Blacksmithing - Forging tools for stone splitting
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2017
- I show how to forge the tools needed to hand drill and split blocks of stone.
Check out my recommended tools/gear:
www.amazon.com/shop/torbjorna...
If you like my videos you can support me at:
/ torbjornahman
.. or buy a T-Shirt here:
www.torbjornahman.se/tshirts
My great-grandfather emigrated from Cornwall to mid-coast Maine (U.S.), where he eventually managed a granite quarry. I've seen the quarry and his old tools. Since there are boulders on my property, I've also done a little stone splitting myself. So these tools and techniques are familiar to me. Good to see someone still practicing these techniques for working metal and stone. Thank you for posting this video -- and reminding me of my great-grandfather.
Very nice! Thank you.
I enjoy seeing tools. The tools are civilization-building. Welfare and comfort are owed to those who made these tools.
@Viking Mike Q bravo
Hello Torbjorn, I have been taking a close look at your work. What I liked most was carving holes in the scale for splitting it with special wedges. This first Rock had a defect and therefore did not break in the intended place. The second one is the quintessence of this type of work.
During my early youth, I helped Mr. Józef a little in the forge. I turned on the double-sided smoke maker, pumping air into the firebox. I also turned the long crank of a large drill. I remember how Mr. Józef stuck heated hoops on the wooden wheels of the cart, and then other people quickly poured water on them. He also made horseshoes from industrial forgings, which he attached to the hooves with studs. It was him and Dad who taught me the technique.
That's why I really appreciate your blacksmith skills.
Congratulations and best regards 💖👋😀.
Great! Thanks
My grandfather was a stone cutter and one of the fondest memories i have was learning how to cut sandstone along side him. Thank you for showcasing the old school technique.
I really wanted to thank you for this video. My grandfather was a rock driller for the railroad that went through the Muskokas of central Ontario. All canadian shield granite. He started when he was 11 years old. Myself, as a child had a hard time picturing this process while hearing it. After watching your video - I got it. And even more respect for my grandfather and those who drilled in the past. Thank you.
Wow, thanks!
@@torbjornahman
Thank YOU!
Imagine an 11 yrs old today working in that now! Those were different times.
As a miner for mineral specimens and crystals, that must split rock with out explosives, this was fascinating to watch.
We often use ling tapered hardened pipe fitters flangewedges to exploit fine cracks in working face to open natural splits up for larger wedges.
Since collectors hate to see drill holes, we want as natural a surface as possible.
Good job on forged tools and splitting the rock.
Thank you for showing us how you do it.
Cool! Thanks
Drill holes can be pitched out.
There is a certain amount of zen, to the way you set up your videos. Not a lot a talking, straight to the point and all business. Greatly appreciate your videos like always.
Thanks
my family owns a monument business and i cant tell you how many times ive had to do this. from anything to a small slant monument to a big block that weighs 3 tons and is about 4 ft high, 4 ft wide and about 10 ft long. just a little tip, put some grease on your wedges before you use them. you wont believe how much of a difference it makes in splitting
This is goob jop
Absolutely *AWESOME* video! Where I live, we have a lot of limestone industry. I have even done some stone carving myself. I have considered trying to forge carving tools some day, but this is the first time I've seen stone cutting tools forged. This is definitely a video that I will be watching again!
Great! Thanks!!
Outstanding video, not only do we get to see the old craft of stone splitting with feathers and wedges but also we get to see how the tools are made. GREAT VIDEO!!
Thank you for the demonstration of stone splitting. Also, your honesty of the first bolix is refreshing Torbjorn. Good day too.
Thanks
Hay mucha gente muy bien.
Of all the smithing channels this is the most relaxing one!
I love your videos Torbjorn. I especially appreciate the fact that you show the finished product before showing how it is made; not many people do that, and it makes the steps much easier to follow when you can see where they're leading.
Thanks. Yes, especially in this case since there are multiple tools involved.
000099₩9
Just the most informative,entertaining and relaxing twenty minutes. My mid morning break was this video and a nice coffee, does not get any better!
I'm a simple man. I see Torbjörn notification, I click and like before watching then I enjoy. Thanks for uploading again.
I love that sound. Chissel to stone. I carve granite . I'm grateful for carbide . I have also used feathers and plugs for splitting. The hardness of the material plays a crucial role in success or failure. Thoroughly enjoyed the video!
They built entire tunnels in Switzerland using this drilling method for dynamite back in the day. What a monster job! Good work 💪
de toda la basura que hay en youtube, estos vídeos si merece la pena mirar
I really like these round trips between the demonstration and the manufacturing ...
Bravo for this video !!
Who the hell thumbed this down! This man has made tools that have built our civilization, fantastic video and smithing thank you TA!
Thank you Jared!
the subject of thumbs down was raised on another channel and apparently, the way YT works, some thumbs down gets you more exposure than all thumbs up.
I was really getting into the rhythm as you were hammering the second time. It was so musical and then the sound of it splitting was perfect. Like a smithing ASMR session
That rock splitting at the end was one of the most satisfying things I've seen or heard so far in my life, thanks for showing me how to do it myself!
Great. Thanks
Be sure to add a splitting chisel on each of the sides as well.
and the forging the tools, that was satisfying af
My late father told me about this quick hardening and tempering process for stone chisels. He still saw blacksmiths make chisels that way in the late 1940's.
This is the first time I see this simple method on the internet.
Thank you very much for sharing your fine craftsmanship.
Most interesting. It gives one renewed respect for the masons of old who constructed the cathedrals and castles we admire so much today.
Thank you. My wife has been baking a lot recently and this should help considerably.
Ha ha ha....
I always approach tasks with greater mindfulness after watching your videos.
Thank goodness for the hammer drill at the end! I enjoy cutting granite with a hand tracer, feathers and wedges but if I had to drill holes by hand using a chisel or star drill, I'd find another hobby. Love my Hilti rotary hammer. Great video, thank you👍
I loved it when you pulled out the drill. Great work. I appreciate it that you don't feel the need to talk, instead you let your actions tell the story.
Keep it up, and Thank you!
I'm a stone mason from Devon, England and I've used this technique before to split a large raw rock of Devon Granite for a headstone - It's called plug and feathering.
Cool, thanks!!
I'm also a stone mason from the USA, we also still use this technique. Good to see someone make a video of it :-)
Here in New England USA we call them feathers and wedges.
@@beatlebomber Please, some of you should make videos about stonemasonry
vic ferg plenty of videos on here of the process to view, also instagram and so on. Did this in a granite quarry as an apprentice using a diesel air compressor and air drills, we could accurately split 20 ton granite blocks down into one ton blocks for a hydraulic guilotine to handle. Finding the grain/reed was the hardest part
Dewalt - the best assistant bricklayer! 😆 💪👌
my man! rocking that relaxed look! i love it. hard work and comfort together at last!
Absolutely impressive work. It is always a pleasure to witness your craftsmanship and ability to turn your creative ideas into real world things.
That's very interesting! Great work man.
No mentira Bro
Ovo je naj stariji,zanat metalske struke.Gold mester.
Ž elim čuti taj dogovor
See, this is why I love this channel. You dont make things that you dont need. Nor do you make everything exotic and Damascus. Although those things are fun to watch, I enjoy your "see a need, fill a need" content. Keep up the good work, sir.
I didn't even know stone splitting was still around, that is so awesome man, like also like how you show how its done 👌🏻
Those old boys in ancient Egypt must have had a few sweaty moments when they were knocking out their obelisks! Big balls required! Fascinating post Torbjorn, thankyou.
That was what we call concrete today if you look inside of broken obelisks and statues you can see the stones used for filler material.
Чае
@@daviddayton774 NOT
You have a lot of what you might call arcane interests. I dig it. Keep sharing the old ways of doing things. Splitting rocks, putting holes in rocks, scythes, sharpening scythes and much much more. I'm on board.
Thanks
Michael Morrow
'''bien'''''filme!!!!ilyadesmoments où l'on entend frapper le
marteaumais surquoi??? On ne levoit pas!!!!!!a deviner !!!!..........
Super sir
The sound a fairly large rock makes when splitting is actually a whole-body experience!
It reverberates through your chest like nothing else!
I really love this style of video no talking just great forging. Also the way you did this is good in my opinion. Showed use of the tools than forging them one by one
I've seen rock work done before but the first time making the tools for it. Great job and video!
Thumbs Up as well
I love this video format! You did a really good job of showing silently I might add :-) what the tool was going to be used for and practical application and then how to form the ends. Great video keep up the awesome work God bless!
Thank you!!
Super cool, I'm a Mason and enjoy seeing how feathers and wedges are hand built, awesome.
Now added " split up a big rock" to my bucket list!
:)
Good luck!
If you ever do it don't forget to tell us
@ianjsutt Hey is this a real offer? Cause if so it's tempting haha. I just want to learn.
@ianjsutt Hey thanks for the reply and the suggestion! I'm a college student in Idaho studying construction and landscaping and am just looking for a job or internship for the summers. Have been binge watching these rock splitting videos and think it would be really valuable to learn since my main interest is in stonework/masonry. I'll definitely look around my area like you said and appreciate the encouragement!
ķ
Amazing metalwork and amazing montage of the video. I love the non-linear action of the video. Thumbs up all the way!
The sound of the stone cracking was so satisfying, haha! The reward of a great deal of work. Great work, as always.
That's definitely an awesome video!!! Not just showing a "how to" but also telling a whole story about the tools. I'm deeply impressed. Chapeau!
Thanks!!
Watching you work does have a calming effect to it............Awesome work man..Thanks for posting
*Thumbs up* For whipping out the Masonry drill bit.
A mix of new and old tech isn't a bad thing.
That being said, I've watched some Japanese stone masons on youtube, split stones, and
they seem to normally put more "wedges" in the stone.. they also seem to tap more lightly..
and go twice as slow as you did in the video.
Nice editing. Fun to see every tool in work and fabrication of the tool 👍
Howdy.
I have done some stone splitting using pieces as shown. Works really well. Yes one should drill holes no more than about 3 inches apart as deep as possible.
One inserts the side bits as follows to avoid then to drop into the hole:
Take the side bits between your fingers and imagine they form a cigarette. Then one inserts the "cigarette" into the hole the "amber" end first. Still holding the "cigarette" between one's fingers one rest one's fingers against the stone. Now it is easy to insert the force wedge into the "cigarette" split. The side bits won't drop into the hole.
Regards.
Watching a clean straight fracture appear like that was quite satisfying.
This is so awesome,that's all you really need to know. Blacksmithing and stone cutting! Great video. Thanks!
Love to watch these kind of videos! Gonna grab a coffee and " watch it again " ! Heheheh
Torbjorn, Thank You for this amazing insight into this wonderful craft. 🙂
figuring out how it was done, by what we can see is very difficult, but this truly seems to be right on point. Nice work Torby!
Maestro ud no es perezoso, lo que ocurre con los que hacemos, los que construimos , tenemos muchos trabajos, que buscamos que rinda el tiempo, y a veces no sale como se planea...y cada detalle , el que sea, suma a nuestra experiencia...y maestro es aquel que ha intentado otras formas de hacer un proceso...gracias por mostrar y demostrar, tanto temple como rotura de rocas, para ver la calidad de las herramientas, que es el objetivo de este gran video...hare krishna
Loved the IKEA commercial TH-cam showed me before watching a Swedish man make some tools.
Life’s little games
19:00 Oh, we've all been there! I love your expedient solution to the problem. Thanks for the laugh and another great video.
I have to make a chisel for myself. A friend gave me a nice anvil recently and I got my forge set up. I'm familiar with basic heat treating -- I make my own spears that stay sharp even after hitting rock. This would be a good first project.
Really like the ancient tools and processes. Thanks for sharing.
Thanks!
I have to watch it again, I got so relaxed I fell asleep.
Same
Same lol
Great presentation. We call it "Feathers and Wedge" splitting. A suggestion for the drill rod. Upset bump the cutting end and forge dress it to a 4 corner star shape with a center point. The upset material in the cutting end will allow deeper drilling without becoming stuck in the hole. Before we had electric hammer drills we used hand forged star drills for anchoring to masonry & stone with lead plugs & screws. I've also seen many bits for cable drill rigs dressed on site with a coke pit, bucking cradle and sledge. That is some serious two fisted hammer work.
Thanks! Yes I have seen the star shaped drills also, but I believe this chisel type were most common here. The beauty with these is that they are so simple. You sharpen/reforge the bit in one heat, then harden and temper in the second heat. The entire process can even be done in one single heat if you're quick...The smiths at the quarries probably could sharpen hundreds of drills each day.
@@torbjornahman Those star shaped drills are surprisingly quick. I use them as a surveyor for placing marks in stone or concrete. They are a lot easier to carry and use than carting an electrric drill around.
Worked in the Vt stone trade for years , good stuff my friend .
🌺💐💐⚘🌹🌹👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻السلام عليكم ورحمه الله شيء جميل جدا وانا اشكرك من اعماق قلبي انت عملت هذه الازميل بنفسك وقمت في المحاوله الاولى ولم تنجح لكنك لم تياس و قمت بالمحاوله الثانيه وكانت ناجحه جدا هذا الفيديو جميل لانه كان واقعي كان بامكانك ان تاتي بالصخره اخرى وتحاول مره اخرى وتقص الفيديو الاول لكن ما اعجبني انك لم تقص الفيديو واستمريت بمحاوله الثانيه في نفس الفيديو هذا لانك صادق وامين وكل الحب والاحترام لك والله انك تستحق المتابعه🌺🌺💐😘😘😘
Again, every minute of the video was a pleasure to watch and for me at this point in time, just the information I need as I will be working with rock. Your unfailing consistency in the quality of your videos amazes me. Thanks.
Thank you very much!
Very informative, I cheated and bought the feathers and wedges, and used the hammer drill, but it still is quite gratifying.
Thanks for sharing.
I really enjoyed how you presented this. Showing the tool in action, then cutting back to making it. Kept it interesting.
The stone chisels and wedges worked fantastically! Your second attempt made a nice even split. Thanks for sharing this!
Yes, I'm glad it worked out in the end... couldn't end with a failure!
watching this video, reminds me when my grandfather taught me how to split stones using same techniques about 30 years ago. I work in construction have not seen any stone mason using this technique anymore. enjoyed watching this video.
Cool. Thanks!
Great Video, Start to finish, I love it.
I like the format, showing the tools being used, and then how you made them. Interesting to see how it was done back in the day. As always, I really enjoy your no nonsense style, just letting the work do all the talking.
Thank you!
I recall doing exactly this same job using exactly the same tools with my grandfather one summer when I was 10 or 11 years old. As a blacksmith, you have an advantage -- my arms and back were sore for a week!
:) I believe you! Thanks
Really interesting technique!
Beautifully done! I love to see the practical application of the things made.
Illuminating video. I just imagined that process being repeated thousands of time just to prepare the material for a cathedral. Mind boggling. Your channel is a treasure
Yes indeed! Thanks
Fascinating video, just shows how many crafts a Smith can make tools for
Great Video, Torbjörn! You always make the coolest videos!
The sound the rock makes when it splits
I wonder why blacksmithing is so relaxing to watch.
You are welcome. I have always been interested in splitting since as a young trainee back in the mid sixties my Dad taught me how to cut a piece of terra- cotta flue pipe to length. Got it on the first try. Patience.
I love the way this video is organized. Showing the tools in use, mixed with forging them is great. Really loving your channel and it makes me miss having access to a smithy!
good video format, continue in the same direction
Just marvelous craftwork - make your own tools and use them - two things most people couldn't do!
Thank you from the old tradition,, that you enherit the knowledge from ancestor ,,and again a new breed will learn the way of art ,,😊
keep the wedges the same pitch! the pitch of the sound they make when you hit them indicates their tension, and it's better to keep even tension when all the holes are the same size :)
Exactly what I was going to say. Also, let the wedges "rest" a little, 10-20 seconds maybe, then hit them to the same pitch again, wait and so on. With a bit more patience the first cut could have worked, I think.
Thanks for not playing loud music.
Heard it called "Plug and Feather" Northeast PA. Bluestone area. Awesome Video, Cool...single heat, water quench harden and temper technique. I always like the harmonics the stone makes as it is about to cleave open. Thankyou ! Subscribed!
Yes, that's right! Thanks!
I am a mason/sculptor and the first time I saw this method in a mason's yard it was impressive as the limestone rough block was about 2m cubed +, but the mason doing it just gently tapped the plugs all around the top and sides and after a few taps poured a bucket of water over it and we went for lunch. An hour later just a few more taps and the perfect split of the stone happened, Water it seems helps to soften it all a little. I have used this method several times in my workshop and it works well, I don't want the use a grinder as the whole place would be covered in thick dust!. Nice forge work in this video as well.
Great! Thank you!
the way the sound changed when hitting the wedges as the rock started to split :-)
:)
You can always tell by the tone when the rock fractures.
it's very interesting, I like the different sounds
It's like sawing through a piece of wood although the tone changes more gradually. It's always easy to hear when you need to start supporting the workpiece when you hear the change in tone.
Joshua Rosen It’s similar to the sound a tree makes at the moment right before it falls. Like a cascade of sound rippling through, almost a tear..
I like how you can hear the sound change when hammering the rock
So awesome! I really enjoyed this. I sure wouldn't mind seeing you make something with the stones!
It always makes my day when you release a new movie. Zen and Torbjorn Ahman.
I am sorry. timestamp 19 minutes 11 seconds I busted out laughing so hard. I really did love the video though I'm telling you that I can't wait until I get my forge finished and I start blacksmithing
-"Screw this, I'll go electric on this mofo !" :D All cred to the assertiveness and patience of the acients
Gives you a profound respect for those that split and quarried stone back in the day, really liked the video format also. GG
Yes indeed! Thanks
Awesome video as always Torbjörn! I really like how you showed the tools in action, followed by you making each tool.
Thanks
Hello Torbjorn, In Canada those tools are called feathers and wedges. Nice job!
Cool. Thanks
4
Thank,s
Thank,s
PLUGS and FEATHERS!
Vengo Por Un Poco De Todo
X2
X3
i really enjoy seeing you use the tools you make.
Got a good laugh when I saw the drill come out! I admire your patience. I would have done the same thing. Really neat technique!
Thanks!