Hello friend. I need to connect 2 wan to 1 lan… 1 wan(wan1) set how primary and the other wan (wan 2) in case of the first wan fail (backup) this configuration could help me?? I would appreciate your answer thank you
Where to get WAN Ip ? can we assign any WAN ip of WAN ip? I have two connection wan connections from ISP. both connections has its own routers, I get INTERNET from each connection through router LAN port, I can assign the static IP to LAN port in ISP's provided router. Now will WAP ip be same in microTick Router OS , e.g if I assign WAN1 wire on eth1, then will ip of eth1 will be same as of defined in static LAN ip on ISP's provided router?
Thanks for your video. But this is not pure load balancing, User should have access to both WAN1 & WAN2 at a time. I want to do pure load balancing, it means, WAN1 has 10Mbps and WAN2 has 15Mbps, When Group-A user will see, WAN1 usage is 9.5-10Mbps, it will heat to WAN2 automatically. How can I do that?
Great to watch to your video.... Would you please upload video of Mikrotik Fail Over over 2 Gatewas (2 Wan) I really so excited to watch your this hard work
Thanks great video. Your looks like mine almost I do not know what is what anymore haha, but that's mainly because I study penatration and cyber security.
Hello my friend I followed all in this video, I must say this is working, but the only problem is that I unable to ping other local lan interfaces from Group A or B. Any idea how to solve this? Thank you!
Thanks for your video, is great!!!! I have a problem, please help me: I have one nvr belonging to group a and one belonging to group b, how can I open the doors for each nvr on the mikrotik rb ??? my wan1 ip address is 192.168.0.219/24; my wan2 ip is 192.168.1.230/24. My internal lan(bridge) is 10.0.0.0/24 all interfaces(except for eth1-wan1 and eth2-wan2) are brigged and the first nvr ip is 10.0.0.133 port 34567;the second nvr ip is 10.0.0.77 port 34568
i have 100mb and another 50mb plan when i do load balancing my client cant use proper internet always internet slow when i closed one wan port then internet is very fast how i can solve this problem
Sir i have two public ip - 202.166.198.32 and 202.166.198.33 have same gatway - 202.166.198.1 so i want configure 192.168.0.1 to 192.168.0.100 for wan ip 202.166.198.32 and 192.168.0.101 to 192.168.0.254 for wan ip 202.166.198.33 in one same lan what is the configuration in Mircotik.
video is good and helpful..but why you are bieng soo fast ???? its even problematic with pause button...you want to talk to viewers or you wanna tak to yourself
helpful video thx kindly sir tell me which computer (P.C) is best for mikrotik v5 or v6 installation and kindly mention motherboard name i want to install on (P.C) thx
System Zone thx for the reply but I have an error during install e.g 1 > packages not found 2 > CD Rom not found etc even I have CD or DVD Rom and I have Mikrotik CD with complete packages when I try on virtual box with this CD then boots like charm but when I try to boot on system then following errors I mentioned above I face so if you have any idea of this problem then kindly tell me i'll be thankful to you .
Bro, first try according to this article and then let me know. systemzone.net/install-mikrotik-os-on-pc. I think something problem with your MikroTik CD.
System Zone bro now I just try to install Mikrotik with CD but now I am getting this error fatal error no hard drives found press enter to restart . system information optiplex 755 Intel core 2cpu 2.13 ghz and 40 gb sata drive 1gb ram .
System Zone I have two lte router... I mean 2 lte 4g connection... So which load balance or dual wan router should I buy.. I play games alot n downloader also.... Do I need load balance or what
hello sir very fantastic video but im in saudi araba here its given PPPoE user name and password how can i connect and i want to marge the 2 wan (ex: wan1 is 100mbps and wan2 is 100mbps then i need output 200mbps though LAN) its posible
let's put aside the fact that you are using private address on a public interface, for a while, and comment just a "Load Balancing" part ... THIS IS NOT A LOAD BALANCING ! This is just a router with two gateways. You cannot guarantee that half of your traffic will go through one and the other half through the other gateway - ant that is what the BALANCE means... so, nice try but no cigar...
Brother everyone needs voice only videos works for professionals and professionals already knows this work ... You should add Voice aswell thanks ... I'll dislike your video
Thank you. What will happen if ISP A fails? Group A has no internet?
Tanks. this step by step video is very useful
is this also acts as a fail over?
Without dhcp two wan and two lan works?
Hello friend. I need to connect 2 wan to 1 lan… 1 wan(wan1) set how primary and the other wan (wan 2) in case of the first wan fail (backup) this configuration could help me??
I would appreciate your answer thank you
this is basically two routers in one correct? I can make a seperate LAN segment and use it specifically with the wan2 and it'd funcion as two routers
You can find more load balancing option following this link: systemzone.net/category/computer-networking/mikrotik-router/load-balancing/
Good Tuto. Then, if i want to use the 2 ISPs connections without LAN group ? Please help
Can all the network share 2 ISPs?
Thanks Sir, it was very helpful.
If ISP WAN1 is down, how are users in GroupA?
Where to get WAN Ip ? can we assign any WAN ip of WAN ip? I have two connection wan connections from ISP. both connections has its own routers, I get INTERNET from each connection through router LAN port, I can assign the static IP to LAN port in ISP's provided router. Now will WAP ip be same in microTick Router OS , e.g if I assign WAN1 wire on eth1, then will ip of eth1 will be same as of defined in static LAN ip on ISP's provided router?
Thanks for your video. But this is not pure load balancing, User should have access to both WAN1 & WAN2 at a time.
I want to do pure load balancing, it means, WAN1 has 10Mbps and WAN2 has 15Mbps, When Group-A user will see, WAN1 usage is 9.5-10Mbps, it will heat to WAN2 automatically. How can I do that?
follow this video th-cam.com/video/MGs2qB9vVfQ/w-d-xo.html. Hope you will get solution.
Hi sir I did lod balancing but I'm not getting double speed
While running the DHCP server on the Mikrotik, does this system works while down one WAN automatically shifted into another active WAN?
yes, you must add option: check-gateway=ping
for example,
/ip route
add distance=1 gateway=Host1 routing-mark=ISP1 check-gateway=ping
add distance=2 gateway=Host2 routing-mark=ISP1 check-gateway=ping
/ip route
add distance=1 gateway=Host2 routing-mark=ISP2 check-gateway=ping
add distance=2 gateway=Host1 routing-mark=ISP2 check-gateway=ping
estimated as I do to have two active wan at the same time is able to do vpn for both at the same time and ternet two input lines for rules of input
Follow this article: systemzone.net/mikrotik-dual-wan-load-balancing-with-failover-using-pcc . Hope you will get solution.
ok
I am facing a problem last couple of days. I can not get my local gateway ping from my laptop or other computer. Please give me a solution.
Great to watch to your video....
Would you please upload video of Mikrotik Fail Over over 2 Gatewas (2 Wan)
I really so excited to watch your this hard work
Sir this is very good video Thanx
Sir can we merge both ISP speed ?
Yes we can, you can ecmp load blancing for this. You will find how to do ecmp in my website or video in System Zone channel.
Thanks great video. Your looks like mine almost I do not know what is what anymore haha, but that's mainly because I study penatration and cyber security.
not really full load balancing because its base ip.. what if there are only one user.. it always use 1 WAN only..
From the beginning, I become a routine visitor. Hope this time you will not make me upset.
Hope any video will give you some information.
Hello my friend I followed all in this video, I must say this is working, but the only problem is that I unable to ping other local lan interfaces from Group A or B. Any idea how to solve this? Thank you!
Thanks for your video, is great!!!!
I have a problem, please help me: I have one nvr belonging to group a and one belonging to group b, how can I open the doors for each nvr on the mikrotik rb ???
my wan1 ip address is 192.168.0.219/24; my wan2 ip is 192.168.1.230/24. My internal lan(bridge) is 10.0.0.0/24 all interfaces(except for eth1-wan1 and eth2-wan2) are brigged and the first nvr ip is 10.0.0.133 port 34567;the second nvr ip is 10.0.0.77 port 34568
hello sir, i have three internet company service, i can use this router to balance the three service??
No you can't, it has to be same ISP
I would like to learn the basics for the configuration of the mikrotik ap, swicth and router I can start not what video.
thank you for sharing......
i have 100mb and another 50mb plan when i do load balancing my client cant use proper internet always internet slow when i closed one wan port then internet is very fast how i can solve this problem
Sir i have two public ip - 202.166.198.32 and 202.166.198.33 have same gatway - 202.166.198.1 so i want configure 192.168.0.1 to 192.168.0.100 for wan ip 202.166.198.32 and 192.168.0.101 to 192.168.0.254 for wan ip 202.166.198.33 in one same lan what is the configuration in Mircotik.
Want to try this once?
But how do ip the customer?
very nice video sir
good day sir, how to use simple queues in your configuration? I would like to use wan1 for gaming and wan2 for browsing
Simple queue works on LAN IP. So, put simple queue as usual.
Why when testing wan2 need to change IP ?
I want to config load balancing when wan1 lose connection . client can auto access with Wan1 , Ok or not?
For load balancing with fail over, you can study ECMP load balancing from this article systemzone.net/mikrotik-ecmp-load-balancing-and-link-redundancy
Easiest way is to setup WAN2 on another interface, and use route 1 mark for primary and route 2 mark for failover.
ami 2 isp r internet and youtube eksathe use korte parbo ekta mikrotik a
Ha, parben.
How to cenect tp link load banlacer with mikro tik i have 2 isp
With this process LAN Group A & Group B can't communicate with each others. How to solve this?
Follow this article, you will get solution systemzone.net/mikrotik-load-balancing-and-link-redundancy-with-pbr
video is good and helpful..but why you are bieng soo fast ???? its even problematic with pause button...you want to talk to viewers or you wanna tak to yourself
Allah razı olsun
not clear cant see what your doing
Hi there, please make a tutorial video about how we can setup and configure vlan on microtik wireless. Thnx
Tq sir very useful
same script with sas3 available ha
helpful video thx kindly sir tell me which computer (P.C) is best for mikrotik v5 or v6 installation and kindly mention motherboard name i want to install on (P.C) thx
You can use any motherboard but RAM > 1GB and multi core processor will be better.
System Zone thx for the reply but I have an error during install e.g 1 > packages not found 2 > CD Rom not found etc even I have CD or DVD Rom and I have Mikrotik CD with complete packages when I try on virtual box with this CD then boots like charm but when I try to boot on system then following errors I mentioned above I face so if you have any idea of this problem then kindly tell me i'll be thankful to you .
Bro, first try according to this article and then let me know. systemzone.net/install-mikrotik-os-on-pc. I think something problem with your MikroTik CD.
System Zone bro now I just try to install Mikrotik with CD but now I am getting this error fatal error no hard drives found press enter to restart . system information optiplex 755 Intel core 2cpu 2.13 ghz and 40 gb sata drive 1gb ram .
I have tried with different CD of Mikrotik still same error
how to configure cisco switch for normal use
By default cisco switch is well configured. So, just plug your switch and connect your devices and it will work fine.
thanks and how to find loop on network
it's just a load balancing not a Load Balancing with fail-over...
For fail-over load balancing, follow this article systemzone.net/mikrotik-ecmp-load-balancing-and-link-redundancy/
System Zone I have two lte router... I mean 2 lte 4g connection... So which load balance or dual wan router should I buy.. I play games alot n downloader also.... Do I need load balance or what
.
BHAI 3 WAN KASI HO GEEE
i nead a clear config
excellent!!!
That's not real load balancing. It should be 2 or more ISPs and clients from all LAN(s) go to internet via the ISP with less loading.
hello sir
very fantastic video but im in saudi araba here its given PPPoE user name and password how can i connect and i want to marge the 2 wan (ex: wan1 is 100mbps and wan2 is 100mbps then i need output 200mbps though LAN) its posible
Good
its not work with fial over
It is just load balancing but not link redundancy. For link redundancy follow: th-cam.com/video/MGs2qB9vVfQ/w-d-xo.html
sey vai
let's put aside the fact that you are using private address on a public interface, for a while, and comment just a "Load Balancing" part ...
THIS IS NOT A LOAD BALANCING ! This is just a router with two gateways. You cannot guarantee that half of your traffic will go through one and the other half through the other gateway - ant that is what the BALANCE means... so, nice try but no cigar...
Kindly give me contact no
Brother everyone needs voice only videos works for professionals and professionals already knows this work ... You should add Voice aswell thanks ... I'll dislike your video