As a very young teen in the 1980s, I had a power line 880 multi-pump. I set up a Target on a pine tree about 50 ft away, pulled the trigger, and caught a BB in the forehead about a half inch above my eye..... Frangibles are great.
@@davepearson2736 No, apparently I had a dead straight line of sight at the target, bounced back and caught me. It left a welt almost as wide as a nickel.
I don't normally like "bling" guns but that EXG does look nice... A bit of advice though: assuming these are of KWC origin and you want to -spoil- shoot them I'd suggest applying a *very thin* layer of dry Moly' lube to the hammer face (use a cotton wool bud / 'Q-tip') and a *very* small amount of wet Moly' to the slide rails on the receiver, assuming of course that the slide is removable. I've got some secondhand KWC guns which didn't have this done and those two locations appear to be particularly prone to wear and applying Moly' seems to help greatly as a protective measure.
Lots of people use 'speed loaders' incorrectly. They assume that because they are called speed loaders people just hammer away on the plunger as fast as they can only to see BBs going everywhere hut into the magazine. If you are gentle and take your time you will get all of the BBs in the right places and will take less time to fill than if you try to fire them in your mag as fast as possible. It's one of those strange things where slow and steady wins the race.
59 ! Jesus that makes me feel better already. Nicely reviewed a lot of " i want one " angles for those three from pistol lovers to John Wick fans and from what i can see a very nice repro. So thumbs up for the Babbayaga from the Bacon and egga. 👍 Dave
@@RandysRides Not going to lie, that's a weird way to do it. A quarter ounce bullet traveling 499 FPS has the same energy as a .25 ACP. It would suck for any distant shooting because of the heavyweight, but up close in a pistol it is absolutely lethal, and I assume that they made that to keep air guns from being very lethal. Is that speed limit for both pistol and rifle?
I have the Beretta PX4. It has the same features minus the extended clip. The Beretta clip is reversible with 8 pellets (or bb's) per side. I also have the Crosman Vigilante revolver, Daisy powerline (bb), and the Crosman american classic. For a rifle, I have the crosman fire...which is insanely accurate.
Just bought the knight viper after watching your excellent review and I love it. You recommended getting a holster to complete the effect, don't suppose you could tell us which one you're using so I can get one ordered?
You can get 3d printed loading aids that slip over the magazine and aid in pulling the follower down to load. For those buying them as movie replicas you may want to consider the airsoft version by EMG as they come with Taran Tactical Trademarks, or the Action Army ones the have both Taran Tactical and STI Trademarks.
I got the Limited Edition 2011JW3 Combat Master (PTP airsoft version) from Taran-Tactical. It is advertised at 370 fps., and is a masterpiece. It sits well with my two other PTP airsoft pistols. ( KWA M1911 Mark 2 PTP and the Taurus Intl. M92 Barreta PTP.) - PTP: Professional Training Pistol , because nothing beats a PTP version.
Good morning Andy,another great review. Who is the manufacturer of these pistols and can we swap the magazines for the short ones. Thanks again for wonderful work
I own a Baba Yaga (which is a STI gun). But, my specimen has no signs, but the caliper and the F sign wich is by law in Germany. BTW, as time wents by the color of the barrel changed. It got a more shiny surface. And the color changed, as if there are inlays of blueish and greenish. Don't know how to describe it. It look beautiful.
Stupid question but can these shoot plastic 6mm bb's? I've seen what appears to be a similar airsoft gun by KLI that can but everywhere else I've seen these specific models shown say 4.5mm. Many thanks
These look awesome for sure! But somehow I never really got myself into these. After owning a WE Hi-Capa 7.0 Black Dragon, with split slide, these quite regular 2011 style pistols do not seem to bring much new for me. I love John Wick movies for sure - but that alone has not made me drooling after these pistol models of his.. Not saying these wouldn't be any good though. Seems nicely made, and surely any (or all) of these might be a fine display item on the movie shelf top..
Ive fancied a pistol for a while but not keen on CO2 but… yup, these seem like pure fun. Im not sure my workshops big enough for the richocets though and I may end up jumping around like John Wick.
I got the original one, fish scale grip, copper barrel. The safety arm snapped when I tried to apply it and the mag kept falling out when I tried to shoot it. Looks good, feels good, but just an expensive paperweight unfortunately :(
Hi Andy. Another great review and footage. They definitely look and no doubt feel like a centre fire 2011. Forget about the nonsense laser being fitted to the under rail, surely that rail is meant for a grenade launcher to be fitted lol. Looking forward to seeing what you’ll be reviewing next.
I love John Wick, I do even own a original movie poster JW4 from my lokal cinema. On the range, I do prefer the H&K P30L, a wonderful gun very precise. 🥰
Which reminds me, I saved up a load of lids from different sized tin cans to make targets llike that, then moved, and put them away in the shed. Time for a little DIY project I think!
Hi Andy, Just thought you should know I had trouble watching you today as I had to search for you as I had no Notification. I usually watch while having breakfast today it is Elevenses. I never miss your videos but TH-cam does not like me watching.
There so expensive though...I hate that ..I want to buy one of these. But I can't afford it. .it's too damn expensive 😞😞😞...close to $ 300.00 for each one of those pistols...I swear ...
Andy a really good video which say,,yeah,,I want one,,pity though,,I'm just about any country except Japan,,you can have the real thing,,,England,,what an in democratic country,,,rgds
These definitely fall into the "I want one category". Thanks Andy for depleting my bank account just a bit more. Cheers from Texas.
Where abouts in texas. West texas here.
@@squirrelatwork W.Texas here too, San Angelo.
Amarillo here. Some distance away
I own the Taran Tactical version and it's a decent bit of kit, it has a nice weight to it and is very accurate too.
As a very young teen in the 1980s, I had a power line 880 multi-pump. I set up a Target on a pine tree about 50 ft away, pulled the trigger, and caught a BB in the forehead about a half inch above my eye.....
Frangibles are great.
We're you holding it backwards?
@@davepearson2736
No, apparently I had a dead straight line of sight at the target, bounced back and caught me. It left a welt almost as wide as a nickel.
beautiful set of pistols
I don't normally like "bling" guns but that EXG does look nice...
A bit of advice though: assuming these are of KWC origin and you want to -spoil- shoot them I'd suggest applying a *very thin* layer of dry Moly' lube to the hammer face (use a cotton wool bud / 'Q-tip') and a *very* small amount of wet Moly' to the slide rails on the receiver, assuming of course that the slide is removable.
I've got some secondhand KWC guns which didn't have this done and those two locations appear to be particularly prone to wear and applying Moly' seems to help greatly as a protective measure.
Lots of people use 'speed loaders' incorrectly.
They assume that because they are called speed loaders people just hammer away on the plunger as fast as they can only to see BBs going everywhere hut into the magazine.
If you are gentle and take your time you will get all of the BBs in the right places and will take less time to fill than if you try to fire them in your mag as fast as possible.
It's one of those strange things where slow and steady wins the race.
They look brilliant fun 😊
Good morning everybody , and our Host Andy ..... have a fantastic day
59 ! Jesus that makes me feel better already.
Nicely reviewed a lot of " i want one " angles for those three from pistol lovers to John Wick fans and from what i can see a very nice repro.
So thumbs up for the Babbayaga from the Bacon and egga. 👍
Dave
Great review Andy.. Love these 🏴👍
We need a pellet high power version xD
Better with the real gun
The problem with that, is that you'd have to have a longer barrel.
Beretta PX4 has 495 fps... Canada's legal cut off for air guns. (499)
@@RandysRides
Not going to lie, that's a weird way to do it.
A quarter ounce bullet traveling 499 FPS has the same energy as a .25 ACP.
It would suck for any distant shooting because of the heavyweight, but up close in a pistol it is absolutely lethal, and I assume that they made that to keep air guns from being very lethal.
Is that speed limit for both pistol and rifle?
Great review of a fun garden plinking, do enjoy the review on this channel.
Great content as alway AAR
I have the Beretta PX4. It has the same features minus the extended clip. The Beretta clip is reversible with 8 pellets (or bb's) per side. I also have the Crosman Vigilante revolver, Daisy powerline (bb), and the Crosman american classic. For a rifle, I have the crosman fire...which is insanely accurate.
Just bought the knight viper after watching your excellent review and I love it. You recommended getting a holster to complete the effect, don't suppose you could tell us which one you're using so I can get one ordered?
You can get 3d printed loading aids that slip over the magazine and aid in pulling the follower down to load. For those buying them as movie replicas you may want to consider the airsoft version by EMG as they come with Taran Tactical Trademarks, or the Action Army ones the have both Taran Tactical and STI Trademarks.
I got the Limited Edition 2011JW3 Combat Master (PTP airsoft version) from Taran-Tactical. It is advertised at 370 fps., and is a masterpiece. It sits well with my two other PTP airsoft pistols. ( KWA M1911 Mark 2 PTP and the Taurus Intl. M92 Barreta PTP.) - PTP: Professional Training Pistol , because nothing beats a PTP version.
Try a PX4 Beretta. 495 fps, blowback, reversible clip, all metal at 1.6 pounds. Totally fun for dueling trees.
Morning Andy, Great review.
So cool thanks
Great review Andy looking forward to seeing you at the NEC in a couple of weeks
Dude Keanu is 59 years old and you just turned into sixties it’s the spirit that age you,just look at Sir Sean Connery he aged well
Good morning Andy,another great review. Who is the manufacturer of these pistols and can we swap the magazines for the short ones.
Thanks again for wonderful work
I own a Baba Yaga (which is a STI gun). But, my specimen has no signs, but the caliper and the F sign wich is by law in Germany. BTW, as time wents by the color of the barrel changed. It got a more shiny surface. And the color changed, as if there are inlays of blueish and greenish. Don't know how to describe it. It look beautiful.
I would have like to have seen the extended magazine in the anodised colour as the shorter variants.
Stupid question but can these shoot plastic 6mm bb's? I've seen what appears to be a similar airsoft gun by KLI that can but everywhere else I've seen these specific models shown say 4.5mm. Many thanks
These look awesome for sure! But somehow I never really got myself into these. After owning a WE Hi-Capa 7.0 Black Dragon, with split slide, these quite regular 2011 style pistols do not seem to bring much new for me. I love John Wick movies for sure - but that alone has not made me drooling after these pistol models of his.. Not saying these wouldn't be any good though. Seems nicely made, and surely any (or all) of these might be a fine display item on the movie shelf top..
I bought the original Baba Yaga and yes top quality. I am going to buy the night viper as my local store has them in.
Can you do another review on the p8
Great video, what hulster did you use for that gun?
Ive fancied a pistol for a while but not keen on CO2 but… yup, these seem like pure fun. Im not sure my workshops big enough for the richocets though and I may end up jumping around like John Wick.
Always enjoy your posts Andy. Usually ends up costing me though.
I love your singing targets, could you give me the dimensions, diameter, material, thickness ❤
Nice review Andy,,,, I want one
The link on the sight you have that has where to get it doesn't ship to the states
they really don't float my boat...look like 'fancy race guns'
I got the original one, fish scale grip, copper barrel. The safety arm snapped when I tried to apply it and the mag kept falling out when I tried to shoot it. Looks good, feels good, but just an expensive paperweight unfortunately :(
You can get them repaired at a gunsmith
Can somebody recommend good silicone based oil (spray or drops)? Would be appreciated
Who makes the babayaga
Hi everyone! One of those it’s „must have” in my collection 🤩🤩🤩🤩
Hi Andy. Another great review and footage. They definitely look and no doubt feel like a centre fire 2011. Forget about the nonsense laser being fitted to the under rail, surely that rail is meant for a grenade launcher to be fitted lol. Looking forward to seeing what you’ll be reviewing next.
Are these pellet or BB guns ?
BB guns
How can we one of these in the U.S.A.?
Next weeks gun review looks nice is it the uragan 2 or 3
I love my night viper and my original Baba Yaga awesome guns And I'm like you Andy with the speed loaders 😊
Nice looking pistol but I don’t like the mag hanging out of the handle.
Will a standard 1911 mag fit on these?
Suns out guns out quite literally 💪 😂
I have a real problem with the "replica" pistols on the market...I cant stop buying them!
These are sharp Andy, no doubt about it.
Thanks again.
Where in Canada can I buy them ?
Always entertaining.
They are beautiful!😢
Why don't they bring out a pellet version?? Nice review though.
I love John Wick, I do even own a original movie poster JW4 from my lokal cinema. On the range, I do prefer the H&K P30L, a wonderful gun very precise. 🥰
Local.
Is there an Air Pistol Automatic .177 with adjustable sights?
You can get a red dot attachment for around 50 bucks
Who makes these please
Krown Land (KLI)
Morning What’s the holster.
the link is in the drop down menu
www.vector-air.co.uk/product-page/gunpany-moulded-multi-fit-pistol-holster-gphr-01
Pistols 🔫 great 👍🏻
From Tennessee,my apologies for missing your cast. Been busy.
Please keep us informed.
Thanks 👍🏼👍👍🏼👍
Cool
Sounded like bell ringing practice
Which reminds me, I saved up a load of lids from different sized tin cans to make targets llike that, then moved, and put them away in the shed. Time for a little DIY project I think!
Link?
No Kikimora? 😕-Basically the EXG with a more 1911 style grip scales and without the rose gold 'bling'.
Nice x3.
Hi Andy, Just thought you should know I had trouble watching you today as I had to search for you as I had no Notification. I usually watch while having breakfast today it is Elevenses. I never miss your videos but TH-cam does not like me watching.
What no free popcorn as well 😅😅😅
Co2 loading is MORE complicated than other pistols.
Goodmorning everyone! Have a nice day!
Morning all, would anyone skipping this review be performing a triple bypass? 😋
There so expensive though...I hate that ..I want to buy one of these. But I can't afford it. .it's too damn expensive 😞😞😞...close to $ 300.00 for each one of those pistols...I swear ...
mmmm gotta get me those lol :)
the mag should be black or gold.
Hi all from a wet Devon uk
hello from a wet Yorkshire
😮 my name
👍👍👍👍👍👍
Get a drum mag and turn it full auto
Make no mistake, Baba Yaga is female, baba means woman (of non-aristocratic origins) in fact
I don't think that Reeves has that much youth as he must be in his mid 40's now?
Ha ha , he’ 59! …..but he’s wearing better than me. stay safe
👌👌👌
Another Friday 🎉
Andy a really good video which say,,yeah,,I want one,,pity though,,I'm just about any country except Japan,,you can have the real thing,,,England,,what an in democratic country,,,rgds
Μπράβο αλλά πολύ αδύναμα αυτά τα πιστόλια
😀🔫
1