Mikrotik ROS Guest Network using VLANs
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- Link to written guide: thesebytes.net/mikrotik-route...
00:00 Intro
0:55 Internal Network Setup
3:38 Guest VLAN Creation
4:41 Guest Network Setup
6:21 Wireless/Guest Wireless
13:07 Bridge Config
17:30 VLAN Segregation
21:04 Adding Ethernet Ports To The Guest Network
22:57 Block Input From Guest Network
23:53 Blocking MAC/Layer 2 Input - วิทยาศาสตร์และเทคโนโลยี
Great video, really hoping to see you keep at it and create more content on MikroTik!
Thank so much for the feedback!
The Network Berg thanks for sharing this video.
@@TheseBytes I will wait more video from you
Huzzit brus - I'm here thanks to The Network Berg posting this on his Discord channel - Great Vid! So I subscribed :)
@@snowballeffects Awesome to have you subbed!
Thank you, this is the video I have been looking for! As a newb, setting up an isolated IOT vlan on my Mikrotik has been super confusing. Hoping you have a video on Mikrotik firewalls for dummies like me lol.
In the pipeline for sure!
Courtesy of TNB. 🖐️
Duuude thank you so much for posting this video i been struggling for the past 2 days to setup a guest wifi network on 5 mikrotik access points using a vlan and this video really helped me allot
This video was just what I needed to see! Very clear. Many thanks :)
Thank you! Glad I could help.
Love the video. You explain howto setup very good, it is easy to follow. 👌
skorzystałem, działa, dziękuje
Awesome video, thank you.
Thank you for sharing this tutorial. Could you please show us, how to configure these under RouterOS 7.13? As we all know, wireless conception and menu are changed. Thanks.
Nice. Keep going.
Great job
Thank you!
NetworkBerg got competition :P
I purchase a RBD53iG-5HacD2HnD and I still have problems to create SSIDs with different Vlans, I'm able to connect I get dhcp but no internet, I checked the Firewall and the masquerade is created, I made the same routes as the video said and still not internet also even I'm connected to the vlan with the ip range I assigned I don't have access to the mikrotik or able to ping it. It's version 7.15.2 Any recommendation or video I can follow? Thank you. If I use the one that comes by default with vlan1 everything works.
Great video! Just curious, on Winbox 7.7 I can't see the "Virtual" button on "Wireless tables", I see only a "plus" icon (I'm using a hap ax2).
So I cam add a new interfase with "master" on another wifi (I suppose is the same as virtual) but there's no VLAN mode or VLAN ID on any of the tabs.
Any ideas on how to achieve? maybe this was removed on newer versions?
Thank you!
I read at some locations that one should avoid more than one bridge per device for performance reasons. Is that true?
Woudld be a 1-bridge-solution possible by binding virtual interfaces to the wlan-interfaces themselves and add those to the bridge?
Good evening Sir, thanks for your time educating us. Pls, kindly help...
I have a unified AP Pro that want to use and extend internet service from groundfloor to 4th floor.
pls how do i go about it... I have already run cat6 to 4th floor. Thank you.
Nice video, just out of curiosity , why did you untag VLAN 10 on the Guest WLAN interface if you are tagging VLAN 10 for that interface and tagging it in the bridge VLAN filtering?
Hey Jarryd, you are correct! Setting the pvid is actually an unnecessary step as it's being ignored due to the fact that the frame type was set to "admit only vlan tagged". I also must have made a mistake in my editing and forgot to show me enabling ingress filtering on the port 🙈 I will add a little note there on the video.
@@TheseBytes Hi please, is that problem already solved in video? Or is there any other neccessary step to setup it right? Thank you
@@jvplayground its not a problem in the sense that it will effect the config, rather that setting the PVID is bypassed by the introduction of frame type filtering.
@@TheseBytes Ah, OK,. Please, can I ask you - I have router set up with Quick set wizard as HomeAP dual with bridges all LAN ports and NAT... I made everything as you in video and Guest Wifi worked perfect, when i tried to add one LAN port to same VLAN (as guest wifi), it didnt worked - connected devices could receive IP address from DHCP... Please, is there any difference, when I used that Quickset config? Thank you very much
@@jvplayground I don't really know regarding the quickset wizard. I usually don't recommend using it. In order to add a port to a specific VLAN you'd need to set the ports PVID to the vlan ID, then on the bridge vlan table set that port as the untagged interface and the bridge interface as the tagged. If you've already done this for the wireless then just go onto the same vlan table entry for the corresponding vlan ID and add the ether port as an untagged interface.
21 minutes in, this works fine for dhcp but the ether ports have no internet?