A light coat of waxoyl under those arches will see them through and probably outlast you haha. Waxoyl is great as it doesn’t ever really harden it just seeps into all the seems and any chips in the paint through capillary action. Its also breathable so it’ll always keep the water out. Great job for keeping rust at bay ive some stuff here that got a light coat 10 yrs ago and not a spec of rust on them now.
Agri farming Ireland stone chip is also a waste of time on rusty surfaces. For all ya know the inside surface could be rusting away, but by looking at the outside hard shell you’d think it’s fine
Great job! What size of air compressor are you using for your paint gun? Is there and act to mixing paint correctly for spraying? Got most of the kit and paint ready to tidy up our old JD1950 but not had any experience using a spray gun!
It’s only a standard enough. Tank is about 3ft long and 14-16” high. Your local paint shop will tell you what ratios to mix your paint depending if it’s got a hardener or just tinkers to be mixed. If you have a heater and can take the cold out of metal it’s a great help. Turn the paint down to a low flow out of the spray gun and that’ll give u a chance to get used to it. It’s pretty simple once you get going.
Don’t know the capacity but it’s big enough. Just the electric motor type. Fine for norm mechanic works. But It won’t build up pressure fast enough for this job. It’s why sand blasters use the engined wheel compressors. They have constant pressure.
Yea we've the same type of compressor, 200l motor type but some of the panels on tractors here are going the same as users and when i seen this, I got to thinking about picking up one of the pots to do small bits.
Hello young man, I would use Everbuild Blackjack DPM on the underside of the wheelarches, it doesn't go rock hard but does a great job and is better than underseal. I have used it on many things including the underside of a wooden trailer floor. Just an idea!
Silage and muck not long doing it’s thing to metal work good to see you keep on top of it ,
Great way to recycle the farmers journal. U look after your machines so well👍👍
Awesome work mate 🤙🏻
Shed envy haha great vid love how it's coming together
A light coat of waxoyl under those arches will see them through and probably outlast you haha. Waxoyl is great as it doesn’t ever really harden it just seeps into all the seems and any chips in the paint through capillary action. Its also breathable so it’ll always keep the water out. Great job for keeping rust at bay ive some stuff here that got a light coat 10 yrs ago and not a spec of rust on them now.
Im happy to see you take good care of your equioment
Im on holidays so cant watch as fast as would like. Btw great vid gerry
No problem Zach. You still made it 😊
Good video but you should really have nitrile gloves on and a face respirator pref 3m to protect you from the paint fumes
Looking really good man. I've been watching your general for a while now, 1st time I've commented
Top job as always 👍 you should refurb Alan Clyde merlo next! 😂😂
Gotta admit, I've still not come across anyone who keeps there gear in such good shape 👍
Great video Gerry keep it up
Thanks John
That sound you have some tractor
Sand blastin a real sure method o gettin rid o any deep rust pockets 💪 a good coat o paint on her an shud see u good for a few years 👍👍
What etch primer did you use?
looking good gerry .
Getting there. Wana have it all done for tomorrow 😊👍
Looks great
Is there much shot blast grit/sand left around after it or is it minimal? Tasty job as always over there!
Would you not spray the inside of the mudguards with stone chip protection . Would be a lot better than normal black paint
I had considered it but my paint supplies said it’s a waste of time because it still chips. So I opted not to. I’m just going on what he said
Agri farming Ireland stone chip is also a waste of time on rusty surfaces. For all ya know the inside surface could be rusting away, but by looking at the outside hard shell you’d think it’s fine
Cowboys Dont care if it’s prepped properly and all the rust is removed stone chip if it’s applied right makes a good job out of the mudguards
Great job! What size of air compressor are you using for your paint gun? Is there and act to mixing paint correctly for spraying? Got most of the kit and paint ready to tidy up our old JD1950 but not had any experience using a spray gun!
It’s only a standard enough. Tank is about 3ft long and 14-16” high. Your local paint shop will tell you what ratios to mix your paint depending if it’s got a hardener or just tinkers to be mixed. If you have a heater and can take the cold out of metal it’s a great help. Turn the paint down to a low flow out of the spray gun and that’ll give u a chance to get used to it. It’s pretty simple once you get going.
@@gerry6420 cheers! appreciate the advice 👍🏻
Tidy men what did the 69 replace ?
Nothing. Before it we had the 6420s and 2850
Well Gerry what compressor are you running the blaster with?
Don’t know the capacity but it’s big enough. Just the electric motor type. Fine for norm mechanic works. But It won’t build up pressure fast enough for this job. It’s why sand blasters use the engined wheel compressors. They have constant pressure.
Yea we've the same type of compressor, 200l motor type but some of the panels on tractors here are going the same as users and when i seen this, I got to thinking about picking up one of the pots to do small bits.
@@gerry6420 what blasting gun are you using and roughly how much sand did this job use? Thanks
Tasty Gerry I’m look for a 6930 my self they say the head give bother
On early ones head gaskets were an issue. From 2010 on not do much. Never had any issues with our. It’s 2011
Sound for that I’m look for one with front linage and to drive the fusion I made a few short video back a few year podge95xf
Hello young man, I would use Everbuild Blackjack DPM on the underside of the wheelarches, it doesn't go rock hard but does a great job and is better than underseal. I have used it on many things including the underside of a wooden trailer floor. Just an idea!
Wee bit malfunction when editing Gerry?
David E probably 😂.... what did I do
@@gerry6420 a clip twice of the sand blasting
Maybe. I’ll look. If so it’s not ment to be in twice
First
Boom.... in first