probably for the metal value only, war axes are razor sharp with a very slim profile bc they are built for penetration rather than to act as a wedge like splitting axes do. the mass of bronze would also have been a lot smaller due to needing to be fairly light so it can be swung around a whole lot before causing exhaustion.
Right, for over a thousand years bronze age man built decorative axes, knives, saws, chisels and swords😂🙄 None of them were built for real use but they sure kept them shiny
@@seal8900 1) this is bronze bozo. Says it right in the title and you can see him adding tin right in front of your eyes. 2) bronze tools are easily work hardened and produced excellent tools. Certainly not as hard as tempered steel but good bronze is significantly harder and tougher than mild steel and was plenty good enough for working wood. 3) even relatively pure copper (not bronze) can be work hardened and were used as knives and tools prior to the bronze age. The ancient Egyptians used both copper and bronze to make the enormous cross-cut saws that cut 20+ ton slabs of granite (with an abrasive).
Copper axe +102 damage to enemies -2 swing speed +repaired by electricity and copper wires +becomes 3× stronger when electrified and gains huge knock back and +20 swing speed -in charged stage it uses 2 more durability when hitting -charged state duration taken down by 10 seconds when standing still
@@dannyeckerd9324I would agree with the other guy but only since I learnt to secure the head into the handle with gravity first and then after cutting it down to put in the wedge so that the handle will be tight to the head. I mean again it's still a display peace sinces it's a copper axe.
@@user-qz8fi6xb3g it was a bit too acidic if I remember correctly and it took some of the copper with it, and the girl also had a disease where copper builds up in the body but hadn't known about it until she ate the salad RU: он был немного кислым, если я правильно помню, и с ним ушло немного меди, и у девушки также было заболевание, при котором медь накапливается в организме, но она не знала об этом, пока не съела салат UA: він був трохи кислим, якщо я правильно пам’ятаю, і він забрав частину міді з собою, і дівчина також мала хворобу, через яку мідь накопичується в організмі, але не знала про це, поки не з’їла салат
Dude your the real deal!! I have seen many things in my life you take the cake! Great work, i Really love the axe and the hammer. THANKS FOR SHARING YOUR CRAFT KIND SIR!!
The Copper Axe is the first axe the player will obtain, and is weaker than the Iron or Lead Axe. It has an alternate ore version, the Tin Axe, which is slightly stronger.The Copper Axe is now used to craft the Axe of Regrowth in 1.4.4.Newly created characters will spawn with this item in their third inventory slot. Like all axes, it is used to cut down trees, cacti and giant glowing mushrooms. Alternately, it can be purchased from the Merchant for 4.
This is really cool. Always was looking forward to crafting tools and building other materials outside. I was curious to know were you got this material from, but I just look for it ; it's all part of the fun.😊
I always have so many questions pop into my head when watching these, like, what goes into the crucibal with the metal? What kind of sand is that, that it keeps its form so well? Its a great skill to have thats for sure...
The sand is nothing special except for being packing sand patted down enough to pack in tightly, with gentle handling the sand will hold the imprint. Edited cos I goofed.🥴
@@rustyhowe3907 Its not wet sand, its casting sand, if it were wet the water would boil and explode into steam the second he put liquid bronze into the mold and ruin the casting.
You will be surprised at how hard you can get copper using a technique called cold hammering. Try it yourself take a piece of copper wire, and a hammer and use just below moderate force tap the copper while simultaneously rolling it while tapping on a hard surface, like a cinderblock or piece of concrete then try to bend the cold hammered copper compared to a normal piece. It’s roughly 10 to 15 times harder. Don’t ask me why just science
@@ghostoftheUchiha3250 a hatchet is made to cut wood, not stone, and bronze will do the job pretty nicely. Don't underestimate ancient metals, they will work fine, but you will have to maintain them regularly.
@@jeanladoire4141 no shit I don't think bronze would cut anything harder than lead🤣🤣! you have to sharpen a bronze hatchet after every use. do you know what happens when you sharpen something? You're removing material from the tool. it will last about 1/8 the time any normal hatches you buy from harbor freight would. have you ever noticed there aren't any hand-me-down bronze axes are hatchets that have been in use for generations? no. my father still has blacksmithing tools and an axe that has been in my family since the mid-1800s and they're in great condition with very little damage
Pro tip: Spend a little more time with the hard shaping abrasives before polishing with the rag wheel & compound. The finish will not be as wavy and you won’t telegraph the flaws.
You have to learn us the art of making a core, then you will avoid all drilling afterwards. Great that you show this so that we don't forget that we can make things ourselves without having to go to the store to buy everything. I worked for a year in an iron foundry when I was young.
I don't know how I've never had the idea (especially when I work with copper myself). I think the idea stemmed from the way he has it bundled at the beginning. But I want to, or want someone to, make small cartoons stile witches brooms out of entirely copper. I just think it would he pretty neat.
The axe head was made from bronze, a combination of copper (the wires) and tin (the grey pellets). The ancient Greeks (and others) used it for armour, weapons and statues in the time before steel was invented, and they had no problems with murder and mayhem using bronze. Think of Troy!
You will be surprised at how hard you can get copper using a technique called cold hammering. Try it yourself take a piece of copper wire, and a hammer and use just below moderate force tap the copper while simultaneously rolling it while tapping on a hard surface, like a cinderblock or piece of concrete then try to bend the cold hammered copper compared to a normal piece. It’s roughly 10 to 15 times harder. Don’t ask me why just science
For us it’s just a few seconds of beauty Bot for this man it’s so long and hard job Please assist him and take 👍🏼 and more comment and share it . Bless you man , so cool ✊🏽
If you cast the mold sideways you can make a plug for the handle instead of drilling, and if you hammer onto the edge before polishing, it will hold a stronger edge
In the Edo era, Japanese beaches, provided sand for forging the Katanas. Iron ore in the sand and charcoal, created hard edges with flexibility. 11 folds would give you over 2,000 layers. A Japanese soldier, took his inherited blade to a heavy machine gun barrel, sword won.
Japan has quite low-quality iron ore. To be able to work around this, they refine the iron a LOT while forging it. Could an old (traditional steel, not imported) sword break a machine gun? Probably, especially if it had been firing and was very hot (hot steel is less strong and hard). But the sword would have been at least slightly damaged and would not have cut through the barrel
What were those other metals? Depending on the alloy that may be considered norse gold, which has a hardness far beyond bronze, it's closer to a low carbon steel
What is that powder that you just sprinkled on the red plastic axe and is that red axe head is plastic? I don't know everything about casting but it was pretty fun to watch.
@@JustRememberWhoYoureWorkingFor the "salt" is borax to act as a flux, the "stone" is a lump of tin that mixes with the copper to make the alloy known as bronze
Any ancient warrior would be proud to own that.
Любой адекватный древний воин никогда бы не использовал медь для орудия. Она слишком мягкая.
@@TheSvolo4b Это бронза, а не медь..
probably for the metal value only, war axes are razor sharp with a very slim profile bc they are built for penetration rather than to act as a wedge like splitting axes do. the mass of bronze would also have been a lot smaller due to needing to be fairly light so it can be swung around a whole lot before causing exhaustion.
@@kjmartin815 weren't axes used to blunt and pierce armor too?
Doubt. That thing will fold over after a good strike. Probably looks cute on a wall though.
For those who don't know what was that white powder, that was Borax to clean molten metal.
Thank you very much that was kind. He add Copper &……&……. Idont know what the other editings
Thanks.
It's borax and what?
And the pellets and the stone? What were those materials?
Спасибо я думал он посолил😂
The pellets were some form of tin I wager, because bronze is an alloy of copper and tin (thanks RuneScape)
If a serial killer hit me with that axe I’d apologize for staining their axe with my blood
:0
You should be there to apologize
@@spideyxcdHe can be there, just without a hand, or a foot. xd
id yell jerk and try to fight em off i could
Make sure to clean it for him afterwards
Now that's what i call a proper Copper Chopper
Sometimes I see a comment and I wonder how on earth it only has eight likes while some silly, obvious one has over a thousand...
That ax looks too nice to be used. 😊
That's because you can't use it. After a couple of chops with that thing it's going to bend and warp beyond belief. That is just a decoration.
@@TheTexasViking I know, copper is a malleable metal so it would get dented and bent
Right, for over a thousand years bronze age man built decorative axes, knives, saws, chisels and swords😂🙄
None of them were built for real use but they sure kept them shiny
@@amosbackstrom5366
1: this is copper
2: their tools were very poor quality
@@seal8900
1) this is bronze bozo. Says it right in the title and you can see him adding tin right in front of your eyes.
2) bronze tools are easily work hardened and produced excellent tools. Certainly not as hard as tempered steel but good bronze is significantly harder and tougher than mild steel and was plenty good enough for working wood.
3) even relatively pure copper (not bronze) can be work hardened and were used as knives and tools prior to the bronze age.
The ancient Egyptians used both copper and bronze to make the enormous cross-cut saws that cut 20+ ton slabs of granite (with an abrasive).
Like a true Italian: never break the spaghetti in two when cooking them in the pot, may they be made of flour or brass.
That's copper, not brass
@@JohnSmithThe4th nerd
Как истинный Русский медь на приём металла! Топорик хорошь
i was literally thinking that when i saw the metal being melted like that.
it did look like when you _properly_ cook spaghetti.
He bent them though
Copper axe
+102 damage to enemies
-2 swing speed
+repaired by electricity and copper wires
+becomes 3× stronger when electrified and gains huge knock back and +20 swing speed
-in charged stage it uses 2 more durability when hitting
-charged state duration taken down by 10 seconds when standing still
ok
It is bronze axe.😊
I don’t need an axe, but god damn, that looks beautiful
everyone needs an axe
That's a display piece right there.
😂
I hope so since the head was not set properly and will surely fly off the handle with light use
He can sell it copper gets u decent money well in my place that is
@@blueberrychronichow is it not set properly? I've hafted a few axes in my time and I didn't see anything out of the ordinary in this video
@@dannyeckerd9324I would agree with the other guy but only since I learnt to secure the head into the handle with gravity first and then after cutting it down to put in the wedge so that the handle will be tight to the head. I mean again it's still a display peace sinces it's a copper axe.
The forbidden spaghetti
There was a medical case of a girl getting copper poisoning from a potato salad made in a copper pan
@@ZA-mb5di вы это серьёзно , в медной посуде нельзя готовить ?
@@user-qz8fi6xb3g it was a bit too acidic if I remember correctly and it took some of the copper with it, and the girl also had a disease where copper builds up in the body but hadn't known about it until she ate the salad
RU: он был немного кислым, если я правильно помню, и с ним ушло немного меди, и у девушки также было заболевание, при котором медь накапливается в организме, но она не знала об этом, пока не съела салат
UA:
він був трохи кислим, якщо я правильно пам’ятаю, і він забрав частину міді з собою, і дівчина також мала хворобу, через яку мідь накопичується в організмі, але не знала про це, поки не з’їла салат
mf beat me to it
@@lapipadelmonosame
I get completely hypnotized by these... Idk if its normal or not.
Dude your the real deal!! I have seen many things in my life you take the cake! Great work, i Really love the axe and the hammer. THANKS FOR SHARING YOUR CRAFT KIND SIR!!
The Copper Axe is the first axe the player will obtain, and is weaker than the Iron or Lead Axe. It has an alternate ore version, the Tin Axe, which is slightly stronger.The Copper Axe is now used to craft the Axe of Regrowth in 1.4.4.Newly created characters will spawn with this item in their third inventory slot. Like all axes, it is used to cut down trees, cacti and giant glowing mushrooms. Alternately, it can be purchased from the Merchant for 4.
Did you copy paste that from a Terraria Wikipedia
@@kingofeurobeat9332 what gave it away?
I love that it's just "for 4" and no unit of currency, idk why but that kinda joke always kills me
this not pure copper axe, i think alloy with some mater
Terraria
« In case of a fire, don't forget to protect the axe »
Beautiful work
👍 Wonderful video art work. We highly appreciate your effort. Thank you.
It looks like something that should be in a fireman’s museum,if it was in a fireman’s axe style
It's viking axe
@@MybeautifulandamazingPrincessdo I know you from somewhere?
@@Ihatethisfame You dreamed about me 😌
@@MybeautifulandamazingPrincess 🤣 maybe?
This is really cool. Always was looking forward to crafting tools and building other materials outside. I was curious to know were you got this material from, but I just look for it ; it's all part of the fun.😊
I always have so many questions pop into my head when watching these, like, what goes into the crucibal with the metal? What kind of sand is that, that it keeps its form so well? Its a great skill to have thats for sure...
The sand is nothing special except for being packing sand patted down enough to pack in tightly, with gentle handling the sand will hold the imprint.
Edited cos I goofed.🥴
White sand name.?
@@shoaibndf8178 Who said white sand name, I was just asking what sand is used..
@@rustyhowe3907 Its not wet sand, its casting sand, if it were wet the water would boil and explode into steam the second he put liquid bronze into the mold and ruin the casting.
@@shoaibndf8178 Probably Borax or some sort of flux
Weapon achieved: the copper axe 70 dmg 60 defense can oxidise when left in poor condition
Oxidization removes strength and sharpness but adds poison damage and shrapnel when it breaks
It's actually bronze,, and alchemy of copper and tin,, becomes magically hard
@@big.gib.4L thx for extra stats
Amalgam, not alchemy
can never be too careful the internet has people who actually enjoyed chemistry not just to pass the tests
May I say, THAT is just lovely!
Simply stunning craftsmanship! Congrats my friend 🎉
It's a piece of cake to make something like that. I know what I'm talking about. years
Been casting bronze life-size statues for 9 years.
Nice choice with the black handle, looks good with the gold.
I think I'd prefer a steel axe for edge durability, but that thing sure is purdy.
You use the nice one for special enemies and the steel one for normal grievances
You will be surprised at how hard you can get copper using a technique called cold hammering. Try it yourself take a piece of copper wire, and a hammer and use just below moderate force tap the copper while simultaneously rolling it while tapping on a hard surface, like a cinderblock or piece of concrete then try to bend the cold hammered copper compared to a normal piece. It’s roughly 10 to 15 times harder. Don’t ask me why just science
Can't be a great video without a stupid complaint.
Looks absolutely amazing... but isn't copper a bit soft? Like almost everything would leave nasty marks on it, wouldn't it?
I think he added tin to the mixture making bronze which has much better hardness than copper alone
@@gabrielhoyer7097 i see. Must've missed that. Makes sense.
@@gabrielhoyer7097 still way to soft for a hatchet TBH
@@ghostoftheUchiha3250 a hatchet is made to cut wood, not stone, and bronze will do the job pretty nicely. Don't underestimate ancient metals, they will work fine, but you will have to maintain them regularly.
@@jeanladoire4141 no shit I don't think bronze would cut anything harder than lead🤣🤣! you have to sharpen a bronze hatchet after every use. do you know what happens when you sharpen something? You're removing material from the tool. it will last about 1/8 the time any normal hatches you buy from harbor freight would. have you ever noticed there aren't any hand-me-down bronze axes are hatchets that have been in use for generations? no. my father still has blacksmithing tools and an axe that has been in my family since the mid-1800s and they're in great condition with very little damage
Отличный паяльник получился. Греешь на плите и паяешь вёдра и радиаторы 😂
Ахаххахахахаха
или засовываешь куда надо и спрашиваешь где бабки лежат
😂😂😂😂
😂
@@olegvolchansk терморектальный криптоанализатор )
Imagine the first person to think of doing this a huge leap, genius.
That’s absolutely astonishingly beautiful work of craftsmanship and art - ❤!!!
So beautiful. Thank you for putting something so lovely out into the world.
Pro tip: Spend a little more time with the hard shaping abrasives before polishing with the rag wheel & compound. The finish will not be as wavy and you won’t telegraph the flaws.
I would love to do that, although you make it look so easy. I bet it takes a little practice and a great teacher to get good.
you're making it harder to fight the urge to steal copper from a construction site
That axe is a beauty. Nice job.
Now I know what they do with stolen phone line cables.
What a work of art. Brilliant skills.
My neighbor: where’d all my copper wiring go?
Me in the backyard with my new forge:
TH-cam shorts are making me want to get into metal working
Not to sell or actually do anything with them
Just to have them because they're shiny
Our crow brains hath spoken and it said go make/find shiny things xD
That's a beautiful axe
Yes🎉
Me making an axe after visiting my local construction site.
"make an axe out of bronze is a bronze age skill" pretty cool actually!
You have to learn us the art of making a core, then you will avoid all drilling afterwards. Great that you show this so that we don't forget that we can make things ourselves without having to go to the store to buy everything. I worked for a year in an iron foundry when I was young.
"Just got this wire from the construction site down the road last night."
Бронза ибо есть цинк в меди а если добавить берилевую бронзу ...в манометрах есть полая пружина...будет очень прочная..
А что это за белый порошок
@@user-ui9pz6hy2w ебу штоли
цинк и медь это латунь.
Borax
Откуда там цинк?
Truly amazing to watch 👍
A cross wedge ? Ooohh boy that looks cool
Love the work you do. So amazing to watch
Que bonita hacha de cobre y bronce, hecha especialmente para el último de los Mohicanos..!! Excelente video..!!
THIS is what the internet is for! Absolutely incredible work!
I want to see the video of where you got the copper wire!
He found it unattended at a construction site :D
@@BiffGheek hahaha😂
I think that might be more of a tomahawk or hatchet, but that’s beside the point- It turned out absolutely gorgeous
Hurt my soul to see you smack it against that log 😂
Ahhh yes, another piece of functioning art! Well done!
I don't know how I've never had the idea (especially when I work with copper myself). I think the idea stemmed from the way he has it bundled at the beginning. But I want to, or want someone to, make small cartoons stile witches brooms out of entirely copper. I just think it would he pretty neat.
It is always interesting what does he put in the beginning besides the metal itself?
Tin (little grey balls) and borax (white powder), added to copper to make bronze.
Beautifully polished end result...it's not hard to see how this alloy was often passed off for Gold in early times.
I see a lot of people that look down on their luck leaving vacant houses with this stuff. Nice to see more people getting into casting!
Dude if i own that axe, I'd probably won't use it! Its beautiful
hii
Copper is a bad choice of metal to male axe from. Because it is not hard as iron or steel. That axe will deform easily.
The axe head was made from bronze, a combination of copper (the wires) and tin (the grey pellets). The ancient Greeks (and others) used it for armour, weapons and statues in the time before steel was invented, and they had no problems with murder and mayhem using bronze. Think of Troy!
You will be surprised at how hard you can get copper using a technique called cold hammering. Try it yourself take a piece of copper wire, and a hammer and use just below moderate force tap the copper while simultaneously rolling it while tapping on a hard surface, like a cinderblock or piece of concrete then try to bend the cold hammered copper compared to a normal piece. It’s roughly 10 to 15 times harder. Don’t ask me why just science
Bro'll be vibing in a zombie apocalypse
Bro, Whatever you make, likes a real gold 😮
As someone whose last name is Bronze, I would be honored to own this axe
Now that is some kick ass shit, good show, you peeked my interest, awesome video, will be waiting for more.
Ironworks is so fascinating. Beautiful axe!
This is what I watch when I am bored at 3 in the morning
For us it’s just a few seconds of beauty
Bot for this man it’s so long and hard job
Please assist him and take 👍🏼 and more comment and share it . Bless you man , so cool ✊🏽
What is the white powder and what looks like a rock that you put in the crucible?
Wow! That copper can make such a beautiful axe
If you cast the mold sideways you can make a plug for the handle instead of drilling, and if you hammer onto the edge before polishing, it will hold a stronger edge
That is clean brother.
Congratulations, you made a level 2 hatchet.
That's definitely the one Mel needed as the Patriot
That was a perfect dirt mold and cast. Excellence work. What was the metal pellets?
Like the shorts but I miss the full length videos
He now knows the way of the Baltic people on how to make one of these axes
How can I learn this trade? This is great work, talented , and I'd love to do this for a hobby
that axe looks so darn purty i wouldn't even want to use it
In the Edo era, Japanese beaches, provided sand for forging the Katanas. Iron ore in the sand and charcoal, created hard edges with flexibility. 11 folds would give you over 2,000 layers. A Japanese soldier, took his inherited blade to a heavy machine gun barrel, sword won.
Japan has quite low-quality iron ore. To be able to work around this, they refine the iron a LOT while forging it.
Could an old (traditional steel, not imported) sword break a machine gun? Probably, especially if it had been firing and was very hot (hot steel is less strong and hard).
But the sword would have been at least slightly damaged and would not have cut through the barrel
Que coisa mais linda em , que trabalho lindo 👏👏👏👏👍 .
I've been listening and watching the "Silver Hawks" cartoon series. This cartoon series doesn't show you characters who communicate with the dead.
It’s stylish, and it works. A win-win.
Rad asf 🤟
I thought it was gonna be a cool ass battle axe but this is awesome too!!!
The black handle rlly puts it together
What were those other metals? Depending on the alloy that may be considered norse gold, which has a hardness far beyond bronze, it's closer to a low carbon steel
Tin and copper
@@kieranhancock3954that was lead fishing weights copper silica and borax
@@austen9556 G you need tin and copper to make bronze, he just adds lead with it as well
BRO IS PREPARING FOR ZOMBIES 💀
Wow, can’t wait to cut 1 singular twig and have that thing become much more noticeably dirty than any regular axe!
That is a gorgeous axe
Exceptionally beautiful.
4456
Rarely regress is filmed so nicely 😂
A medieval style dagger would be cool
Most beautiful axe I've ever seen
What is that powder that you just sprinkled on the red plastic axe and is that red axe head is plastic? I don't know everything about casting but it was pretty fun to watch.
I’m pretty sure it’s bone ash and I think it’s used to make it look shinier
Talcum powder to stop the sides of the mold from sticking together so he can remove the red axe to pour in the copper.
Debe ser el fundente.
And why does he pour some salt and a stone in that cup where he melts the wires?
@@JustRememberWhoYoureWorkingFor the "salt" is borax to act as a flux, the "stone" is a lump of tin that mixes with the copper to make the alloy known as bronze
Axe is now become mirror, what a finishing 😮😮.
Okay now that's a lumber Tycoon 2 axe
That broken mask was hilarious😂😂
Do I need a Bronze Axe? No.
Do I want one? Yes.
beautiful
Great video 👍
That drill really sounded like Donald Duck
unbelievabel satisfying to watch (almost 30 times :))
It’s perfect every single detail ❤
Man there goes $150 of copper right there