BMW MINI Brake Master Cylinder Replacement !!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ก.ค. 2024
  • In this comprehensive tutorial, learn how to replace the brake master cylinder on your BMW Mini when experiencing a sinking brake pedal. Whether you're a DIY enthusiast or a professional mechanic, this step-by-step guide will walk you through the process, ensuring safe and reliable braking performance. Say goodbye to that unnerving feeling of a sinking brake pedal and regain confidence on the road. Watch now and empower yourself with the knowledge to tackle this crucial repair!Don't forget to like, comment, and subscribe for more automotive repair tutorials!
    #BMW #Mini #BrakeMasterCylinder
    #DIY #BrakeRepair #CarMaintenance #Mechanic #AutoRepair #BrakePedal #Tutorial #HowTo #CarFix #SafetyFirst #RoadSafety #EmpowerYourself
  • ยานยนต์และพาหนะ

ความคิดเห็น • 10

  • @vladtymchak2021
    @vladtymchak2021 หลายเดือนก่อน +1

    Why you replaced it?

    • @MrAutoFixer
      @MrAutoFixer  หลายเดือนก่อน +1

      Because it had a sinking pedal, which gives poor brakes and is dangerous to drive with 👍

    • @vladtymchak2021
      @vladtymchak2021 หลายเดือนก่อน +1

      @@MrAutoFixer My calipers won’t release, may it be the master cylinder? I found some leaks under reservoir but its strange, rear wheels are sticking a lot, I already rebuilt a caliper without any results.

    • @MrAutoFixer
      @MrAutoFixer  หลายเดือนก่อน +1

      If all the calipers are stuck on them it’s more likely to be the ABS pump faulting and not letting the pressure off. Most common fault would be the calipers being siezed or the sliders.

    • @MrAutoFixer
      @MrAutoFixer  หลายเดือนก่อน

      @@vladtymchak2021 if it’s the rears it will be the handbrake cables and a good test it to pop the cables out of their holders underneath and wiggle them to free off the cable and the caliper will release and when you put the handbrake cable back in its holders the caliper will go tight again. Seen it happen a lot!

    • @vladtymchak2021
      @vladtymchak2021 หลายเดือนก่อน

      @@MrAutoFixer I changed all 4 rotors and pads, bleed well, all calipers are working well even with hand brake screw lose (rear), double checked holders, the pressure in the brake system won’t release for some reason, it may be abs? Actually calipers won’t go back to optimal position to freely turning the wheel, it’s like master cylinder sip air somewhere without taking pushed fluid back.