I had a gen 3 Maddog and I loved it. My gas gauge stopped working and speedometer was about 7mph off bit I absolutely loved it. I dislike that they went back to the more square tires instead of the rounded rear tire.
Super excited for upgrades. I was in between a csc city slicker or the MDIB150. . . . . . No one has done anything with the city slicker yet so the ice bear is looking pretty nice!
Won’t tell you who to get it from. Gotta research the company before purchase. It is a lot of money for one of these. I got mine from bobcatsmotorsports.com but the shipping times took months.
you can tell the boy is happy with his purchase,the other guy said does it have oil and everything,the boy said i dont know and went ahead and cranked it up and revved her up lol.the white wheels made it look like a girls bike like you see walking thru walmart,get some hand grip tassels with glitter haha barbie mobile.
@@Aldama5523 thank you ! Just ordered mine ! Got the red one. I subbed to your channel cause I don’t know nothing about mechanics so your videos def help. Keep em coming ! Ps. Thanks for the reply broski
Hi, I just got one and assembled it but the front light not on how do I fix that? There no oil no gas yet. And how do I adjust idle just in case. Thanks
There is a small screw on the side of the carb too adjust idle A/F mixture. There is also a cable to adjust A/F mixture for the jets I believe. I know there’s two on my engine.
Hey man where did you buy this from. I tried icebear but they only whole sale. I was looking for the direct connection from China..lol. or a good deal here in the USA
Well, it came pretty much assembled. I just had to put on the handle bars, front wheel and front brakes and it was ready to ride. Although, it being a Chinese replica, it does break and you will need to diagnose issues at some point. Don’t recommend if you aren’t mechanically inclined. It’s broken a few times already.
I purchased one and it was delivered today. It was 85% assembled. So the question I have. When I go to start it it won’t start. It just spends like I guess. Not sure if the is a switch to turn on for the gas to get to the carburetor somewhere if so can’t find it. Any help would be awesome. Thank you
Are you holding the brake when you try to start it? Does it crank? There isn’t a fuel valve but take off the fuel line to the carb and see if fuel comes out. Yeah man, you’re going to get real familiar with it.
Pull off the fuel pump inlet and see if fuel can come out of the gas tank? If it does, you might have a bad fuel pump. It’s important to make sure you have no kinks in the vacuum lines because it is vacuum operated fuel pump.
Did you have problems with front wobble? I have the 2022 3Wheel 150cc and have only 49 miles on it, and I have not been able to do more than 30 and I get wobbling in front and hesitation throttle when trying to do much more. I will need to take it to someone to look at this week. Wondering about your experience.
I have not had front wheel problems. But if you watch my second video you can see my rear wheel wobbles but I can go full speed without issues. I figure I just need a new set.
@@Aldama5523 Thanks for your reply. Just dropped it off. First time driving on road the wobble wasn’t bad actually. But still can’t go above 33. The guy says it might be a spark plug. It was a lot of fun riding. Just got my class M license so I’m pretty excited ~ LOL.
Great question. I will make a video on what I think about it. I would definitely buy another one and has been pretty reliable but has had its bugs that needed to be fixed. Like when I removed the can off the intake and the back pressure exhaust tube. The carb needed to be adjusted but I’m sure the scooter would’ve been fine had I not messed with it lol
I have my friend's scooters (in winter storage) in my shed. She has both gas and electric. While the electric is fun it will barely run more than 30 min, then needs to be charged for 8 hrs to use again. The tech needs to get better before I'd EVER buy one
@@juliodiaz4493Electric has way better acceleration for something this size. The trade off is time to charge the battery vs. a couple minutes to fill the gas tank
Hey man I'm really looking into getting one of these but can't find a reputable site that won't fuck it up during delivery. Who did you use and are you happy with the service you got?
Bobcatsmotorsports.com and it took 6 months to arrive from china because of Covid, nothing to do with bobcats but overall happy with the scooter/service. 10/10 recommend.
I prefer the term: "Chinese" lol, I've owned a few Chinese pit bikes and motorcycles, and yes they require some additional "tuning" here and there, but anyone that knows about dirtbikes, quads or minibikes could figure the maintenance out, and make adjustments here and there. Bottom line: If you don't understand basic mechanics, don't buy a cheaper version of a Honda Ruckus, or Grom.
I 🙈 that shit everyday I see a motorcycle I rode a bike 🚲 and flat line 4 times I'm going to use want time I have to get the word out I don't think I will post the video
Not for the faint of heart. It is cheap and does break. I wouldn’t recommend to anyone that doesn’t know how to work on things. I enjoy the scooter and don’t mind working on it or cars. That’s the name of the game. Build, break, build it stronger.
I had a gen 3 Maddog and I loved it. My gas gauge stopped working and speedometer was about 7mph off bit I absolutely loved it. I dislike that they went back to the more square tires instead of the rounded rear tire.
You better make more videos. Great start so far. Thanks for sharing.
Thanks for watching!
Would of been nice to slow down & explain some stuff. Had a part on mine that I had no clue where it goes.
I with you on the "white on blue" look.......
Glad you like it. Thanks for watching!
The white wheels give it a completely different look Nice touch
That looks killer with those white rims 👍🏆.
Thanks for your time!
Love the Hoonigan shirt!! ❤️
Super excited for upgrades. I was in between a csc city slicker or the MDIB150. . . . . . No one has done anything with the city slicker yet so the ice bear is looking pretty nice!
I'm still thinking about purchasing one of these. It's either this, a Radrunner or a Navi.
Navi’s look great!
thats some good cruizin right there Big CONGRATTS bro thanks for showing us how it comes an all that
So fun
th-cam.com/video/vnjRNz81MFs/w-d-xo.html
yo this is fire lol never even knew these existed
Unless something goes seriously wrong, I'm 💯 getting myself one for my Birthday this year.
Mine will be burgundy though
People buy the 49cc cause you need no license. Your 150cc comes licensed as a 150cc and you need a motorcycle endorcement in most states.
Just got my first maddog scooter it's a 2015 gy6 icebear maddog it's used but o well I love mine
How’s it holding up?
White rims look awesome
Congratulations 😊
Yup it came out pretty sweet to look at and to ride I bet👍🏻🙋🏻♂️...
Looks good, take care….
Honda Ruckus?
It’s a Chinese knock off. Cheaper, comes already moded. Runs and looks great.
NOt supposed to crank starter for more than 5 seconds ..but good start.
Those white wheels do look better.
Thanks for watching!
Where did you buy your maddog.....I live in the Atl and I can't find a maddog nor a ruckus
Bobcatsmotorsport.com
Cajunmaddogs.com
Isnt there a blue option for main color and a white option for secondsry color? Wouldnt that make the wheels white
Not sure. I just did it myself.
Looks sick bro! How do you register it, to drive it on the road? What website did you order it from?
Very affordable good time
th-cam.com/video/vnjRNz81MFs/w-d-xo.html
我制造的这款是电驱动的电动摩托车
Hey man like the video just curious I’m about to order 1 of these bad boys literally tomorrow ready to purchase who should I buy it through?
Won’t tell you who to get it from. Gotta research the company before purchase. It is a lot of money for one of these. I got mine from bobcatsmotorsports.com but the shipping times took months.
you can tell the boy is happy with his purchase,the other guy said does it have oil and everything,the boy said i dont know and went ahead and cranked it up and revved her up lol.the white wheels made it look like a girls bike like you see walking thru walmart,get some hand grip tassels with glitter haha barbie mobile.
We checked for oil! And I’ve done an oil change since then too haha the wheels are temporary! Looking for a set
What kind of paint did you use ? And did you have to sand the rims down ? Or just straight on painted
Rustoleum 2x ultra cover gloss white. And didn’t bother with prep work. This paint lays down pretty good and it’s durable. Still looks great.
@@Aldama5523 thank you ! Just ordered mine ! Got the red one. I subbed to your channel cause I don’t know nothing about mechanics so your videos def help. Keep em coming ! Ps. Thanks for the reply broski
Thanks for watching. There’s lots of groups on Facebook for any help you may need.
Very nice. Have you had any problems with the fuel gauge and the speedometer?
Fuel gauge is terribly inaccurate and the speedometer reads about 1-2 mph faster than what you’re actually going
I want one so bad
бля !!!! какой классный -себе такого хочу !!))
I need to see how to run...
Did you just fill it and plug the battery and it started?
Yes.
I think the white one would be sick with BBS Gold painted wheels. What do you think?
What kind of paint did you use for the rims?
To be specific, “Rustoleum painters touch 2x ultra cover paint and primer premium high gloss” in WHITE. Great rattle can 👌🏾
IS THAT SMALL LITTLE BLACK FILTER FOR THE CARB???WHERED U GET
It was inside the factory intake. Drill out the rivets and it’s inside.
@@Aldama5523 oh sick didn’t know thanks!
Hi, I just got one and assembled it but the front light not on how do I fix that? There no oil no gas yet. And how do I adjust idle just in case. Thanks
There is a small screw on the side of the carb too adjust idle A/F mixture. There is also a cable to adjust A/F mixture for the jets I believe. I know there’s two on my engine.
Hey man where did you buy this from. I tried icebear but they only whole sale. I was looking for the direct connection from China..lol. or a good deal here in the USA
Bobcatsmotorsports.com
How easy is the assembly for someone that doesn't work on cars or bikes?
Well, it came pretty much assembled. I just had to put on the handle bars, front wheel and front brakes and it was ready to ride. Although, it being a Chinese replica, it does break and you will need to diagnose issues at some point. Don’t recommend if you aren’t mechanically inclined. It’s broken a few times already.
...я думал, что ты из зуммера будешь делать трайк!!!
Thanks for watching!
@@Aldama5523 ...да на здоровье!!!
So you got to get a Tag because it is not a 50cc ???
I purchased one and it was delivered today. It was 85% assembled. So the question I have. When I go to start it it won’t start. It just spends like I guess. Not sure if the is a switch to turn on for the gas to get to the carburetor somewhere if so can’t find it. Any help would be awesome. Thank you
Are you holding the brake when you try to start it? Does it crank? There isn’t a fuel valve but take off the fuel line to the carb and see if fuel comes out. Yeah man, you’re going to get real familiar with it.
@@Aldama5523 yes I am holding the break down. It just turns over does not crank or fire up
I’m not getting any gas to the carb. It’s clogged somewhere
Pull off the fuel pump inlet and see if fuel can come out of the gas tank? If it does, you might have a bad fuel pump. It’s important to make sure you have no kinks in the vacuum lines because it is vacuum operated fuel pump.
Can, I get the final price please
I paid $2,235 shipped in 2021.
@@Aldama5523 what the top speed? I understand you can get an upgrade of some sort for more speed. Do you need an endorsement?
@@jeffbisel4655 50mph and yes.
Nice how much was it to send to ur door
$2,235 and a 6 month wait.
do you have to have motorcycle license to ride that
In Arizona, yes. 49cc and up needs a motorcycle license in Arizona.
Do you need a motorcycle license for this? And license plates as well?
Here in Arizona. 49cc or less, you don’t need a license. 50cc and up you need a license. All vehicles need to be registered and insured.
Did you have problems with front wobble? I have the 2022 3Wheel 150cc and have only 49 miles on it, and I have not been able to do more than 30 and I get wobbling in front and hesitation throttle when trying to do much more. I will need to take it to someone to look at this week. Wondering about your experience.
I have not had front wheel problems. But if you watch my second video you can see my rear wheel wobbles but I can go full speed without issues. I figure I just need a new set.
@@Aldama5523 Thanks for your reply. Just dropped it off. First time driving on road the wobble wasn’t bad actually. But still can’t go above 33. The guy says it might be a spark plug. It was a lot of fun riding. Just got my class M license so I’m pretty excited ~ LOL.
@@Aldama5523 Also - what’s the max speed you’ve reached?
It got up to 52mph with the stock rollers. I swapped them out for the 10g sliders and now it’s get up to 55mph.
Where did you buy yours
Bobcatsmotorsports.com
It will hit 55. I’ve gotten63. 500 miles so far.
Where did u buy it?
Bobcatsmotorsports.com
Where do you buy these?
Bobcatsmotorsports.com
Is it a drum brake in the rear?
Yes and they do make disc conversation kits for these.
Where can I order the gen 5 from
Bobcatsmotorsports.com
Anyway you can refer me the link to buy one!!?
Bobcatsmotorsports.com
So it's been a month I have to ask
Would you buy another one? How's it been as far as reliability?
Great question. I will make a video on what I think about it. I would definitely buy another one and has been pretty reliable but has had its bugs that needed to be fixed. Like when I removed the can off the intake and the back pressure exhaust tube. The carb needed to be adjusted but I’m sure the scooter would’ve been fine had I not messed with it lol
What state you live.
Arizona
How did you buy it and where did you order it from sir
Bobcatsmotorsports.com
Sorry I deleted old question post new one didn’t see your reply
how much cost you
and where i buy it
Bobcatsmotorsports.com
Its a great looking bike. They should make an electric version of it.
The company didnt but some guy did in Florida. Dude from Rolling Wrench got it on YT
Noooo E bike gas yes⛽️ 👌 😎
I have my friend's scooters (in winter storage) in my shed. She has both gas and electric. While the electric is fun it will barely run more than 30 min, then needs to be charged for 8 hrs to use again.
The tech needs to get better before I'd EVER buy one
@@juliodiaz4493Electric has way better acceleration for something this size. The trade off is time to charge the battery vs. a couple minutes to fill the gas tank
Where did you order from?
Bobcatsmotorsports.com
This is not legal in CA😢.
Hey man I'm really looking into getting one of these but can't find a reputable site that won't fuck it up during delivery. Who did you use and are you happy with the service you got?
Bobcatsmotorsports.com and it took 6 months to arrive from china because of Covid, nothing to do with bobcats but overall happy with the scooter/service. 10/10 recommend.
Top speed
54 mph
where the store outlet of this bro? or store to buy?
I got mine at bobscatsmotorsports.com
Is that a stock exhaust?
Yup. Came with the scooter.
what kind spray paint did u use????
To be specific, “Rustoleum painters touch 2x ultra cover paint and primer premium high gloss” in WHITE. Great rattle can 👌🏾
What's the weight limit?
What do they run?
Not sure the weight limit. I weight 210 pounds and it will go 55mph. It came with a 150cc engine.
How much it cost ya?
2k and 6 month shipping time. It came from china and Covid doesn’t help either.
@@Aldama5523 hello sir beautiful bike where i can buy is there any website?
@@Aldama5523 why China you can buy these in the states?
How much broo
$2,235 shipped to my door.
where did you order it from again?? I've got a gen 2 wanna buy a new one.
Bobcatsmotorsports.com, heads up. Took 6 months to get mine from china. Covid still slowing everything down.
Remember guys. Its a knock off!
I prefer the term: "Chinese" lol, I've owned a few Chinese pit bikes and motorcycles, and yes they require some additional "tuning" here and there, but anyone that knows about dirtbikes, quads or minibikes could figure the maintenance out, and make adjustments here and there.
Bottom line: If you don't understand basic mechanics, don't buy a cheaper version of a Honda Ruckus, or Grom.
how much is it?
$2,235 shipped to my house.
can you send me the info soI can buy one please
I picked this one up off bobcatsmotorsports.com. Just a heads up. Mine took 6 months to get delivered.
You did not ride it 😖
Los guarda fangos falta
Wear helmet dont end up dead like the guy i killed a few months ago in my mom kia
I 🙈 that shit everyday I see a motorcycle I rode a bike 🚲 and flat line 4 times I'm going to use want time I have to get the word out I don't think I will post the video
Take off the silencer
🛵lucu
All these bikes are junk!! I know cause I had one!!! Brand new and had problems with it!!! Chinese JUNK!!!!!
Not for the faint of heart. It is cheap and does break. I wouldn’t recommend to anyone that doesn’t know how to work on things. I enjoy the scooter and don’t mind working on it or cars. That’s the name of the game. Build, break, build it stronger.
Where did you order it?
Bobcatsmotorsports.com