Hello! Brilliant tutorial, thanks. Please guide me through making "WAN1" primary and "WAN2" secondary. In my setup, WAN1 is unmetered, and WAN2 is a metered connection which I am using for failover. I want to modify this configuration to only use WAN2 when WAN1 is down. Thank you.
I did this confing and it works well. I can only remote access the MikroTik on WAN1, not on WAN2. I mean, it is not possible to remotly access the MikroTik on WAN2 with its Public IP address, unless I disable WAN1. In my config, all WAN have Public IP addresses. How can I remotly access the MikroTik on WAN2 Public IP address without disable WAN1 ?
Hi, thanks for this perfect movie, but i have problem how you forward port ? I have webserver behind this multiwan, do you know how allow my 80 443 TCP port ? Thanks
How can i have the two ISP active at the same time? I had two different ISP, each one with public IP and i have a web page that i wan't to be reachable from both IPs at the same time. The problem is that i can't get the two links active at the same time, even with Load Balance, the traffic get divided between the two links, but my domain that i pointed to the two IPs only reache by the active link at the time.
tanong lng sir pano yung same ang ISP na x.x.1.1? pag nag add ako sa Address list same silang x.x.1.0/24 hnd pwedeng same ang name nila pano yung pag gawa sa mangle accept need ko b gumawa ng dalawang accept rules ? salamat sir.
Maraming Salamat po sa tutorial.... 100% working po. Ask ko lang po kung bakit kaya hindi nagmerge ang Upload? Ok po sya sa Download speed pero sa upload po hindi nagmerge. Salamat po
Sir working po. Pero may idea ka kung pano ma priority si WAN1? Minsan kase si WAN 2 yung nauuna then mataas ang speed. Yung WAN1 ko kase PLDT fiber then yung WAN2 naka postpaid lang. Need ko po ma priority lang si WAN1
boss gagana po ba ito sa parehong ISP na pldt fiber??papano kaya po iyun eh parehas naman po ip nila na 192.168.1.1??maraming salamat po..ganda ng tuts nyo dito sa vlog nyo..kaso naguguluhan ako kung gagana ba xa if ever gawin ko po ito sa parehong ISP at parehong IP addresses..
@@wifilabxyz the only difference is that i've set bridge for ports 3 4 5 so i can use them all, just checked, if i set only one port for lan, speed is okay... Is there any way to use rest of ports?
boss salamat sa tutorial noon tingin ko ang hirap ng basic config ng mt ngayon parang gusto kunang ako mismo mag config.salute
Excelent tutorial. Well done !!!
Hello!
Brilliant tutorial, thanks.
Please guide me through making "WAN1" primary and "WAN2" secondary.
In my setup, WAN1 is unmetered, and WAN2 is a metered connection which I am using for failover.
I want to modify this configuration to only use WAN2 when WAN1 is down.
Thank you.
Verry good Job
Tanks
thanks you bro it's a perfect job
I did this confing and it works well. I can only remote access the MikroTik on WAN1, not on WAN2.
I mean, it is not possible to remotly access the MikroTik on WAN2 with its Public IP address, unless I disable WAN1. In my config, all WAN have Public IP addresses.
How can I remotly access the MikroTik on WAN2 Public IP address without disable WAN1 ?
I have a question, if sending is faster, so by uploading one large file to google drive we will do it faster?
This Woww.
Thank you l love this one it is very effective
excellent
Hi, thanks for this perfect movie, but i have problem how you forward port ?
I have webserver behind this multiwan, do you know how allow my 80 443 TCP port ? Thanks
How can i have the two ISP active at the same time? I had two different ISP, each one with public IP and i have a web page that i wan't to be reachable from both IPs at the same time. The problem is that i can't get the two links active at the same time, even with Load Balance, the traffic get divided between the two links, but my domain that i pointed to the two IPs only reache by the active link at the time.
How i can make port forwarding for both wan?
tanong lng sir pano yung same ang ISP na x.x.1.1?
pag nag add ako sa Address list same silang x.x.1.0/24 hnd pwedeng same ang name nila pano
yung pag gawa sa mangle accept need ko b gumawa ng dalawang accept rules ?
salamat sir.
sir can we speed double on RB75GR3 with same ISP 200mbps + 200MBPS= 400mbps ?
Maraming Salamat po sa tutorial.... 100% working po. Ask ko lang po kung bakit kaya hindi nagmerge ang Upload? Ok po sya sa Download speed pero sa upload po hindi nagmerge. Salamat po
Sir working po. Pero may idea ka kung pano ma priority si WAN1? Minsan kase si WAN 2 yung nauuna then mataas ang speed. Yung WAN1 ko kase PLDT fiber then yung WAN2 naka postpaid lang. Need ko po ma priority lang si WAN1
Does it works to SSL HTTPS?
hello! hoping there is a configuration on this on version 7
bihira ang ganitong nagsi-share nang walang kapalit :) salamat po
watch out for the dhcp setting, it is easier...
@@wifilabxyz sir thanks for the tutorial, but im confused po kc di po nag set ng dhcp clients para ISPs, just asking lang po?
request untuk forwading ip publik ke ether1. jika ether1 menggunakan astinet dan ether2 menggunakan indihome.. terima kasih
Sir Static + DHCP po pwede ba?
Sir paano ang quee nito ? naka global ba ang parent nito?
boss gagana po ba ito sa parehong ISP na pldt fiber??papano kaya po iyun eh parehas naman po ip nila na 192.168.1.1??maraming salamat po..ganda ng tuts nyo dito sa vlog nyo..kaso naguguluhan ako kung gagana ba xa if ever gawin ko po ito sa parehong ISP at parehong IP addresses..
try nyo to sir, parehong gateway 192.168.1.1
/ip route
add dst-address=0.0.0.0/0 gateway=192.168.1.1%ether1-WAN1 routing-mark=TO_WAN1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.1.1%ether2-WAN2 routing-mark=TO_WAN2 check-gateway=ping
Works fine except maximum speed is 100Mbit/s while both internet connections is 1Gbps... Is there any way to fix that?
upgrade your router to a high end model. i believe they have 10gbps CRS available.
@@wifilabxyz I have mikrotik hex, if I use 1wan, speed is ~960mbps, with your config only 100mbps
hmm seems like a port issue coz u are getting 100 exactly.
@@wifilabxyz the only difference is that i've set bridge for ports 3 4 5 so i can use them all, just checked, if i set only one port for lan, speed is okay... Is there any way to use rest of ports?
i dont think so with bridging ports together, throughput will become less if u do that. the only option u need is to add a switch.
PLEASE ADVISE !!!
Boss kahit ba isang ISP pero mag Dual Wan okay lang ba?
pwde lang sir.
Wow Thanks how to make wan1 primary wan 2 secondary
Wan1 staticip and wan2 ppoe load balancing video
soon... thanks!
sir pd lagyan ng queue to?
i think pwde. matrabaho lang.
pwede po ba to sa computer shop ?
pwde din po...
sir bakit sakin unreachable yung lahat na gawin kong routes?
1.1 at 2.1 din ba ip ng dalawa mong router?
@@wifilabxyz yes po. yun po sinet ko sir
try mo na lang DHCP.
Sir please Load Balancing with PPPoE Configuration
i already have that... check my past uploads.
@@wifilabxyz share link
first