you'd find in a new car that can be bought at a dealer today. My dream car is a 1966 Chevelle with a LSA, out of 2013 ZL1 with a 4L80E backing it up. Put a nice suspension and brake kit on it, along with some 18s and a beefy tire. Drop a set of seats from a 2015 CTS-V and build a nice center console between the two. After that, put some classy, but high-tech gauges in the dash. Make sure the engine bay is nice and clean, with nothing but that bad ass supercharged LSA under the hood. Then on to the trunk. I'd like everything closed in and covered. Maybe but a sub and amp behind a panel dividing the rear seat and trunk. And finally have a discrete hatch that lifts up to reveal my AR15!
Yeah, you got to love the TV guide and Bondo special. Look good until you strip all the paint and filler. That's going to be a sick car when it's all back together!
Nice paint job and nice shop.. X5 Clear coat really makes that depth, I guess im sayin it right..
JackMeHoff Gud Bruce deserves the credit for all the prep
That Chevelle is gonna be bad ass.
I agree, newer automobiles / cars and trucks need to have their own show or a separate area away from the older ones, cut off at 10 years old or less.
Y’all need to hurry up and make it to a show in Nashville
Nice
Dam right KC.
Old school is cool!!
Hell Yes !!!!!!!
O cara q mais manja na pintura...
I need to take some metal shaping classes from Austin!!!
Good Luck! I'd like some as well.
show!!!!!
very good
you have to fill up the coil with energy,just be shure to have the right energy to fill it with
"If the gap's a quarter inch, I'm okay with it" 😂👍🏻
Gotta love Shopdad.
Question do you shoot sealer,base,and clear all in same day or do you have to wait between coats?
From my observation, yes everything gets done all in the same day as far as time between coats it varies. I'll ask KC his round about times.
That booth is the shit man
When it comes to bodywork, I generally strip the car myself
Then take that shit to a professional
Let them work their magic
Coincidentally
Shop dad seems like one cool ole dude
Us old farts are entertaining aren't we?
Do you ever have trouble trapping solvents putting that many coats of clear on at one time?
What color red is that truck in the shop? Great looking color. Thanks
Can we see the wheel and tire combination for KC's F-100
Well I would show you but it looks like the setup is changing and you will find out soon what will be going on at the end of the month!
Erik, what brand is that black lift KC's Frankenstein f100 is on, the uprights look tiny...? thx
Not sure I'll have a look on Monday. Its a portable lift we use because it easy rolls away into storage when we need it and we can place it anywhere.
Bruce Wayne are you happy with the way all your lines turned out? On camera it looks amazing man
What kind of high build does KC use?
Top 👏👏
KC i need a job. I have over 20 years experience in detailing..😂..🙏
Did that base coat cover in 1 coat?
He did 3 base coats. I tried to put a text box at the bottom for people to get that info. 5 coats on the clear. Just didn't want to be to repetitive on the footage.
HEY ERIC!!! LOL-Has KC ever thought about changing his business name- I know it's way too late to change the name in the branding game- but he def does more than most "Paint Shops" Should be KC'S Auto Paint & Restoration- JMO!
HEY FREDDY! I agree that sometimes it gets confusing that we are more than a paintshop but the year + wait we have to get on the list makes that ok for now lol.
Is that RM OnyxHD? What kinda clear did you use on the Chevelle? Great work as always!
In order to make crap look really good you guys need the Canon 80D.
I agree on the car show comment...
Why has KC went from Valspar to BASF , personal quality do you think it is the best?
Whats the latest on the new shop?
There has been a lot of changes but I'll ask KC when he wants to share what the finalized plans are. I saw him going over them today so i'm curious as well.
66 is Looks good. Are you guys coming to Indianapolis Erick?
I don't believe so. I think the next show is Back to the 50's in Minnesota and then we are doing Good Guys in Des Moines Iowa and I think I am flying out for that one.
Erick Barrandey aww man 😔
What ever happened to the Fox body?
Still sitting unfinished in storage. Not sure why but usually when stuff is in storage it's usually on the clients end.
That's the slowest 4 post hoist I've ever seen.
When can I buy some KC Paint Shop knee high socks?
that chevelle looks bithin with those wheels. so, is it scottish or irish blood that gives kc that pasty skin?
I still think its gray. I blame the camera/ editing/ aliens/ and of course... Russians. Or the Germans if its a Porsche color. Chevelle looks very nice. As for the car shows... I agree, If I can go to a dealership and buy a new lifted truck, not what I want to see at a car show.
Wholly cow that 4 post lift is slow
Purdy
Basf 👍
Hi KC.......thankyou another brilliant video, i only subscribed the other day so im catching up.
Andrew UK...ps any sound advice on stone chips?? Its a problem over here.
😁😁😁😁
Keenan, I dunno I'm not a mechanic. LMAO
Wouldn’t a graphite blue be a gray/blue
BINGO. I didn't think about it til it was too late to say something but you sir are correct.
Wheels, tires and lift isn't a show truck that's a daily driver
Coolness ! What happen with your brother Mikey ? Glad you got away from those damn choppers.
Hey can I get an online quote for my Geo Metro? Body is rust free and it runs like a top. 😜
Who needs 8 cylinders when you have 3? hahaha
He'll paint any car for $39,95 right! That's Earl Scheib KC might have heard of him, I worked there that's where I learned to mix paint and coior match ( a totally lost art nowadays) and spray Metallics , back then you only had one shot of painting a car any runs, sags or flies in the booth would ruin a paint job, the Coatings industry has come a long way and there is a lot of new things. I'm not sure but auto painters might even be able to buy .life insurance.
I wanted to take my bronco to you
How’s it possible
Best way to inquire is to send an email to kcspaintshop@gmail.com you can send in any photos along with any information and what your interested in doing to it and Bosslady or KC will let you know!
Can y'all just have a Tv show yet. Keep up the good work
I got a 97 gmc 4x4 that needs work
roger wixom make it your weekend project and get to work 👌🏻
spray booth cost 150 k ????
BUILD A KICK ASS SEMI
delron.. 9000? lol...
Who the fuck dislike the video????
E-fucking-xactly about brand new cars with just rims entering car shows.
What's with the gay socks?
Too much talking - not enough working...
Too much yappin and not enough squirtn.
And chopping and gangfucking those works of art cars putting all of that bullshit on them makes me nausious.🤢
Maybe a Maverick or a Vega, but why on earth would anyone hack up a 66 Chevelle???
You've got to be out of your gourd to do that!
This is why I hate tv.
Don't get me wrong, I'm happy for your success, but these shows really inspire to do some terrible desecration to some sacred cars just for good tv ratings.
I can't watch any more of this shit.
Bye.
Too much talk.where’s the wow factor,full Custom paint killer stuff.if I wanted to watch bs just visit a penny any body shop.get it together or get off U 2