Gotta love the dewalt multi but the rigid has had me intrigued for awhile now bc of the octane system. If my dealt ever does I may go rigid. We all know that my absolute fav “Red” brand has let me down twice with their multi tools. The M12 & M18 both suck IMHO
I need to mention this. First off, I have both. I feel the Ridgid has the best blade exchange on the market. There is absolutely no blade that the Ridgid won’t take AND there is a magnet that holds the blade to the tool while exchanging. Also, you are not able to put a dremel blade on the DeWalt without cutting the Dremel blade where it is closed at the end. So you were just running the DeWalt with a Dremel blade that wasn’t completely on. I’m surprised nobody else noticed this. This is why you couldn’t put the blade on correctly when you tried. If you used a blade that fit, the DeWalt would’ve been a lot quieter. Another thing, it is very important that you let the Oscillating Tool do the work for you. Anything more than that, you’re just prematurely burning the blade out and the tool. So again, Dremel blades do NOT fit on the DeWalt without cutting out the opening with a grinder of cutoff tool. Please understand that I’m not trying to send a dig your way, I’m just trying to show you the correct way to do so. Any blade is only as good as the user. It can last 5 minutes or 5 months. Literally. I hope you get to read this and give the comparison another shot.
I do not know what video you DeWalt fans watched but goodness the Ridgid crushed the DeWalt. Crushed it in performance. Crushed it. The only feature i liked about DeWalt was the quick release. What we did not see was how to add anything other than a blade. RIDGID crushed this comparison. Great video, thanks.
Yeah, this M18 multi tool, ive read, is lackluster so i purchased the M12 version as not to change battery platforms. Im hoping Milwaukee fixes it this NPS19.
I'm a milwaukee guy but I did purchase the dewalt after getting the opportunity to use one on the job last week. I was hesitant to get the dewalt since i am set up with the milwaukee system but after using the tool on the job and seeing so many reviews on YT showing how superior it is to the milwaukee I took advantage of the starter kit deal at home depot where you buy 2 5ah batteries, the charger and a tool bag for 199.00 and you get the new Dewalt Atomic multi tool for free... saved about 250.00 on the deal! I actually was approached by a milwaukee Rep while is was picking out the dewalt setup at home depot and he asked why I was buying the dewalt so I explained that this particular dewalt tool is superior in many was to the milwaukee multi tool. I told him that until milwaukee steps up their game on this particular tool, alot of Milwaukee guys Wil be purchasing this dewalt tool. He replied with the answer: well I'm sure there are some tools that fit some people's preference in the dewalt line now and then. I assured him that I am still a milwaukee guy at heart... haha! But I did remind him to let milwaukee know that they need to step up to the plate and knock it out of the park on this type of tool in the future to which he agreed.
I have the dewalt for about a year now and it's just great. I have other oscillators like the Milwaukee m18 and I have a Chicago electric corded version. The dewalt is the best I have. And I'm a Milwaukee man lol
@@ToolReviewZone yes indeed just an amazing tool. To be fair I haven't used the ridgid yet I'm sure its a great tool. That quick release is life though lol
The ridgid also has a magnetic tool holder that combats the blade holding issue listed. This tool also isn't new. They replaced their old brushed version recently. I bought the old version six years ago, this is just brushless and updated. Also for tight areas the ridgid with its slim design fits better. Plus the life time warranty on the battery and tool and of course the interchangeable head makes it a winner for me
I use the Ridgid nearly everyday. It's the gen5 not the octane. I use a octane battery though and it seems to overheat and shut down way faster than the DeWalt that I used to use. It's hard to beat the job Max though for the attachment options.
Hey big RIGID fanboy here. Tool Review Zone are you right handed? I think you are. I can tell from the video you have better control with your right hand. I would love for you to switch hands and use the rigid in your left I cut that wood all the time with a oscilation tool it tends to be used as trim! super jealous of the jobmax by the way. Its so nice and it is truly not just an oscilating tool but a multi tool.
This tool is awesome! Love mine and always wear earplugs but I do for many tools anyway. Changing attachments is super easy, especially for small hands.
One of the great features of the oscillating tools is their compact nature to get into tight spaces where you don't even have the stroke room for a hand saw. The front end of the RIDGID is narrower than the DeWalt for tight spaces. The original RIDGID Jobmax was very compact and light weight with the 12 Volt battery system. Unfortunately, the 12 Volt has been discontinued and RIDGID has opted for the standard 18 Volt battery pack. I have 4 alternate heads for the RIDGID which are very valuable. Again, the right-angle drill/driver head and the reciprocating saw head are very useful in confined spaces and the heads can be rotated in any of four directions. There are occasions when an oscillating tool can accomplish a difficult 3 hour job in 20 minutes. Very impressed with my RIDGID Jobmax, but DeWalt definitely nailed the best design for blade change.
Have both we like the Ridgid better, faster, less vibration and lifetime warranty is a no brainer. Both will get the job done but our trucks are now stocked with Ridgid. The Ridgid does have a quick change but the dewalt is slightly quicker changing blades. Gave the Dewalt tools to my brother.
Have a ton of Ridgid tools and love them....but, I also have this DeWalt tool and it’s awesome. Has never let me down and great ergonomics. I go with DeWalt on this one.
The gen 4 jobmax has been fine so far. I’m just goona keep buying different heads , when I need to replace another tool. No complaints here. I’ll upgrade the powerplant at some point. Octane 2 ? Idk.
I would say Ridgid had something good with JobMax, yes it's not perfect, but it was something I was actually willing to buy. I don't have my own garage, so one tool with the abilities of 5 was something to look forward to. Really hope it comes back in an upgraded form!
The real winner is: us, the consumers. If you're a tradesman who needs an oscillating tool daily, I think the DeWalt is the better tool. If you're a DIYer, homeowner, or general handyman who just needs various tools for occasional use, the Ridgid wins. Specific tool wise the DeWalt nails it, but Ridgid went with the multipurpose route which gives it a huge leg up for those who don't need a dedicated tool for each function. Great comparison!
I own a Rigid JM and have used the Dewalt extensively. The Dewalt gave up the ghost after two + years of commercial use. I love the Dewalt quick change blade connect. I do not care for the wonky Rigid slide and push blade inslall lever. The Rigid blade connect needs some engineering to improve the system, and watch out for pinched fingers while installing/removing blades. The Rigid has had head issues, trigger issues, and F-R switch issues. Both work great but Rigid has a LLT warranty compared to Dewalt's 3-year coverage.
Pretty good comparison video. Both tools have their advantages and disadvantages but what sold me on the DeWalt was ease of blade change. Since I'm a DIY'er, I've been using a 10 year old corded Dremel multi tool which works great for me since I only use it once in a while. The one thing I do like about all multi tools are the triangle sanding heads which makes it a breeze to sand inside corners of cabinets and such. Thanks for sharing and have a great Easter Sunday. Cheers.
What's up William! Yeah I have a few of the Dremels and love them, but the cordless is just awesome and has the same power as the corded. Have a great holiday buddy!
I love DeWalt tools, but the flexibility of the additional heads on the Rigid beats the DeWalt hands down. One tool can replace several tools. Both are good brands, but usually I’m more inclined to grab a DeWalt, even if it is a little more costly. This time the Rigid is the one to get. Both are called multi-tool, but the Rigid takes it to another level!!
I honestly don't mind the brand ... I think both brands are great ... I do have the Ridgid and I gotta say IT IS NOT THAT COMPLICATED TO PUT THE BLADE!!!! great review ... You looked like those funny commercials when people can't do anything hahahaha .... But I do love how you can change the heads on the Ridgid is amazing!!!! I have 3 different heads and it makes your life easier ...
I like the detachable head idea on the Rigid. You mentioned a couple of times that the Dewalt needed unscrewed to fit the sanding pad, no it doesn't, it fits on like all the other attachments. The extra screw-on feature is to allow the user to use 'closed' hole blades from other makers.
personally I think the fact that you can't stand it up is good because there's a lot of dummies out there who stand up the tools and when they fall over chip or damage something also I just put a set of rubber bands right underneath the trigger so I can slide them up when I need the auto mode thank you very much for the review man have a great day 😎
I'm a milwaukee guy but I did purchase the dewalt after getting the opportunity to use one on the job last week. I was hesitant to get the dewalt since i am set up with the milwaukee system but after using the tool on the job and seeing so many reviews on YT showing how superior it is to the milwaukee I took advantage of the starter kit deal at home depot where you buy 2 5ah batteries, the charger and a tool bag for 199.00 and you get the new Dewalt Atomic multi tool for free... saved about 250.00 on the deal! I actually was approached by a milwaukee Rep while is was picking out the dewalt setup at home depot and he asked why I was buying the dewalt so I explained that this particular dewalt tool is superior in many was to the milwaukee multi tool. I told him that until milwaukee steps up their game on this particular tool, alot of Milwaukee guys Wil be purchasing this dewalt tool. He replied with the answer: well I'm sure there are some tools that fit some people's preference in the dewalt line now and then. I assured him that I am still a milwaukee guy at heart... haha! But I did remind him to let milwaukee know that they need to step up to the plate and knock it out of the park on this type of tool in the future to which he agreed.
A heavier tool should have less vibration, therefore a nod to RIDGID as you stated, and weight may have helped it to go through the wood quicker as well. Blade change seemed a little awkward on RIDGID. I like to stand my tools up rather than lay them down, so a nod to Dewalt. Both have good batteries. Also, I like the head change and versatility on the RIGID. I'm in the market for an oscillating multi tool and will go with Dewalt solely because I have an investment in their line and don't want multiple batteries and chargers to deal with, and I can walk in any big box store and buy a Dewalt battery if needed as well as blades/bits. Additionally, I just don't see anything bad about the Dewalt to steer me away from them. Thanks much for the review it was helpful.
Do you think the Dewalt battery sticking down below the head so far would interfere with some work where you need the head close to a wall or floor etc and want to go in parallel to that ? It seems to me the ridgid would be better at that?
As a dedicated tool the dewalt should be an undisputed winner. With the added tool heads Ridgid giving it a run for the money makes it a valid challenger. Ridgid Octane for my vote. It can be a maintenance mans one case work shop.
Hey not trying to hate but on the ridgid you put the blade on wrong. The black arbor goes on the outside of the blade not the inside. If you put the blade on the inside it sticks to the head of the tool which is magnetic and the arbor helps hold it on as well, when it's on the outside sandwiching the blade. I own this tool and been using it on the daily. I like it, it's best in class. Good video btw. Just wish you put the blade on right so that you could give accurate information on this tool. Again not hating and keep them ridgid octane videos coming.
I run strictly ridgid these days. Being in commercial Construction I used to run dewalt in the 18v platform. The dewalt hammer drill was junk. I went to ridgid my hammer drill walked circles around dewalt. My job max is also awesome with the different heads. Installing panels the oscillating tool beats makita in comfort and performance. Cuts faster than dewalt too. I know because my coworkers run makita and dewalt. Now if ridgid came out with a portaband the line would be complete.
I have the Ridgid Jobmax and let me tell you the blades have a lot to do with the performance of tool I don't use the blades from ridgid I use the ones from Bosch
I'm waiting to what team red brings out this year but i really enjoyed the options that you have with the Ridgid. Multiple heads using the same base is an awesome feature!
Suggestion, run the same tests with the RIDGID 12V and 18V against their new Octane power handle. Reason I suggest doing it is according to RIDGID their individual head’s power is not governed by their power handle (12V or 18V). The individual head specs comes from the design of their heads. Again according to RIDGID using the 12V or 18V power handle the heads will produce the same results. Also, on the individual box their heads are packaged in read the specs, there is not any differentiation for using it with 12V or 18V; same-same. For many years using both the 12V and 18V JobMax power handles and heads, and sharing these tools with others, nobody noticed any performance difference between 12V and 18V. What we did experience is the18V with a larger Ah battery will run longer than the 12V 2Ah battery; the 12V can also use the RIDGID 12V 4Ah battery as well. All that to say, until RIDGID updates their heads, I do not see any reason for purchasing the Octane handle. When they do upgrade their heads with more torque, RPM, and the like, it will be welcomed and worth upgrading. With both 12V and 18V we ran numerous tests, one was eye opening. We torqued a nut up to the point the 12V could not loosen it; torque test, torque test. At that torque we switched to the 18V, it could not loosen it. That proved to us it is all in the tools head not the power handle.
Both are excellent tools from great companies. Impossible to choose. If you are a Ridgid or Dewalt guy u probably have lots of batteries from your other tools. That probably will dictate your choice. But, either way, you cannot go wrong.
I have both and use both regularly. Dewalt has a stronger motor and does not get bogged down like thr Ridgid does. Also, much more vibrations through the handle with Ridgid. Both good tools. Dewalt is better.
Which batteries and which multi-tool? I'm looking at HD now and I guess I missed the promotion you speak of. But, just FYI, the 2ah batteries are NOT Octane batteries. And Ridgid has an older multi-tool which is similar to the new Octane but not quite as powerful. I myself have the older one and the non Octane 2 ah batteries.
CaseAgainstFaith1 it was the 3ah octane with the Bluetooth. It’s funny because the bundle was actually unable to be bought. Apparently it couldn’t ship or be ready in store for me in my area? But I asked on the ridgid fb page they said just add both to your cart and it applies the discount at checkout. Already used it a couple times since then, it’s definitely helpful. My only grip is the way you remove the tools on it, I always worry I’ll somehow hurt myself lol. I’ve just been using my 4ah batteries with it, but the 3ah are nice too
@@machetekid07 Well, I tried. Didn't seem to work. In fact, for some bizarre reason, the total it was wanting to charge me was HIGHER than the two items added together. Something was way wrong. Oh well.
Bought my first back in the day just to under-cut door jambs for tiling floors, but soon found a thousand more uses for it. Rarely do i do a job that it isn't used for one thing or another. It's one of my favorite tools in my arsenal.
I like both I have used the old jobmax and head change is a added bonus and yes for the Ridgid fanboys I talked a rep the heads for the old jobmax will fit so you can use em with that being said it does look like the Bosch version battery goes on there's the same as Ridgid just no head change with dewat and Ridgid it's a give a take it's up to like what you need it for good video
I have the dewalt think its the best out there mine came in a tstak box with the depth stop dust extractor attachment and ten blades for £145 English pounds great tool
DeWalt only got a 3-year warranty on it. RIDGID got a lifetime warranty on it. I would rather buy A tool with a lifetime warranty on it instead of just three to a two year warranty. That's the reason why I bought my Ridgid Tools. And a whole lot cheaper
@@ToolReviewZone I’m looking to buy something like a 3”-4” circular saw - as small as possible because the normal size/style circular saws scare me & their heavy. (I’m imagining something like a pizza cutter.. but with a guard & a guide..) the Milwaukee 12v cut off tool & the Makita 12v 3 3/8” circular saws looked awesome. But then i learned about the Dewalt Atomic 20v 4 1/2” circular saw.... But I also want a ROUTER. A cordless Router. A mini saw because I’ll be cutting a lot of plywood, & a cordless router so I can make everything detailed. (That’s what a router is basically for.. right?) But it turns out... that in order to really USE a router.... You need some kind of table built for it? Is this so? A table and/or specific “Jigs”? I’ve seen such jigs on TH-cam - but they all seem to be man-made. So... do people just buy the router & then go MAKE a Home-made router table for it? Or.. what? Or do they spend another $150-$300 or who know how much more on a router table to go with their router? CAN a router be used without one? _____________ The reason I’m so interested in having a router is because I want to... add detail to EVERYTHING I plan to make. I want to cut “joints” & “dove tail” cuts.. (the notches that makes wood piece together like a puzzle.) I want to engraved the wood - add detail. When I discovered “wainscoting” I fell in love. Same goes for “Crown Molding.” And those triangular pieces to put in the entry way of a hall or entry way that go into the top corners. I would also like to add detailed trip to every corner. then there’s the corners. I want to make convertible items: like boxes with mirrors in them with engraved detail... & brass pieces for decoration - that latch. I plan to make a set of 3 narrow rectangular tables thet I bought some “full overlay frameless hinges 35mm 100 degree” hinges ... I’m not sure if it’s right for what I need or how it’s gonna work.. I think they’re for cabinets - but I’m hoping to they’ll work for my first project with is: A fold up table that when not in use just appears as a cabinet front as it will be ‘hanging to the left side of my desk top. But it can be lifted up from the bottom to come to a perfect 90 degree angle - to make my plan desk/vanity area that’s going on between 2 large cabinets... become an “L” shaped desk. That way I can do one thing at the normal desk & simple turn to the side to do another thing on the pop up table. Also, I do have 2 maroon Barbour freight multi tools.. but.. I’ve only ever used them as Sanders as it has a triangle piece with Velcro on the end of it. Since I have those.. do I even need this tool? I’m not sure how to the sanding piece off. So I need a router, a small circuit saw.... But I don’t know WHAT brand to go with! I also don’t know WHAT tools are gonna do the most so that I’m not wasting my money on like 5 tools when there was 1 tool that could have done it all.
I'm trying to decide on one of these. Thinking for comfort reasons, being female without huge arm strength. Leaning towards shorter with more girth. Size does matter guys!!!! Hard one though (pun intended) because I love anything Ridgid. Again, pun intended!!! Bahahaha
Kinda hard comparing an old model with an almost 5 years older version bl motor, to a newer tech. When you want to get into those tighter spaces, a shorter tool benefits. If you're in the platform the platform benefits. If you want fast blade change and don't want your fingers getting pinched off, or if you're wearing gloves, the ease and safety is the benefit. If you want lower vibration, the hands benefit. Multihead don't matter if you already have other tools that do the same job. Especially if they cost $40+ a pop.
Hi TRZ, Happy New Year "2020" :) I been looking around and found no videos or reviews on the DeWalt DCS356 3 speed oscillating tool. If you get a chance maybe you can try it out and give the youtubers thoughts / comparison on the newer model.
Nice review. Question, why do you think it necessary playing the dang annoying background music? Remember, folks come to hear you not music. To your video the background music adds zero-zip-nada, it is actually quite a distraction.
I dont like the triggers, easier to just turn to Auto and go like team reds. can turn anyway I need, can hold from multiple places on tool and unlike trigger ones.
Hard to believe that just a year later those tools are both obsolete compared to even the m12 fuel. If you want to have a bad experience with multitools , buy one of these.
Ill say ridgid won this 1 ridgid has less vibration more changeable heads an if u guys didnt notice the dewalt was burning the wood so ridgid for the win all dewalt has is quick release head nothing more
RIDRIG may be longer, but it's also slimmer than the fatter Dewalt. Dewalt only seems to have a better switching tool for blades... that doesn't make it a multitool... it makes it a fancy boy cutter. I look forward to the next head from RIDGID.... the lathe....
3 year warranty for Dewalt...lifetime on the Ridgid. If your Ridgid battery gives up the ghost it is replaced free. If you have a Dewalt go buy another battery. From an economic perspective the winner is Ridgid.
The octane multi tool is 4x better than the non brushless ... the brushed motor sags instantly & is awful at longevity it gets hot sanding under it's own weight after 10minutes and I went ďewalt brushless for my orbital sander
No the Ridgid battery does not all it to free stand, the balance is to apply cutting weight distribution with little to no force,for the different types of little things like triming door jams installing hardwood/tile the battery design has been good for easier cut performance/Dewalt has lower sound pitch easy disconnect/*I went to Ridgid /*everybody else had Dewalt so hard 2 spot your tool & attachments 2 be fair home shop Dewalt, job Ridgid
Ridgid homedepot.sjv.io/A5MM1
Dewalt homedepot.sjv.io/1zddd
Ryobi heads also work on the ridgid
Seems like the ridgid battery orientation will let you get the tool more flat to the ground if your cutting jambs for tile or flooring.
I use mine for just that and even with a 6ah battery it still let's me cut nice and low to the floor
Awesome look at that JobMax, I'm really liking what Ridgid is doing! I gotta tell you, that DeWalt is tough to beat though!!
I agree I think the dewalt is tough to beat
On everything but impacts. 😉🌋🌋🌋🌋
Gotta love the dewalt multi but the rigid has had me intrigued for awhile now bc of the octane system. If my dealt ever does I may go rigid. We all know that my absolute fav “Red” brand has let me down twice with their multi tools. The M12 & M18 both suck IMHO
Ridged all battery powered tools are lifetime on tool and batteries. That hands down beats all powers tools.
My new lineup this year is RIDGID all the way! Especially my new air compressor @ 200psi. That thing rocks!
demikpre ya dude I’m a milly guy myself and I just gave my liver picking up the m18 fuel impact & hammer drill kit
I need to mention this. First off, I have both. I feel the Ridgid has the best blade exchange on the market. There is absolutely no blade that the Ridgid won’t take AND there is a magnet that holds the blade to the tool while exchanging. Also, you are not able to put a dremel blade on the DeWalt without cutting the Dremel blade where it is closed at the end. So you were just running the DeWalt with a Dremel blade that wasn’t completely on. I’m surprised nobody else noticed this. This is why you couldn’t put the blade on correctly when you tried. If you used a blade that fit, the DeWalt would’ve been a lot quieter. Another thing, it is very important that you let the Oscillating Tool do the work for you. Anything more than that, you’re just prematurely burning the blade out and the tool.
So again, Dremel blades do NOT fit on the DeWalt without cutting out the opening with a grinder of cutoff tool.
Please understand that I’m not trying to send a dig your way, I’m just trying to show you the correct way to do so. Any blade is only as good as the user. It can last 5 minutes or 5 months.
Literally. I hope you get to read this and give the comparison another shot.
Dewalt still has the screw for blades that don't fit
Tough call but I'd have to say jobmax. All the different heads are really neat!
RIGID hands down! That is my vote.It's more efficient and more versatile. Thanks for the promo.
I do not know what video you DeWalt fans watched but goodness the Ridgid crushed the DeWalt. Crushed it in performance. Crushed it. The only feature i liked about DeWalt was the quick release. What we did not see was how to add anything other than a blade. RIDGID crushed this comparison. Great video, thanks.
the additional heads are a big plus for me.
I’m a Milwaukee guy but this is one of three dewalt tools I own and it’s amazing.
Yeah, this M18 multi tool, ive read, is lackluster so i purchased the M12 version as not to change battery platforms. Im hoping Milwaukee fixes it this NPS19.
I'll be live streaming from NPS this year
@@ToolReviewZone I cant wait bro.
I'm definitely team red but I gotta give it up to this one. Dewalt knocked it out the park with this one.
I'm a milwaukee guy but I did purchase the dewalt after getting the opportunity to use one on the job last week.
I was hesitant to get the dewalt since i am set up with the milwaukee system but after using the tool on the job and seeing so many reviews on YT showing how superior it is to the milwaukee I took advantage of the starter kit deal at home depot where you buy 2 5ah batteries, the charger and a tool bag for 199.00 and you get the new Dewalt Atomic multi tool for free... saved about 250.00 on the deal!
I actually was approached by a milwaukee Rep while is was picking out the dewalt setup at home depot and he asked why I was buying the dewalt so I explained that this particular dewalt tool is superior in many was to the milwaukee multi tool. I told him that until milwaukee steps up their game on this particular tool, alot of Milwaukee guys Wil be purchasing this dewalt tool. He replied with the answer: well I'm sure there are some tools that fit some people's preference in the dewalt line now and then. I assured him that I am still a milwaukee guy at heart... haha! But I did remind him to let milwaukee know that they need to step up to the plate and knock it out of the park on this type of tool in the future to which he agreed.
I have the dewalt for about a year now and it's just great. I have other oscillators like the Milwaukee m18 and I have a Chicago electric corded version. The dewalt is the best I have. And I'm a Milwaukee man lol
That's what I mean bro. Even the Milwaukee tool guys love this damn dewalt lol. Probably the only video O have without a negative comment lol
@@ToolReviewZone yes indeed just an amazing tool. To be fair I haven't used the ridgid yet I'm sure its a great tool. That quick release is life though lol
Lol
My Dewalt multi tool is probably my favorite thing to use
The ridgid also has a magnetic tool holder that combats the blade holding issue listed. This tool also isn't new. They replaced their old brushed version recently. I bought the old version six years ago, this is just brushless and updated. Also for tight areas the ridgid with its slim design fits better. Plus the life time warranty on the battery and tool and of course the interchangeable head makes it a winner for me
I use the Ridgid nearly everyday. It's the gen5 not the octane. I use a octane battery though and it seems to overheat and shut down way faster than the DeWalt that I used to use. It's hard to beat the job Max though for the attachment options.
Hey big RIGID fanboy here. Tool Review Zone are you right handed? I think you are. I can tell from the video you have better control with your right hand. I would love for you to switch hands and use the rigid in your left I cut that wood all the time with a oscilation tool it tends to be used as trim! super jealous of the jobmax by the way. Its so nice and it is truly not just an oscilating tool but a multi tool.
This tool is awesome! Love mine and always wear earplugs but I do for many tools anyway. Changing attachments is super easy, especially for small hands.
How did I know you would like the dewalt lol
One of the great features of the oscillating tools is their compact nature to get into tight spaces where you don't even have the stroke room for a hand saw. The front end of the RIDGID is narrower than the DeWalt for tight spaces. The original RIDGID Jobmax was very compact and light weight with the 12 Volt battery system. Unfortunately, the 12 Volt has been discontinued and RIDGID has opted for the standard 18 Volt battery pack. I have 4 alternate heads for the RIDGID which are very valuable. Again, the right-angle drill/driver head and the reciprocating saw head are very useful in confined spaces and the heads can be rotated in any of four directions. There are occasions when an oscillating tool can accomplish a difficult 3 hour job in 20 minutes. Very impressed with my RIDGID Jobmax, but DeWalt definitely nailed the best design for blade change.
Awesome feedback 👊👊👊
Have both we like the Ridgid better, faster, less vibration and lifetime warranty is a no brainer. Both will get the job done but our trucks are now stocked with Ridgid. The Ridgid does have a quick change but the dewalt is slightly quicker changing blades.
Gave the Dewalt tools to my brother.
Thanks for the comment Mark!
Job max hands down, not even close. Multi heads wins all. I use dewalt hammer drill, impact driver, etc but job max is best in entire market.
Have a ton of Ridgid tools and love them....but, I also have this DeWalt tool and it’s awesome. Has never let me down and great ergonomics. I go with DeWalt on this one.
The gen 4 jobmax has been fine so far. I’m just goona keep buying different heads , when I need to replace another tool. No complaints here. I’ll upgrade the powerplant at some point. Octane 2 ? Idk.
I would say Ridgid had something good with JobMax, yes it's not perfect, but it was something I was actually willing to buy. I don't have my own garage, so one tool with the abilities of 5 was something to look forward to. Really hope it comes back in an upgraded form!
The real winner is: us, the consumers. If you're a tradesman who needs an oscillating tool daily, I think the DeWalt is the better tool. If you're a DIYer, homeowner, or general handyman who just needs various tools for occasional use, the Ridgid wins.
Specific tool wise the DeWalt nails it, but Ridgid went with the multipurpose route which gives it a huge leg up for those who don't need a dedicated tool for each function.
Great comparison!
Awesome comment JEB513! Thanks bro!
As a Tradesman I would take rigid over dewalt everyday as far as cordless tools. Milwaukee without a doubt has the best cordless tools
Another nice thing on the Ridgid is there's 2 magnets where the blade goes so it holds it on while you flip the lever open and closed
Yeah I covered that in the main review but forgot to state that in this. Great catch
I own a Rigid JM and have used the Dewalt extensively. The Dewalt gave up the ghost after two + years of commercial use. I love the Dewalt quick change blade connect. I do not care for the wonky Rigid slide and push blade inslall lever. The Rigid blade connect needs some engineering to improve the system, and watch out for pinched fingers while installing/removing blades. The Rigid has had head issues, trigger issues, and F-R switch issues. Both work great but Rigid has a LLT warranty compared to Dewalt's 3-year coverage.
Pretty good comparison video. Both tools have their advantages and disadvantages but what sold me on the DeWalt was ease of blade change. Since I'm a DIY'er, I've been using a 10 year old corded Dremel multi tool which works great for me since I only use it once in a while. The one thing I do like about all multi tools are the triangle sanding heads which makes it a breeze to sand inside corners of cabinets and such. Thanks for sharing and have a great Easter Sunday. Cheers.
What's up William! Yeah I have a few of the Dremels and love them, but the cordless is just awesome and has the same power as the corded. Have a great holiday buddy!
Ridgid offers a lot more versatility,with many attachments,and less vibration,both great tools,but I'll go with Ridgid.
Love the dewalt, I have the corded version and it is a beast.
I love DeWalt tools, but the flexibility of the additional heads on the Rigid beats the DeWalt hands down. One tool can replace several tools. Both are good brands, but usually I’m more inclined to grab a DeWalt, even if it is a little more costly. This time the Rigid is the one to get. Both are called multi-tool, but the Rigid takes it to another level!!
Yeah, I definitely agree with you J. Thanks for the feedback bro 👊
I honestly don't mind the brand ... I think both brands are great ... I do have the Ridgid and I gotta say IT IS NOT THAT COMPLICATED TO PUT THE BLADE!!!! great review ... You looked like those funny commercials when people can't do anything hahahaha .... But I do love how you can change the heads on the Ridgid is amazing!!!! I have 3 different heads and it makes your life easier ...
I like the detachable head idea on the Rigid.
You mentioned a couple of times that the Dewalt needed unscrewed to fit the sanding pad, no it doesn't, it fits on like all the other attachments. The extra screw-on feature is to allow the user to use 'closed' hole blades from other makers.
I have both. Both are great tools. I’m leaning more towards DeWalt though.
Thanks for the vote Michael!
personally I think the fact that you can't stand it up is good because there's a lot of dummies out there who stand up the tools and when they fall over chip or damage something also I just put a set of rubber bands right underneath the trigger so I can slide them up when I need the auto mode thank you very much for the review man have a great day 😎
Thanks for the feedback Damien
Lol I like that "auto" feature.
Well said. Dummies!
Preference all day. Ridgid out performed. But Dewalt had a big following. Ultimately, I will choose the tool that I own the most batteries for.
Also like the quick change feature in the dewalt better but the rigid has the different heads
I'm a milwaukee guy but I did purchase the dewalt after getting the opportunity to use one on the job last week.
I was hesitant to get the dewalt since i am set up with the milwaukee system but after using the tool on the job and seeing so many reviews on YT showing how superior it is to the milwaukee I took advantage of the starter kit deal at home depot where you buy 2 5ah batteries, the charger and a tool bag for 199.00 and you get the new Dewalt Atomic multi tool for free... saved about 250.00 on the deal!
I actually was approached by a milwaukee Rep while is was picking out the dewalt setup at home depot and he asked why I was buying the dewalt so I explained that this particular dewalt tool is superior in many was to the milwaukee multi tool. I told him that until milwaukee steps up their game on this particular tool, alot of Milwaukee guys Wil be purchasing this dewalt tool. He replied with the answer: well I'm sure there are some tools that fit some people's preference in the dewalt line now and then. I assured him that I am still a milwaukee guy at heart... haha! But I did remind him to let milwaukee know that they need to step up to the plate and knock it out of the park on this type of tool in the future to which he agreed.
Awesome story James. I love hearing stuff like this 👊
I have both I say the ridgid main reason is the battery placement you can't get in flat places easily and it cuts a little faster
A heavier tool should have less vibration, therefore a nod to RIDGID as you stated, and weight may have helped it to go through the wood quicker as well. Blade change seemed a little awkward on RIDGID. I like to stand my tools up rather than lay them down, so a nod to Dewalt. Both have good batteries. Also, I like the head change and versatility on the RIGID. I'm in the market for an oscillating multi tool and will go with Dewalt solely because I have an investment in their line and don't want multiple batteries and chargers to deal with, and I can walk in any big box store and buy a Dewalt battery if needed as well as blades/bits. Additionally, I just don't see anything bad about the Dewalt to steer me away from them. Thanks much for the review it was helpful.
standing tools with blades upward is a no no
Do you think the Dewalt battery sticking down below the head so far would interfere with some work where you need the head close to a wall or floor etc and want to go in parallel to that ? It seems to me the ridgid would be better at that?
great video... when I got my ridgid i didn't have the option of having choices.... so i got the ridgid... great tool and love it.
Thanks for the comment and feedback wemcal
The 4 degrees extra cut on the ridged/aeg makes it cut faster than most
Luv my 355! Just saying Clint! Thx bro!😁
Yeah buddy 💪 Thanks for the comment Matt👊👊👊
As a dedicated tool the dewalt should be an undisputed winner. With the added tool heads Ridgid giving it a run for the money makes it a valid challenger. Ridgid Octane for my vote. It can be a maintenance mans one case work shop.
Great comment! Thanks for the vote Don!
Can you also use fein starlock blades on the ridgid??
Ridgid are my favorite. Agtee they are both good.
i think this is all about personal preference. i like ridgid. nothing wrong with the dewalt though. ridgid does what i need done at what i can afford.
Hey not trying to hate but on the ridgid you put the blade on wrong. The black arbor goes on the outside of the blade not the inside. If you put the blade on the inside it sticks to the head of the tool which is magnetic and the arbor helps hold it on as well, when it's on the outside sandwiching the blade. I own this tool and been using it on the daily. I like it, it's best in class. Good video btw. Just wish you put the blade on right so that you could give accurate information on this tool. Again not hating and keep them ridgid octane videos coming.
I run strictly ridgid these days. Being in commercial Construction I used to run dewalt in the 18v platform. The dewalt hammer drill was junk. I went to ridgid my hammer drill walked circles around dewalt. My job max is also awesome with the different heads. Installing panels the oscillating tool beats makita in comfort and performance. Cuts faster than dewalt too. I know because my coworkers run makita and dewalt. Now if ridgid came out with a portaband the line would be complete.
Tough call. I like the versatility of the Ridgid though.
I have the Ridgid Jobmax and let me tell you the blades have a lot to do with the performance of tool I don't use the blades from ridgid I use the ones from Bosch
Can you change the head on the Ridgid oscillating tool ?
I'm waiting to what team red brings out this year but i really enjoyed the options that you have with the Ridgid. Multiple heads using the same base is an awesome feature!
Check out the prospective live stream #3 that I did for the Home Depot prospective event last week. It starts out with what ridgid has coming out
Suggestion, run the same tests with the RIDGID 12V and 18V against their new Octane power handle. Reason I suggest doing it is according to RIDGID their individual head’s power is not governed by their power handle (12V or 18V). The individual head specs comes from the design of their heads. Again according to RIDGID using the 12V or 18V power handle the heads will produce the same results. Also, on the individual box their heads are packaged in read the specs, there is not any differentiation for using it with 12V or 18V; same-same.
For many years using both the 12V and 18V JobMax power handles and heads, and sharing these tools with others, nobody noticed any performance difference between 12V and 18V. What we did experience is the18V with a larger Ah battery will run longer than the 12V 2Ah battery; the 12V can also use the RIDGID 12V 4Ah battery as well.
All that to say, until RIDGID updates their heads, I do not see any reason for purchasing the Octane handle. When they do upgrade their heads with more torque, RPM, and the like, it will be welcomed and worth upgrading.
With both 12V and 18V we ran numerous tests, one was eye opening. We torqued a nut up to the point the 12V could not loosen it; torque test, torque test. At that torque we switched to the 18V, it could not loosen it. That proved to us it is all in the tools head not the power handle.
Both are excellent tools from great companies. Impossible to choose. If you are a Ridgid or Dewalt guy u probably have lots of batteries from your other tools. That probably will dictate your choice. But, either way, you cannot go wrong.
I have both and use both regularly. Dewalt has a stronger motor and does not get bogged down like thr Ridgid does. Also, much more vibrations through the handle with Ridgid. Both good tools. Dewalt is better.
Dewalt is far quieter than most tools. Milwaukee and ridgid should give a pair of earplugs with every tool.
The blade must be mounted with concave part outwards, in the dealt the way you mounted is touching the release handle and vibrates a lot.
Right now HD has a special buy two batteries for 150 get a free tool, the ridgid multi tool is one of those. Just ordered mine and picking it up today
Thanks for the info Christian!!!
Which batteries and which multi-tool? I'm looking at HD now and I guess I missed the promotion you speak of. But, just FYI, the 2ah batteries are NOT Octane batteries. And Ridgid has an older multi-tool which is similar to the new Octane but not quite as powerful. I myself have the older one and the non Octane 2 ah batteries.
CaseAgainstFaith1 it was the 3ah octane with the Bluetooth. It’s funny because the bundle was actually unable to be bought. Apparently it couldn’t ship or be ready in store for me in my area? But I asked on the ridgid fb page they said just add both to your cart and it applies the discount at checkout. Already used it a couple times since then, it’s definitely helpful. My only grip is the way you remove the tools on it, I always worry I’ll somehow hurt myself lol. I’ve just been using my 4ah batteries with it, but the 3ah are nice too
@@machetekid07 Well, I tried. Didn't seem to work. In fact, for some bizarre reason, the total it was wanting to charge me was HIGHER than the two items added together. Something was way wrong. Oh well.
Fast blade change, ergonomics and raw power... Nothing can touch the DeWalt OMT.
Vote for Dewalt! Thanks North!
Bought my first back in the day just to under-cut door jambs for tiling floors, but soon found a thousand more uses for it. Rarely do i do a job that it isn't used for one thing or another. It's one of my favorite tools in my arsenal.
If u didnt notice Ridgid just beat dewalt ridgid was alot faster an wasnt burning the wood that mean dewalt was alot slower than ridgid
@@MrSpawnz I guess you should run out and buy the Ridgid. I won't be any competition to you getting the last one off the shelf... lol
@@northgeorgiahandyman2443 yes i will as soon as it's available online
I like both I have used the old jobmax and head change is a added bonus and yes for the Ridgid fanboys I talked a rep the heads for the old jobmax will fit so you can use em with that being said it does look like the Bosch version battery goes on there's the same as Ridgid just no head change with dewat and Ridgid it's a give a take it's up to like what you need it for good video
Thanks bro!
Both good tools but Ridgid's LSA nake the decision easy.
When you root for yellow and get a bit over cooked and turns out orange you get a dose of reality
Lol cool comment
I have the dewalt think its the best out there mine came in a tstak box with the depth stop dust extractor attachment and ten blades for £145 English pounds great tool
DeWalt only got a 3-year warranty on it. RIDGID got a lifetime warranty on it. I would rather buy A tool with a lifetime warranty on it instead of just three to a two year warranty. That's the reason why I bought my Ridgid Tools. And a whole lot cheaper
Thanks. I’m a girl. And I’m trying to buy my FIRST set of tools ever
Milwaukee is the best right now, but dewalt a close second 👊
@@ToolReviewZone I’m looking to buy something like a 3”-4” circular saw - as small as possible because the normal size/style circular saws scare me & their heavy. (I’m imagining something like a pizza cutter.. but with a guard & a guide..) the Milwaukee 12v cut off tool & the Makita 12v 3 3/8” circular saws looked awesome. But then i learned about the Dewalt Atomic 20v 4 1/2” circular saw....
But I also want a ROUTER. A cordless Router.
A mini saw because I’ll be cutting a lot of plywood, & a cordless router so I can make everything detailed. (That’s what a router is basically for.. right?)
But it turns out... that in order to really USE a router.... You need some kind of table built for it? Is this so? A table and/or specific “Jigs”?
I’ve seen such jigs on TH-cam - but they all seem to be man-made.
So... do people just buy the router & then go MAKE a Home-made router table for it? Or.. what? Or do they spend another $150-$300 or who know how much more on a router table to go with their router? CAN a router be used without one? _____________
The reason I’m so interested in having a router is because I want to... add detail to EVERYTHING I plan to make. I want to cut “joints” & “dove tail” cuts.. (the notches that makes wood piece together like a puzzle.) I want to engraved the wood - add detail.
When I discovered “wainscoting” I fell in love. Same goes for “Crown Molding.” And those triangular pieces to put in the entry way of a hall or entry way that go into the top corners.
I would also like to add detailed trip to every corner. then there’s the corners.
I want to make convertible items: like boxes with mirrors in them with engraved detail... & brass pieces for decoration - that latch.
I plan to make a set of 3 narrow rectangular tables thet
I bought some “full overlay frameless hinges 35mm 100 degree” hinges ... I’m not sure if it’s right for what I need or how it’s gonna work.. I think they’re for cabinets - but I’m hoping to they’ll work for my first project with is:
A fold up table that when not in use just appears as a cabinet front as it will be ‘hanging to the left side of my desk top. But it can be lifted up from the bottom to come to a perfect 90 degree angle - to make my plan desk/vanity area that’s going on between 2 large cabinets... become an “L” shaped desk. That way I can do one thing at the normal desk & simple turn to the side to do another thing on the pop up table.
Also,
I do have 2 maroon Barbour freight multi tools.. but.. I’ve only ever used them as Sanders as it has a triangle piece with Velcro on the end of it. Since I have those.. do I even need this tool?
I’m not sure how to the sanding piece off.
So I need a router, a small circuit saw....
But I don’t know WHAT brand to go with!
I also don’t know WHAT tools are gonna do the most so that I’m not wasting my money on like 5 tools when there was 1 tool that could have done it all.
This is the tool I hated the most from the Gen 5 series. Thank God they fixed the overheating issues!!!!
Yeah, big difference between them broski
Great review but wrong blade for testing.. I've both...the dewalt actually burnt out recently
I'm trying to decide on one of these. Thinking for comfort reasons, being female without huge arm strength. Leaning towards shorter with more girth. Size does matter guys!!!! Hard one though (pun intended) because I love anything Ridgid. Again, pun intended!!! Bahahaha
Lol
I have a 4 inch multi tool
Does the Dewalt allow for any head to go on at 4 different degrees?
No
Kinda hard comparing an old model with an almost 5 years older version bl motor, to a newer tech. When you want to get into those tighter spaces, a shorter tool benefits. If you're in the platform the platform benefits. If you want fast blade change and don't want your fingers getting pinched off, or if you're wearing gloves, the ease and safety is the benefit. If you want lower vibration, the hands benefit. Multihead don't matter if you already have other tools that do the same job. Especially if they cost $40+ a pop.
Ridgid wins! My next toy, I mean TOOL.
Haha
I agree, I love my toys, I mean tools!
ridgid has less vibration is cutting way smoother without burning and dewalt everything other way round ...
This is a great review.
The music in the background is just deprivational.
Hi TRZ,
Happy New Year "2020" :)
I been looking around and found no videos or reviews on the DeWalt DCS356 3 speed oscillating tool. If you get a chance maybe you can try it out and give the youtubers thoughts / comparison on the newer model.
Happy new year Michael! Sure will buddy 👊
@@ToolReviewZone
I know they don't sell that model in Home Depot. I found that model at Lowe's.
Nice review. Question, why do you think it necessary playing the dang annoying background music? Remember, folks come to hear you not music. To your video the background music adds zero-zip-nada, it is actually quite a distraction.
I strongly disagree
i'M GOING FOR THE dEWALT dcs355 just because of the blade install/removal is better than ridgid
Great comparison bud! 👍🏻
Thanks Tool Girl!
ridgid is my choice
Rigid has 3.4 degree vibration angle and Dewalt is smaller than 3 degrees.
i put a sanding pad right on my dewalt, it fits right on
www.lowes.com/pd/dewalt-oscillating-tool-pad/50219129?cm_mmc=shp-_-c-_-prd-_-tol-_-google-_-lia-_-129-_-rotaryandoscillatingtools-_-50219129-_-0&store_code=2355&gclid=Cj0KCQjwkK_qBRD8ARIsAOteukD3bZPpacVqdlB_Zc3nmM1P0qCxnLYSje68nTIkbd07JECZvb7FFnEaAtq_EALw_wcB&gclsrc=aw.ds
this pad goes right on the dewalt, just like the blades
I would say the ridgid has to oscillate more per revolution than the dewalt
I'm a big Ridgid user, but that DeWalt is better long term. The vibrations off the jobmax become too much for long term usage.
I dont like the triggers, easier to just turn to Auto and go like team reds. can turn anyway I need, can hold from multiple places on tool and unlike trigger ones.
I’ll take the rigid ,more versatile.,battery orientation better.
Hard to believe that just a year later those tools are both obsolete compared to even the m12 fuel. If you want to have a bad experience with multitools , buy one of these.
Ill say ridgid won this 1 ridgid has less vibration more changeable heads an if u guys didnt notice the dewalt was burning the wood so ridgid for the win all dewalt has is quick release head nothing more
Dewalt every time
That rigid is super loud like my ryobi
RIDGID OCTANE JOBMAX all the way !!
Dewalt Atomic 20v Multi tool + 2ah battery for 99$ cant be beat though.
RIDRIG may be longer, but it's also slimmer than the fatter Dewalt. Dewalt only seems to have a better switching tool for blades... that doesn't make it a multitool... it makes it a fancy boy cutter. I look forward to the next head from RIDGID.... the lathe....
I’d like a little more length AND girth myself. 🙏
Lol
Ridgid 👍
Noise wise I think the dewalt wins to much noise is never good working inside
I was actually surprised with the noise comparison. Though the Ridgid would take it, but it was definitely the dewalt
Are you from Pennsylvania?
Lol I was born and raised in the Pittsburgh area. Great ear!
Tool Review Zone wife is from South Hills and I lived in Da Burgh for years. Go Stillers! 😉
Go STILLERS!
You sound like Dewalt fun
3 year warranty for Dewalt...lifetime on the Ridgid. If your Ridgid battery gives up the ghost it is replaced free. If you have a Dewalt go buy another battery. From an economic perspective the winner is Ridgid.
So I would choose Milwaukee 😂
Defo nicer pitch on dewalt
The octane multi tool is 4x better than the non brushless ... the brushed motor sags instantly & is awful at longevity it gets hot sanding under it's own weight after 10minutes and I went ďewalt brushless for my orbital sander
Haven't used the non OCTANE but thanks for the info 👊
No the Ridgid battery does not all it to free stand, the balance is to apply cutting weight distribution with little to no force,for the different types of little things like triming door jams installing hardwood/tile the battery design has been good for easier cut performance/Dewalt has lower sound pitch easy disconnect/*I went to Ridgid /*everybody else had Dewalt so hard 2 spot your tool & attachments 2 be fair home shop Dewalt, job Ridgid