I just picked up YN622C TX because it has the LCD screen that allows me to make adjustments rather than just the YN622C which I would have to go into my menu on Canon 6D every time I want to make an adjustment. On the 6D it would take me a few steps into the menu which I don't like.
Thank you for the rapid delivery of the data. This lovely video is almost over 3 years old. Would you be able to post a new video with newer models if possible please.Thank you.
Hi!i have yongnuo yn685 which has inbuild receiver and 622c tx which is transmittor only when i change power of flash from 622 it does not show on my 685 and also i cant use ttl mode in r slave mode
The beam is not firing on my Canon EOS RP. The beam assist is set to Enabled on the camera and the trigger/controller are on the camera didn't work. What do recommend?
YN622C-TX and YN622C are not changing any settings on my YN568EX II. I was working fine a few days ago but suddenly I was not able to control any setting remotely. It still fires the flash though. Any clue?
I have a canon and nikon yn568ex flash. I use a Canon camera and now I wonder if I could meddle canon and nikon flash in a slave mode. I'd buy yn622c transmitter. One yn622c reciver and one yn622n reciver. Will it work?
Thank you for your nice tutorial. I have this question , my YN622CTX can control my flash in canon brand , I mean 430ex2 but can not have any control on flash power or zoon on YN5604 , just as a trigger for flash, similar a simple slave flash. Is there any problem in transmitter or flash ?
Is it possible to fire a unleashed YN568EX II with YN622C II on the Canon EOS 50D? Is there an option that I don't need a second YN622C II with my YN568EX II?
Lovely informative video. I have a Canon 500d & Youngnou 568exii ETTL speed lite. I want to use the speed lite off camera. Do I need 2 of yn622c or one yn622c & a yn622 tx also ?
Sorry that this is two years later, but I just bought these myself and am learning how to use them. You go either way, but the benefit of the YN622TX is that you can change the flash settings on the transmitter. Using two YN622Cs, you'd have to change settings in the camera menu or on the flash itself.
hello, a have a problem. I have same engins bu for Nikon. (d5200 & yn622n TX on it + yn568ex & yn622n on it). It seems like working but i cant be really sure. The light goes on but with alleatory firing. Actually, as well in ITTL as well in manual, speedlight has its own settings and yn622n TX has its own's, so can't modify anything (apart zoom) from yn622n TX o the speedlight. I m not a noob ;) the story with chanels and groups are ok.
I have a YN622NTX on my Nikon D750 and my YN622 with my my YN568EX won't change power when on manual are my setting wrong or bad transmitter ? Thank you.
I can't seem to control settings on my YN560-III Speedlite (with YN622C II attached) with my YN622C-TX - Its fires the flash but I can NOT change the settings with the trigger - even though I can on my YN685 with YN622C? please suggest
Hi. Question: can use YN622c attached to my 70D to have my camera control 3 YN660 flashes ? I order that 2 flashes will be controlled by the camera in regards to exposure and the 3rd flash I want it in manual. Or if not, what would you suggest. Thanks.
Hi everyone. I have One yn 600ex rt, and one 568 iii. I have one yn 622c and one yn 622c tx. Is it possible that i can fire the two flashes off cam simultaneously or do i have to get another yn 622c trigger? Pls help..thanks.
Hello there. Are these guys /YN622C-TX and YN622C/ will work with the 5D Mark 2 ? And what speedlights do I need to have to get all the options like I-TTL and HSS ? Thanks. Great video.
Hello, I'm tring to use two YN622C-TX to fire my Alien Bees Einstein light. I have one unit on my camera's hot shoe and another connected to my Einstein light. I've tried both a PC to 3.5mm cable AND a 2.5mm cable to a 3.5mm cable from the 2nd YN622C-TX to the einstein and I cannot get it to work. I finally got it fire the flash but it was waaaay off sync with my shutter on my camera! I would fire a shot on my camera and the flash would fire like literally 1 second after!!! Please Help if you can! Thanks!
I have a yn622ctx and a yn622cII transceiver and I’m having trouble trying to communicate with buttons on my canon 580exII and yn560Iv flash any suggestions?
Thanks for this feature , i have a bit problem maybe you can help me . I have two yongnuo flashes which are yn568ex and yn568ex2 and i wish to buy a transmitter for them , is there another one new one for them ? Maybe upright standing instead of horizontally level ? Only for canon use . Should i really need triggers with these flashes because as I know they are build with triggers on there own ? Also i wish to change a door on one of them because it was defected since i bought it and not closing quit good do you know from where I can buy parts please ? Thanks for your kindness
I have this trigger along with the transmitter and have an issue. The transmitter triggers the flash just fine but when i try to alter a setting from the transmitter, it has no effect and i have to adjust the flash manually. Can someone help?
Does anyone know if you are using the Yongnuo 622TX as a remote trigger on the camera work with a Yongnuo RF 603 trigger ( in hand ) to trigger the remote capabilities or do i need another 622? I just wasn't sure if they used the same rf signal
HI there I have a Canon6d I have a on camera flash with the controller connected to it with a cable, but it do not want to trigger the other flash that is connected to the receiver. Please help
Hi. I just purchased a YN 622C TX and YN568 II mounted on a YN 622C. i can control everything using the YN 622C TX except the zoom on the YN 568 II. Is there any setting on the YN622C TX that im missing to control the Zoom on the 568 II? Help please! Thanks very much!
+jenn a Keep the bounce card on the flash slide inside. With the bounce card on the flash, it will not allow you to remotely control the zoom on the flash.
My question to you or anyone one the board. I have the YN-622N-TX, and I own Nikon SB800 and Aperlite YH-700N . I have the camera set at TTL, but I’m unable to make any changes to the Aperlite YH-700N flash while in TTL, why. Can someone help me out please?
+Rui Silva Not really. A major difference, though, is that you can't use a battery pack with the YN685. If that's important to you then the YN600EX-RT is the way to go. Will be testing the YN685 tomorrow as I just got my hands on one.
I have the YN622C-TX and the YN600EX-RT and I can't connect the two. I purchased the YN600EX-RT specifically because I didn't want to have to purchase/connect/power a separate remote receiver on my remote flash. With both units set to the same channel they never connect. This is very disappointing.
+Keith Luke The YN622C-TX is designed to work with the YN622C trigger/transceivers and is not compatible with the internal radio signal of any version of the 600-EX-RT Speedlite. You will need either the YN622C trigger/transceivers, Yongnuo's YN-E3-RT transmitter, or Canon's own ST-E3-RT transmitter.
+denysost if you're shooting with more than 1 flash, YN622C-TX has a LCD screen to control all flashes. but if you have only 1 flash, you dont need TX model, you can use one 622C on your camera and one on your flash.
+denysost The YN622C is a trigger/transceiver, which means it can be used as a transmitter or a receiver. The YN622C-TX is a transmitter/controller only. When you're using more than one flash the convenience of the YN622C-TX lies in the fact that it has an interface you can control the settings on your flashes from without having to dive into your camera menu or going to each flash separately to change settings. Hope this helps, bud.
Andrey Shamilov channels are typically used to separate triggers. Just in case another photographer has the same remote triggers, you can agree to be on different channels so that you don't fire off each others' speedlights!
I have a Canon T5i and YN568EX II, and I just received the YN622C-TX and YN622C. The HSS is not working right not matter what I do. I have the controller on my camera. I made sure that the controller has the HSS symbol, the flash has the HSS symbol, and that my camera is set to HSS (which it automatically does). Any thoughts as to why HSS won’t work with the controller attached?
+anghelov I know this might be a stupid question but did you have the YN622C trigger/transceiver attached to your flash, and was it turned on if it was? I only ask because when you described your problem you didn't mention the transceiver at all. The YN622C-TX controller/transmitter can't communicate with the YN568EX-II Speedlite without it.
+Bill Meacham hey ,I just got my set same as yours. I am getting it though , but one thing to make sure with you. when I am changing my power setting on YN622N-TX wirelessly My flash light (YN568EX) is not changing the power. Plese help me , I have read all the papers but i got no help :( Do you thing i have to update the TX online first?
I have this same set up for nikon - YN622n-TX on camera, YN622N on flash, flash YN568EX. When I have channel one and group one. I cannot see my flash output changes in manual mode. My zoom head changes the flash fine, but when flash is set to manual it doesn't change when I change the setting on the TX. (TX mode also manual for C.1 - G.1)The flash also shows me the HS symbol with lighting bolt. Why can't I change the power output to flash in manual mode? Thanks so much. When I have the TX on Manual, and the flash on iTTL, the exposure does seem to change and seems to work, but in the videos, the flash is set to manual mode and out on display of flash changes, Hmmmmmmm
The high speed sync doesn't work at all. I have yn-622c and yn622c-tx and the yn568ex ii. The flash is ok but the transmitter and receiver can't fire the flash at shutter speed 1/250 or above.
+completelystupid87 Dude, try updating the software on the yn622c-tx. Just google yn622c-tx firmware update. It solved the "HSS not working" issue on my 650d aka t4i.
Agreed but even some of the more-well-known systems sacrifice that.....pocket wizard, micro, etc...... I guess they figure once you're triggering, you're probably off-camera.
you can attach a transceiver (not the controller) to the shoe on the camera and mount a flash ono the transceiver and still trigger other flashes using the flash as a master
I just picked up YN622C TX because it has the LCD screen that allows me to make adjustments rather than just the YN622C which I would have to go into my menu on Canon 6D every time I want to make an adjustment. On the 6D it would take me a few steps into the menu which I don't like.
Thank you for the rapid delivery of the data. This lovely video is almost over 3 years old. Would you be able to post a new video with newer models if possible please.Thank you.
The yn622 can't remote directly with receiver inside flash?
Can I use the YN-622C-TX on YN565EX II and YN560-lll and a YN560lV?
Hi!i have yongnuo yn685 which has inbuild receiver and 622c tx which is transmittor only when i change power of flash from 622 it does not show on my 685 and also i cant use ttl mode in r slave mode
How's the Yongnuo YN-622C-TX in special offer at Geekbuying for $35?
Finally, Yongnuo put a 622 transceiver in the 685 speedlite. No more need for the extra cumbersome receivers.
The beam is not firing on my Canon EOS RP. The beam assist is set to Enabled on the camera and the trigger/controller are on the camera didn't work. What do recommend?
YN622C-TX and YN622C are not changing any settings on my YN568EX II. I was working fine a few days ago but suddenly I was not able to control any setting remotely. It still fires the flash though. Any clue?
I have a canon and nikon yn568ex flash. I use a Canon camera and now I wonder if I could meddle canon and nikon flash in a slave mode. I'd buy yn622c transmitter. One yn622c reciver and one yn622n reciver. Will it work?
Will yn568ex iii and the yn560 tx pro work together? I have the yn 622c receiver and transmitter
Thank you for your nice tutorial.
I have this question , my YN622CTX can control my flash in canon brand , I mean 430ex2 but can not have any control on flash power or zoon on YN5604 , just as a trigger for flash, similar a simple slave flash.
Is there any problem in transmitter or flash ?
I have YN568EX and YN560-III. Are they compatible with this model?
You have showed in this video other flashes of YN , but not 560 mark 4.
Does it work with YN622ctx ?
Thank you in advanced
Is it possible to fire a unleashed YN568EX II with YN622C II on the Canon EOS 50D? Is there an option that I don't need a second YN622C II with my YN568EX II?
thanks. What's the difference between la 622 mark I and mark II?
Lovely informative video. I have a Canon 500d & Youngnou 568exii ETTL speed lite. I want to use the speed lite off camera. Do I need 2 of yn622c or one yn622c & a yn622 tx also ?
Sorry that this is two years later, but I just bought these myself and am learning how to use them. You go either way, but the benefit of the YN622TX is that you can change the flash settings on the transmitter. Using two YN622Cs, you'd have to change settings in the camera menu or on the flash itself.
I also would like to know if i can I use the YN-622C-TX on YN560-ll and a YN560lV
Will YN-622C Wireless work on YN560-III ?
hello, a have a problem. I have same engins bu for Nikon. (d5200 & yn622n TX on it + yn568ex & yn622n on it). It seems like working but i cant be really sure. The light goes on but with alleatory firing. Actually, as well in ITTL as well in manual, speedlight has its own settings and yn622n TX has its own's, so can't modify anything (apart zoom) from yn622n TX o the speedlight.
I m not a noob ;) the story with chanels and groups are ok.
I have a YN622NTX on my Nikon D750 and my YN622 with my my YN568EX won't change power when on manual are my setting wrong or bad transmitter ?
Thank you.
one question how to I trigger yn568exII externally from yn560-tx
I can't seem to control settings on my YN560-III Speedlite (with YN622C II attached) with my YN622C-TX - Its fires the flash but I can NOT change the settings with the trigger - even though I can on my YN685 with YN622C? please suggest
whats the difference of YN622c TX and YN560 TX?
Can you do a video on how to use the 622C TX with the 560iv flashes which have their own receivers in built?
Hi. Question: can use YN622c attached to my 70D to have my camera control 3 YN660 flashes ? I order that 2 flashes will be controlled by the camera in regards to exposure and the 3rd flash I want it in manual. Or if not, what would you suggest. Thanks.
I would like for you to review the Yongnuo YN 685 speedlite with the built in receivers for the 622C transmitter and the 603 xmitter.
Hi,
I have Canon 6D and Canon 430EX II. How can I trigger it and control it off the camera?
What shall I buy?
Hey Zi, are these flashes compatible with Canon 70D ?..60D is in the list, why not 70D
Hi everyone. I have One yn 600ex rt, and one 568 iii. I have one yn 622c and one yn 622c tx. Is it possible that i can fire the two flashes off cam simultaneously or do i have to get another yn 622c trigger? Pls help..thanks.
hi .. I wanna know if I can trigger an off camera 568 ex ii unit to fire on hss mode by having a 568exii as on camera master flash.
Hello there. Are these guys /YN622C-TX and YN622C/ will work with the 5D Mark 2 ? And what speedlights do I need to have to get all the options like I-TTL and HSS ? Thanks. Great video.
Can I use 2 pieces of YN565EX II for the same sistem /2 off camera set/ ?
Does it work with canon speed-lite 580 ex2 and 600DR on the same time? Does need a long time to be full and fire again ???
Hi I wanted know if you can use the controller of shoe and to trigger yognuo flash speedlights without the trigger units?
Thanks for your review. Can the yn-662c work with the new yn-622c II ?
THIS TRIGGER AND TRANSCEIVER i CAN USE ANY FLASH MODEL OR ONLY WORK WITH YONGNUO FLASH?
Hello, I'm tring to use two YN622C-TX to fire my Alien Bees Einstein light. I have one unit on my camera's hot shoe and another connected to my Einstein light. I've tried both a PC to 3.5mm cable AND a 2.5mm cable to a 3.5mm cable from the 2nd YN622C-TX to the einstein and I cannot get it to work. I finally got it fire the flash but it was waaaay off sync with my shutter on my camera! I would fire a shot on my camera and the flash would fire like literally 1 second after!!! Please Help if you can! Thanks!
Will they work on a Canon 580ex (first generation)?
Can you do a update video on the 622ctx and the 622c receivers
Hi, is this system compatible with the rf603 & rf603ii transmitters? Can they work together probably in manual mode? Thanks
Is this set gonna work with Canon 5D Mark 2 body ???
Thanks great demo
If I just had the 560iv, instead of the 565ex, could I do high speed sync
Yongnuo YN-622C-TX directly work with Yongnuo 622exrt flashgun ?????
Can a newer version, yn 622c II be controlled by yn 622c TX?
I am super confused. I have Canon m3, and YN600EX-RT. What do I need to get to do on camera flash and off camera flash?
I have a yn622ctx and a yn622cII transceiver and I’m having trouble trying to communicate with buttons on my canon 580exII and yn560Iv flash any suggestions?
Hi can I download a pdf manual for YN568EX II thanks
Thanks for this feature , i have a bit problem maybe you can help me . I have two yongnuo flashes which are yn568ex and yn568ex2 and i wish to buy a transmitter for them , is there another one new one for them ? Maybe upright standing instead of horizontally level ? Only for canon use . Should i really need triggers with these flashes because as I know they are build with triggers on there own ? Also i wish to change a door on one of them because it was defected since i bought it and not closing quit good do you know from where I can buy parts please ? Thanks for your kindness
Tengo un YN568ex lll montado en un tripode necesito YN622N y YN622TX o puedo prescindir de YN622N
I have this trigger along with the transmitter and have an issue. The transmitter triggers the flash just fine but when i try to alter a setting from the transmitter, it has no effect and i have to adjust the flash manually. Can someone help?
Do you know if the 622tx will fire the yn600ex rt without a 622 receiver?
Does anyone know if you are using the Yongnuo 622TX as a remote trigger on the camera work with a Yongnuo RF 603 trigger ( in hand ) to trigger the remote capabilities or do i need another 622? I just wasn't sure if they used the same rf signal
HI there I have a Canon6d I have a on camera flash with the controller connected to it with a cable, but it do not want to trigger the other flash that is connected to the receiver. Please help
will it work with canon 430ex ii speedlight?
Hi. I just purchased a YN 622C TX and YN568 II mounted on a YN 622C. i can control everything using the YN 622C TX except the zoom on the YN 568 II. Is there any setting on the YN622C TX that im missing to control the Zoom on the 568 II? Help please! Thanks very much!
+jenn a Keep the bounce card on the flash slide inside. With the bounce card on the flash, it will not allow you to remotely control the zoom on the flash.
Still doesn't work :-( can't control the flash zoom off camera with the YN 622C- TX
Hi, does it allow you to fire these flashes in live view?
Can I use the YN -622C TX on YN560II?
My question to you or anyone one the board. I have the YN-622N-TX, and I own Nikon SB800 and Aperlite YH-700N . I have the camera set at TTL, but I’m unable to make any changes to the Aperlite YH-700N flash while in TTL, why. Can someone help me out please?
My flashes just wont fire. Have 2 565EX II on 622C's with one 622C-TX on Camera. Test works fine, but when I hit the trigger, they just stay dark :-(
Will the YN-622C work with the YN-622N
Can you review Yongnuo 685? Is it much better then YN600EX-RT?
Regards
+Rui Silva Not really. A major difference, though, is that you can't use a battery pack with the YN685. If that's important to you then the YN600EX-RT is the way to go. Will be testing the YN685 tomorrow as I just got my hands on one.
I have the YN622C-TX and the YN600EX-RT and I can't connect the two. I purchased the YN600EX-RT specifically because I didn't want to have to purchase/connect/power a separate remote receiver on my remote flash. With both units set to the same channel they never connect. This is very disappointing.
+Keith Luke The YN622C-TX is designed to work with the YN622C trigger/transceivers and is not compatible with the internal radio signal of any version of the 600-EX-RT Speedlite. You will need either the YN622C trigger/transceivers, Yongnuo's YN-E3-RT transmitter, or Canon's own ST-E3-RT transmitter.
Jason Bodden I went with the YN622C transmitter - thank you for your response.
Keith Luke Great. You're welcome. Let me know how it works. I'm about to purchase that same transmitter on Monday :)
HI YN568EX 11 WILL IT WORK WITH A CANON 80 D
could you please clarify the difference between yongnuo YN 622C and yongnuo YN 622C-TX... it is very unclear to me... thx.. do both
+denysost if you're shooting with more than 1 flash, YN622C-TX has a LCD screen to control all flashes. but if you have only 1 flash, you dont need TX model, you can use one 622C on your camera and one on your flash.
+denysost The YN622C is a trigger/transceiver, which means it can be used as a transmitter or a receiver. The YN622C-TX is a transmitter/controller only. When you're using more than one flash the convenience of the YN622C-TX lies in the fact that it has an interface you can control the settings on your flashes from without having to dive into your camera menu or going to each flash separately to change settings. Hope this helps, bud.
Everybody talked about groups, but what are channels for?
How does it work?
Andrey Shamilov channels are typically used to separate triggers. Just in case another photographer has the same remote triggers, you can agree to be on different channels so that you don't fire off each others' speedlights!
I have a 565 EX and can't seem to remotely change settings but it will fire. Is this common? Or do I need to set up something else?
I do have the same issue! when i change settings on YN622n-TX doesn't change on 565EX! this flash is difficult to deal with!
I have a Canon T5i and YN568EX II, and I just received the YN622C-TX and YN622C. The HSS is not working right not matter what I do. I have the controller on my camera. I made sure that the controller has the HSS symbol, the flash has the HSS symbol, and that my camera is set to HSS (which it automatically does). Any thoughts as to why HSS won’t work with the controller attached?
+anghelov I know this might be a stupid question but did you have the YN622C trigger/transceiver attached to your flash, and was it turned on if it was? I only ask because when you described your problem you didn't mention the transceiver at all. The YN622C-TX controller/transmitter can't communicate with the YN568EX-II Speedlite without it.
+Jason Bodden I returned it and I got a new one. They work fine now. Thanks!
anghelov Awesome :)
Hello I have a Nikon Camera (D 610) I am looking for the same set . but i would like to have a yongnuo ittl, hss flash, Please help me .
+Bill Meacham hey ,I just got my set same as yours. I am getting it though , but one thing to make sure with you. when I am changing my power setting on YN622N-TX wirelessly My flash light (YN568EX) is not changing the power. Plese help me , I have read all the papers but i got no help :(
Do you thing i have to update the TX online first?
I have this same set up for nikon - YN622n-TX on camera, YN622N on flash, flash YN568EX. When I have channel one and group one. I cannot see my flash output changes in manual mode. My zoom head changes the flash fine, but when flash is set to manual it doesn't change when I change the setting on the TX. (TX mode also manual for C.1 - G.1)The flash also shows me the HS symbol with lighting bolt. Why can't I change the power output to flash in manual mode? Thanks so much.
When I have the TX on Manual, and the flash on iTTL, the exposure does seem to change and seems to work, but in the videos, the flash is set to manual mode and out on display of flash changes, Hmmmmmmm
any development regarding your issue? I also have the same!
Good video. Thanks!
The high speed sync doesn't work at all. I have yn-622c and yn622c-tx and the yn568ex ii. The flash is ok but the transmitter and receiver can't fire the flash at shutter speed 1/250 or above.
try changing for a new unit... sometimes these products have bugs
+completelystupid87 Dude, try updating the software on the yn622c-tx. Just google yn622c-tx firmware update. It solved the "HSS not working" issue on my 650d aka t4i.
Do they work with a 5D mk111
+Denise Cauchi Yes on 5D mk111 and 6D.
yn-622c-tx use sync cable not working，what is the problem？use wireless working.
02 SHU ON/OFF try already oso same.
the flash is not working. I did everything. I have only one flash
grazie :)
Nice
very useful video - thanks. Nice accent... Scottish?
The negative for this TX is that you cant have a On-Camera flash
Agreed but even some of the more-well-known systems sacrifice that.....pocket wizard, micro, etc...... I guess they figure once you're triggering, you're probably off-camera.
you can attach a transceiver (not the controller) to the shoe on the camera and mount a flash ono the transceiver and still trigger other flashes using the flash as a master
Could you still use the controller in this situation like if you set it up on a light stand?
Will yn568ex iii and the yn560 tx pro work together? I have the yn 622c receiver and transmitter