I am absolutely thrilled to own this router. Bought mine a couple months ago and I am still amazed every time I use it! Great video and love the " supercalifragilistic RIGID alidocious"!!
It works even better if you feed it against the direction the bit is spinning. So if your doing the outside of the piece, left to right(counterclockwise), if you’re doing an inside cut, clockwise.
Sometimes its hard to do with the camera. I often need to do things that I wouldn't because I'm trying to get the camera angle. Thanks for the feedback
This is the next tool next month to add to my Ridgid cordless arsenal. Great review. One thing you may want to consider: With my other routers and edge guides, I pick up a painting stick from Home Depot, cut it down to about 8 inches or your desired length, then screw it in to the two holes on the edge guide. Make sure you countersink you screws. Use a little paste wax on the piece of wood and you have a much more stable router that will not wobble. Also the wood will protect your work from scratches. Thanks for this excellent review.
I was sold on the Makita until NPS. That m18 looks nice! The features on the ridgid at the price point make me consider grabbing a starter kit just for the sweet router! What’s one more battery platform? It just gives me more options! Keep it up TRZ! Love the reviews, they are very thorough and you don’t hesitate to point out the negatives, always fair and unbiased!
What's up Sick!!! Yeah bro, they each have their perks, but I really like the compact for the day to day woodworking. They did good with this one. Thanks for the comment bro!!!👊
Nice review. I own one of these bad boys and is actually the reason for me being apart of the ridgid battery platform i agree with the power button, after a year of using it, i still haven't gotten use to it.
I have the non octane version it is still a beast yes the on-off button is the same way other than that it does what I need to do I'm just wondering is the new deshia will fit on the old body find out later keep up the great work take care of the kids and wife cheers in a beer
I have the gen 5 non octane. But I believe the other problem with this router is the light and the fact it has no dust collector to instal your vacum. The light just shines one side and create a dark shadow in the opposite side. Than the dust builds up and shoots out very quickly creating a mess in your station. I also had a 3amp octane battery and it almost die on me after 30min of use and my router heated up. All I did was route the inside of a wood. Not that large space, just 4 by 4 inches and that thing got HOT.
I have this unit. The power button is designed to turn on and off with a one handed operation in my opinion. Just use your right hand and use your thumb to flip on and off. Push your thumb into cut out on th bottom and it turns on easily.
Just bought the cordless vac for $149 with battery plus 10% off with military discount. The router is my next get. I'll use it to plunge fruiting into some posts.
Ridgid has released an even better version of this now, Model R860444. It has a die cast body for reduced vibration. Also more power. It might be too heavy to use comfortably? I would love to see a review.
Very interesting. I would definitely check with Ridgid on the dust collector. Even the homedepot.com site lists it but the owner’s manual doesn’t mention it. That is the main reason I was waiting for this new one. Otherwise it still only has one led instead of adding more, still has the same power switch, same cumbersome (to install) edge guide, and looks like the same base plates that won’t accept guide bushings....correct? Thx for the review!
The base plates have a chamfered edge on the inside and flush on the outside. This is my first router but it’s my understanding is that type doesn’t accept any ready made bushing sets out there. I did get the milescraft circle cutting jig that comes with an offset baseplate that accepts at least their bushing types.
Just a correction, the online manual I was looking my at was oh the HD site and they had the manual for the old one on the new one’s page so that explains it not mentioning the dust adapter. I expect Ridgid will send you one.
Great video. Definitely getting this before the heat gun. It seems to run pretty good on the 3ah. Would the 6ah make a difference or would it weigh it down. I thought you might break into a song or two with all that RIDGID alidocious. 🤣🤣🤣💯. Just what I have been waiting for.
@@ToolReviewZone I have been waiting for this to hit the shelves and reviews because I want to cut my own floor moldings for my living room. I will work on a song list for ya, hahaha. Funny little touch to the video 🍻
This vid would make for a gnarly drinking game, take a shot every time you say supercalifragilisticRIGIDlidocious. Of course, away from all power tools.
Mine came with the vac attachment in the bag with everything else. It’s clear and replaces the clear plate opposite the opening in the front. You definitely should have gotten one. I bought one of these routers within 2 days of it being available online.
How good is the battery for long constant use and is it top heavy with battery? The looks cool for routing signs and such with more freedom and no cord in the way.
What's up Cleve's. Na buddy, not top heavy at all. I had this going straight for over 30 minutes the other day and still had battery power to go. Depends on a lot of different variables, but should get around 45 minutes of nice use on a 3.0
I also have the non octane version of this and it is great. I agree that the power button is the only thing I really don't like about it. If you aren't in the Ridgid battery system but are in the Ryobi battery system, check out their cordless router. It looks very similar and both routers are made by TTI. For a homeowner or light-duty hobby work, that maybe good enough for you and save you some money.
I didn't like that switch at first, but it grew on me, as I got accustomed to how easy it is to shut it off. No hunting for a rocker switch under a rubber cover somewhere and struggling to kill the power. Easy power-off is kinda important when there's an open-air razor-sharp piece of carbide whizzing around within inches of your hands.
Lol, I'm using that word in the next video bro!. The Milwaukee m18 router felt really powerful when I used it at the NPS. This is much smaller and compact.
@@ToolReviewZone I have heard great things about them both actually, I just need to get one but I am team Yellow and Black, I only own 1 Ridged tool and that is my tile saw.
@@ToolReviewZone years ago I bought the Ridgid impact and drill combo and they were so slow, so I got into Makita and about 1 1/2 ago Switched to Dewalt, but anyway it is impressive how Ridgid has gotten better over the years. I actually am going to buy the Ridgid paddle mixer I think, for mixing thinset and grout.
PLEASE HELP! I have this router and the depth keeps drifting deeper as I'm routing. I can see the little wheel turning as I go and of course that is NOT GOOD for the job I'm doing! What the heck?!? Anybody had this issue? Suggestions?
I’m having some trouble with my trim router. It drops down when in use. I’ve tried troubleshooting the problem by adjusting the fasterners. Any other ideas why the height adjustment drops while cutting?
Got to have one. Am just waiting to see they can bring out a full size router that can do raised panels sounds foolish. But the way things are going anything is possible.
Wednesday morning I was working at my town job Sanitation and I got to pick up a stop of garbage I first see a motorcycle ramp and then I look inside a box and find a porter cable router and good condition the bit was shot that was rusted the cord was fine but gave it to my dad he looked it over and said that there's absolutely nothing wrong with it I find tools all the time in the garbage
Sometimes I toss stuff that I sometimes know still works. Problem is when I ask if someone wants it they say know, and I run out of room around the house
Tool Review Zone I fully understand you're giving something away and you feel like if something breaks they're going to let you know about it what 22 years working for the town I found some really really nice things I usually end up giving it to my father I need to go to the car shows swap meets and sell the stuff
IF SOMEONE actually worked with routers before they designed this then the power button would be much better! The kids in the design dept are jokers! I have a lot of feed back for them and judging by the replies on a lot of their tools so do their consumers!
The sound of this router is too terribly noisy. If you operate a Dewalt router, it makes difference. I used this router for a small cut, the motor stopped working, so I returned it.
Buy Here homedepot.sjv.io/G4zNr
I am absolutely thrilled to own this router. Bought mine a couple months ago and I am still amazed every time I use it! Great video and love the " supercalifragilistic RIGID alidocious"!!
It works even better if you feed it against the direction the bit is spinning. So if your doing the outside of the piece, left to right(counterclockwise), if you’re doing an inside cut, clockwise.
Sometimes its hard to do with the camera. I often need to do things that I wouldn't because I'm trying to get the camera angle. Thanks for the feedback
Tool Review Zone I wasn’t throwing shade. I was just throwing that out there. Great video! I just bought mine, but I got the dust collection.
This is the next tool next month to add to my Ridgid cordless arsenal. Great review. One thing you may want to consider: With my other routers and edge guides, I pick up a painting stick from Home Depot, cut it down to about 8 inches or your desired length, then screw it in to the two holes on the edge guide. Make sure you countersink you screws. Use a little paste wax on the piece of wood and you have a much more stable router that will not wobble. Also the wood will protect your work from scratches. Thanks for this excellent review.
Thanks for the comment and feedback Gregg!!!
That's a great improvement idea, thanks!
I was sold on the Makita until NPS. That m18 looks nice! The features on the ridgid at the price point make me consider grabbing a starter kit just for the sweet router! What’s one more battery platform? It just gives me more options! Keep it up TRZ! Love the reviews, they are very thorough and you don’t hesitate to point out the negatives, always fair and unbiased!
What's up Sick!!! Yeah bro, they each have their perks, but I really like the compact for the day to day woodworking. They did good with this one. Thanks for the comment bro!!!👊
What is NPS?
Zac Chan Milwaukee’s new product symposium usually June!
Yup just grabbed one today lol! What's one more battery platform!
Nice review. I own one of these bad boys and is actually the reason for me being apart of the ridgid battery platform i agree with the power button, after a year of using it, i still haven't gotten use to it.
I have the non octane version it is still a beast yes the on-off button is the same way other than that it does what I need to do I'm just wondering is the new deshia will fit on the old body find out later keep up the great work take care of the kids and wife cheers in a beer
I have the gen 5 non octane.
But I believe the other problem with this router is the light and the fact it has no dust collector to instal your vacum.
The light just shines one side and create a dark shadow in the opposite side. Than the dust builds up and shoots out very quickly creating a mess in your station.
I also had a 3amp octane battery and it almost die on me after 30min of use and my router heated up. All I did was route the inside of a wood. Not that large space, just 4 by 4 inches and that thing got HOT.
I have this unit. The power button is designed to turn on and off with a one handed operation in my opinion. Just use your right hand and use your thumb to flip on and off. Push your thumb into cut out on th bottom and it turns on easily.
Just bought the cordless vac for $149 with battery plus 10% off with military discount. The router is my next get. I'll use it to plunge fruiting into some posts.
Ridgid has released an even better version of this now, Model R860444. It has a die cast body for reduced vibration. Also more power. It might be too heavy to use comfortably? I would love to see a review.
Can you use guide bushings with the factory base plate?
Very interesting. I would definitely check with Ridgid on the dust collector. Even the homedepot.com site lists it but the owner’s manual doesn’t mention it. That is the main reason I was waiting for this new one. Otherwise it still only has one led instead of adding more, still has the same power switch, same cumbersome (to install) edge guide, and looks like the same base plates that won’t accept guide bushings....correct?
Thx for the review!
Hmmm, that's a great question about the bushings. Maybe Ridgid can help answer this, but if not I'll find out. Thanks for the comment Daniel
The base plates have a chamfered edge on the inside and flush on the outside. This is my first router but it’s my understanding is that type doesn’t accept any ready made bushing sets out there.
I did get the milescraft circle cutting jig that comes with an offset baseplate that accepts at least their bushing types.
bjt3833 thx. Yeah there are aftermarket ones which should work as long as the opening is big enough. Shame Ridgid doesn’t include one or even sell one
Just a correction, the online manual I was looking my at was oh the HD site and they had the manual for the old one on the new one’s page so that explains it not mentioning the dust adapter. I expect Ridgid will send you one.
Great job I just got into the Ridgid platform and I think this will be my next purchase
My brushless just died but i always liked it , i went out amd bought this one , hope it lasts !
Register it to get lifetime warranty
Great video. Definitely getting this before the heat gun. It seems to run pretty good on the 3ah. Would the 6ah make a difference or would it weigh it down. I thought you might break into a song or two with all that RIDGID alidocious. 🤣🤣🤣💯. Just what I have been waiting for.
Lol any song requests John? Lol. I don't think the 6.0 would be all that bad, but the 3.0 is perfect for it.
@@ToolReviewZone I have been waiting for this to hit the shelves and reviews because I want to cut my own floor moldings for my living room. I will work on a song list for ya, hahaha. Funny little touch to the video 🍻
@@johnrice9121 thanks bro. If you get it, let me know how you like it buddy. Always great to hear feedback
This vid would make for a gnarly drinking game, take a shot every time you say supercalifragilisticRIGIDlidocious. Of course, away from all power tools.
🤣🤣 sounds fun
Love the word you created
Thanks bro lol
Looks nice! Great review!
Looking good, I have not seen it yet in hardware. Should be here in Canada soon.
Yeah bro, should be
Mine came with the vac attachment in the bag with everything else. It’s clear and replaces the clear plate opposite the opening in the front. You definitely should have gotten one.
I bought one of these routers within 2 days of it being available online.
Yeah that's what I thought. Thanks for the feedback bjt!
Noise level is nice to not to loud
Question, what bit did you use for that plunge cut? Thanks.
How good is the battery for long constant use and is it top heavy with battery? The looks cool for routing signs and such with more freedom and no cord in the way.
What's up Cleve's. Na buddy, not top heavy at all. I had this going straight for over 30 minutes the other day and still had battery power to go. Depends on a lot of different variables, but should get around 45 minutes of nice use on a 3.0
I love mine!!!
I bought the older one less than 6 months ago. It’s basically the same without the speed control.
Love the edge guide
I also have the non octane version of this and it is great. I agree that the power button is the only thing I really don't like about it. If you aren't in the Ridgid battery system but are in the Ryobi battery system, check out their cordless router. It looks very similar and both routers are made by TTI. For a homeowner or light-duty hobby work, that maybe good enough for you and save you some money.
I didn't like that switch at first, but it grew on me, as I got accustomed to how easy it is to shut it off. No hunting for a rocker switch under a rubber cover somewhere and struggling to kill the power. Easy power-off is kinda important when there's an open-air razor-sharp piece of carbide whizzing around within inches of your hands.
How this comes with the dust hood but not the 110 v version ?
Such a smooth cut on speed 1
Looks yummylicious. I have the older Ridgid cordless router but still debating if I get the Milwaukee
Lol, I'm using that word in the next video bro!. The Milwaukee m18 router felt really powerful when I used it at the NPS. This is much smaller and compact.
That router is very nice
How does tht Ridgid Router compared to others. Which cordless Router do u think is best?
Everything you need to know right here bro th-cam.com/video/kxOIPZ2k-4U/w-d-xo.html
Which one is better Ridgid or Dewalt?
What's up Mark! Haven't tried the Dewalt, so by process of elimination, it goes to Ridgid for me
@@ToolReviewZone I have heard great things about them both actually, I just need to get one but I am team Yellow and Black, I only own 1 Ridged tool and that is my tile saw.
@@markgross3256 probably want to go dewalt since you are investing already Mark
@@ToolReviewZone years ago I bought the Ridgid impact and drill combo and they were so slow, so I got into Makita and about 1 1/2 ago Switched to Dewalt, but anyway it is impressive how Ridgid has gotten better over the years.
I actually am going to buy the Ridgid paddle mixer I think, for mixing thinset and grout.
PLEASE HELP! I have this router and the depth keeps drifting deeper as I'm routing. I can see the little wheel turning as I go and of course that is NOT GOOD for the job I'm doing! What the heck?!? Anybody had this issue? Suggestions?
I’m having some trouble with my trim router. It drops down when in use. I’ve tried troubleshooting the problem by adjusting the fasterners. Any other ideas why the height adjustment drops while cutting?
I have a corded and 2 cordless Ridgid router I was thinking about getting the Dewalt or the new Ridgid octane.
Haven't tried the Dewalt Renato, so I can't speak for that one, but I really do like this
Is the vac attachment supposed to come with it ?
Has it on the box. I would assume that it would come with it David? It's just a small little plastic piece that attaches the the base
DAVID BUKER mine came with the vac attachment in the little bag with everything else. It replaces the clear window opposite the opening.
Nice plunge cut
Great review! #TSBOC
Thanks Herman!
It isn't a "warranty". It is a service agreement.
I agree I dont like the power button either
use your right hand thumb and just flip it on by inserting in the cut out
@@kone4381 I understand how to use the tool my comment was a Statement of me agreeing that I don't like the power button either
Have you tried the dust port?
Can’t you just take the base off and do the collet easier?
Yeah you could if you wanted too. Great point
@@ToolReviewZone NICE! I am receiving this tomorrow in the mail and was hoping so.
I take off 5 points for not having metric scale!
I would have liked your review but I found myself annoyed at you catch word. Just saying.
ok
Agree, great review, annoying buzz word
Got to have one. Am just waiting to see they can bring out a full size router that can do raised panels sounds foolish. But the way things are going anything is possible.
Yeah absolutely right Marvin. They are dropping new tools every week it seems. Hopefully soon bro
Wednesday morning I was working at my town job Sanitation and I got to pick up a stop of garbage I first see a motorcycle ramp and then I look inside a box and find a porter cable router and good condition the bit was shot that was rusted the cord was fine but gave it to my dad he looked it over and said that there's absolutely nothing wrong with it I find tools all the time in the garbage
Sometimes I toss stuff that I sometimes know still works. Problem is when I ask if someone wants it they say know, and I run out of room around the house
Tool Review Zone I fully understand you're giving something away and you feel like if something breaks they're going to let you know about it what 22 years working for the town I found some really really nice things I usually end up giving it to my father I need to go to the car shows swap meets and sell the stuff
this thing stalled at quarter inch depth cut
You obviously grabbed an open box at home depot, that's why the part was missing hah
@@ToolReviewZone hah it was a sarcastic joke because home depot is notorious for that.
@@ffhomeimprovement2495 Ahhh, got it lol
IF SOMEONE actually worked with routers before they designed this then the power button would be much better! The kids in the design dept are jokers! I have a lot of feed back for them and judging by the replies on a lot of their tools so do their consumers!
smashed the lie button....
broke my mouse, thanks
Haha, thanks and sorry Wildlander
The sound of this router is too terribly noisy. If you operate a Dewalt router, it makes difference. I used this router for a small cut, the motor stopped working, so I returned it.
Maybe the reason why it was loud is because it was faulty?
Just as loud as any other router. The noise comes from the bit not the tool ya smarty
My gawd, I cringe whenever you say 'super...'
Ummmmm.....ok
Quick question. When İ tighten the bolt, it doesn't hold the router bit. Any idea why would that be? Thanks in advance