Opel (Vauxal) Vectra 2.2 starting problem. Injector seals change.

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ก.พ. 2025

ความคิดเห็น • 48

  • @mozzer999
    @mozzer999 10 ปีที่แล้ว +4

    The difficult bit is taking off the camshaft without disturbing the timing. That whole bit is missing!
    Tie wrap the chain to the cam sprocket. Keep max tension on the chain sprocket by using bungee cords or similar.
    Mark the cam and sprocket as there is no keyway.
    Set engine to approx TDC. 1+3 pointing up I seem to recall. Remove the vac pump.
    Put a screwdriver or drill bit in the sprocket resting on the head to stop it turning. Unbolt.
    Now follow the tutorial above, preferably without over loud music drowning out the speech.
    Nice video!

  • @one2nd1
    @one2nd1 8 ปีที่แล้ว +5

    The Bosch VP30/VP44 injector pumps are the killers of these bomb proof engines! Use supermarket diesel and it will eat the rubber in the injector seals, PUMP SEALS!!! and spill off pipes, which will allow air into the fuel circuit causing air locks, which can also seize the pumps too.! You can fit a 12v primer pump which I also fitted with a non return valve to lock the fuel pressure, Yes it works but its no a proper fix, When these engines start having poor start problems, You know 100% the damage is done!

    • @VitorMadeira
      @VitorMadeira 6 ปีที่แล้ว

      Spot on indeed... And then, a 1200 Euro repair bill to renew the fuel pump... :(

    • @VitorMadeira
      @VitorMadeira 6 ปีที่แล้ว

      @benz merc yeah, I would also like to know that too...

    • @potnudles
      @potnudles 6 ปีที่แล้ว

      Google is a great tool

  • @armandofragapacheco
    @armandofragapacheco 9 ปีที่แล้ว +1

    Thank you, now is working well.

  • @aures85
    @aures85 10 ปีที่แล้ว +3

    hi,mabe you have full video whit that part when you removing the camshaft and how it done thanks

  • @rikiandereggen388
    @rikiandereggen388 7 ปีที่แล้ว +1

    Is it necessary to remove the distribution chain to remove the camshaft?

  • @1jummen
    @1jummen 7 ปีที่แล้ว +1

    Wich 12v priming pump is most easy to fit in the car?

  • @ogangefaker1195
    @ogangefaker1195 5 ปีที่แล้ว +1

    Hey friends please how you remove a camshafts and change seals

  • @youbold4
    @youbold4 10 ปีที่แล้ว +4

    Thanks for the video, but kill the crap music next time! xxx.

  • @davidholmes6047
    @davidholmes6047 3 ปีที่แล้ว

    Good video - would've been even better without music.

  • @waseemhaider3937
    @waseemhaider3937 10 ปีที่แล้ว +2

    How much it's cost you to fix it coz seems like I have same problem with my car saab 93 2.2 tid?

    • @nuevavision812
      @nuevavision812  10 ปีที่แล้ว

      The o-rings cost around 50 euro. But you should check first all the little vacuum tubes that run through the engine compartment. It might also be a problem with a leaking one leading to a closed air valve (it might be a not so expensive repair).

    • @fahdyoyo479
      @fahdyoyo479 9 ปีที่แล้ว

      +Nueva Vision contact me please.

    • @one2nd1
      @one2nd1 8 ปีที่แล้ว

      Abit late, The Bosch VP30/VP44 injector pumps are the killers of these bomb proof engines! Use supermarket diesel and it will eat the rubber in the injector seals, PUMP SEALS!!! and spill off pipes, which will allow air into the fuel circuit causing air locks, which can also seize the pumps too.! You can fit a 12v primer pump which I also fitted with a non return valve to lock the fuel pressure, Yes it works but its no a proper fix, When these engines start having poor start problems, You know 100% the damage is done!

    • @dejanivanovic4079
      @dejanivanovic4079 5 ปีที่แล้ว

      @@nuevavision812 can you tell me the number of the O rings so i can buy ?

    • @AirsoftCityValencia
      @AirsoftCityValencia 5 ปีที่แล้ว

      @@dejanivanovic4079 it was a long time ago. I don't remember.

  • @mosuoerakuoane3126
    @mosuoerakuoane3126 10 ปีที่แล้ว +1

    I have opel Vectra 2004 model 2.2 petrol. so the problem is not starting and the mortar modulator is dead and the heater is not working, I live in Lesotho and is very difficult to get the parts of import car like this one I have.

  • @ekaterinekaxidze6795
    @ekaterinekaxidze6795 10 ปีที่แล้ว +1

    hello, i have opel vectra 2.2 turbo diesel, it was like ideal car becouse it was working excellent, and one morining he didnt want to start , i chanje diesel pump but nothing good, please help me ( Georgia )

  • @OszDarjo
    @OszDarjo 9 ปีที่แล้ว +11

    I think the music is too noisy when trying to concentrate to follow the video! Doesn't need it!!

    • @nuevavision812
      @nuevavision812  8 ปีที่แล้ว +1

      +Usmanto Darjo Sorry for that :(

    • @VitorMadeira
      @VitorMadeira 6 ปีที่แล้ว +1

      Yeah, the video is excellent, but the music just doesn't help at all... :(

  • @sedatbc6390
    @sedatbc6390 7 ปีที่แล้ว

    Hello. I have a opel vectra c 2.2 dti 2004 model. Now my car wont start. (Km 213.000) i replacement glow plugs, fuel filter and leak off pipes alls new. But i see some thinks. When i change leak off pipes in pipes have black oil :/ what is this problem ? My car 1 month same not working please send me message

  • @joselolopez3635
    @joselolopez3635 8 ปีที่แล้ว

    con cuanos km cambiastes los sellos¿

  • @shuaibadams2811
    @shuaibadams2811 7 ปีที่แล้ว

    For the guy who knows a little about cars my low reduction starter it runs nd starts strong bendix moves but it does not turn.where do I start with operation

  • @maqsoodmanan60
    @maqsoodmanan60 7 ปีที่แล้ว

    How to clean injector opel vectrs b1998

  • @SuperReGyNa
    @SuperReGyNa 8 ปีที่แล้ว

    salut ma poti ajuta e vorba de un opel vectra 97,,,2.0 x20dtl perd tin vitesza trebuie sa apas pe pedala de aceleratie de mai multe ori casa prind vitesa si se aprinde, EDC MA POTI AJUTA

  • @angelo151099
    @angelo151099 8 ปีที่แล้ว

    si puo smontare senza togliere l'albero a camme ?

  • @MrSportmonkey
    @MrSportmonkey 11 ปีที่แล้ว

    why not install a 12v electric priming pump instead?

    • @nuevavision812
      @nuevavision812  11 ปีที่แล้ว

      We wanted to solve the problem and in the end completely eliminate the added priming pump.

  • @electron936
    @electron936 9 ปีที่แล้ว +1

    Hi there I have a vectra b dti change the intake manifold because the swirl flaps were just moving. It took for ever to start ran it for a good 50 miles with op com the swirl flaps were opening and closing some times, and loses power at 85 mph turned engine off all fine again but this was happening before the change. my vectra went in to limp mode with the emissions light on and loss of turbo. The code on the op com p0105 turbo boost sensor change it and light out and lots of power. stopped car for about 1 hour and car would not start after a good 20 minutes fired up but when I stop and letf standing hard to start again.Looking on the interet I soodenly have al lsortes of problems. It could be this it could be that any help pleas.

  • @direktorsvemira1374
    @direktorsvemira1374 3 ปีที่แล้ว +1

    Its 2.0 dti

    • @Mountains88
      @Mountains88 3 ปีที่แล้ว

      How do you know?

    • @direktorsvemira1374
      @direktorsvemira1374 3 ปีที่แล้ว +1

      EGR is not like on 2.2

    • @Mountains88
      @Mountains88 3 ปีที่แล้ว

      @@direktorsvemira1374 hi!
      My car is a Opel Vectra B caravan and have the same engine, and it is a 2.2 DTI from 2002.
      I'm a little confused right now.
      I think the code number of my engine it's a y22DTR.
      What do you think 🤔?
      Y22DTR or y22DTH?
      Thanks! 👍

  • @maqsoodmanan60
    @maqsoodmanan60 7 ปีที่แล้ว

    My car Opel vectra b 1998 2 Nummer plug black with

  • @erduanyt3430
    @erduanyt3430 8 ปีที่แล้ว +1

    whats with the loud music. i thought this is a video to find out how to fix shit not listen to THIS LOUD music, or maby its just my mistake i ended up over here by mistake. anyway TURN IT OFF OR TURN IT DOWN

    • @kettyca666
      @kettyca666 5 ปีที่แล้ว

      Cry me a river

  • @davidlewis2117
    @davidlewis2117 7 ปีที่แล้ว +1

    Useless this does not show how to remove the injectors only the feed bar/clamp

    • @AirsoftCityValencia
      @AirsoftCityValencia 7 ปีที่แล้ว

      Hi David. It shows how to change the seals that tend to leak. The video wasn't intended for more than that and it doesn't claim that in the title or anywhere else.

  • @richprice190
    @richprice190 9 ปีที่แล้ว +1

    2l dti engine egr cleaned, engine wont start! put easy start in air cleaner system, it starts. the engine needs cleaning out, such a shit design.

  • @lloydpenfold486
    @lloydpenfold486 8 ปีที่แล้ว +1

    Awful loud music NOT necessary!