Turbo Nozzle is popular in pressure washing but is it good to use for your business? Get in the How To Wash Course Here: bit.ly/HowToWash101 Join the Inner Circle Here: bit.ly/PWIC21
It's not overrated in Florida. Most homes have brick pavers for driveway and pool decks. It's the only way to blow out the dirt, mold, and weeds stuck in the cracks. Surface cleaner won't get the really hard stuff if it's very gunky.
If you use the correct tips on your surface cleaner, it works fine in my opinion. Never HAD to use my turbo nozzle that i spent $75 on lol oh well, I'm sure I will eventually
I absolutely love my turbo nozzle! I use it on brick steps and curbs. I have also used it on big stone statues in cemeterys with great success. Had one that was completely covered in barnacles and it knocked it right off. But you definitely need to be careful!!!
I bought one and your right. The only thing I have used it is on our lawn mower decks to clean off grass we can't scrape off. We got it to clean off oil on equipment we want to rebuild and paint.
Good stuff! I never used one yet but may get one just in case. Happy New Year! Excited about Washcon. I am catching Inner Circle calls on playback. Took a wage job at restaurant & kitchen manager knows I have business come Spring. Life is good! This is the greater reset;) Happy New Year!
Only use turbos for curb cleaning so I don't get sprayback on the corners. Otherwise just as a last ditch on baked on grease in dumpster pads. Most of the time a 40 degree tip gives the fastest and most consistent even cleaning of curbs
@ 2:08 "The problem with turbo nozzle is it is so high pressure" Turbo nozzles come in a variety of orifice sizes, such as 030, 040, etc. Use the orifice size depending on the pressure that your washer generates and you have good cleaning capability. Too large and you don't have enough pressure, too small, and you have too much pressure. @ 3:11 "They start at 50 bucks" Bought mine for $13 (Yes $13, it's not a typo). Typically they sell for around $20. @ 3:42 " ...... it may cause more damage than you think" Not knowing what size of orifice to use does the damage. Problem is sellers typically don't mention orifice size in their listing when selling these nozzles and tips.
big turbo nozzles are rated to 6,000 psi, for example the 8GPM , 8.0 orifice ones typically are. But, most pressure washers are 3500 psi, like mine, so that's the max pressure you won't be getting 6,000 unless your washer goes that high
i used to clean frac tanks from the inside and honestly the turbo tip would save my life because it would be so dirty in there i would recommend for that type of use but if you want to wash a car dont use it haha itll chip the paint
Dude, sorry, but for me the turbo nozzle is a great tool. I know it will blast things away, but you must know and understand the application for it. Everything is a potential desastre in pressure washing if you just don't know what you're doing 😅😅😅😅😅😅 I have seen more people ruining siding regula green and yellow tips or messing up badly driveway with surface Washers than anything else.
You wrong about turbo nozzle I been run pressure washing business over 10 yrs and that what I use on everything. . You just got know how to pressure wash. I never had any complains. Yea if you hold it right on the spot. Yes mine I can put holes in the siding . Got know how to use it
any tip can cause dammage gotta know how to use it and when. Same gos for not everyone should evan try po powerwash ANYTHING. So i think you are so wrong poncho
Got an old rusty partly painted angle boom for a lattice crane that needs to be turbo nozzled. Looking for one that will blow rusty welds off the boom so we know what needs to be rewelded etc. Not a fan of sandblasting stfu about sand blasting people. No one wants to sand blast.
![[Watch Party] RoV Pro League 2024 Winter | with Moowan ( Bacon Time Vs Talon )](http://i.ytimg.com/vi/CCEDhu6dPN8/mqdefault.jpg)
Turbo Nozzle is popular in pressure washing but is it good to use for your business?
Get in the How To Wash Course Here: bit.ly/HowToWash101
Join the Inner Circle Here: bit.ly/PWIC21
I use mine today on two rugs that the new puppy peed on! I stayed way back! 🤪
It's not overrated in Florida. Most homes have brick pavers for driveway and pool decks. It's the only way to blow out the dirt, mold, and weeds stuck in the cracks. Surface cleaner won't get the really hard stuff if it's very gunky.
If you use the correct tips on your surface cleaner, it works fine in my opinion. Never HAD to use my turbo nozzle that i spent $75 on lol oh well, I'm sure I will eventually
@@cashen7384 def prefer a turbo nozzle for moss and weeds in cracks of pavers
I actually prefer it too nowadays. It knocks the lichen & mud off much faster for sure
I absolutely love my turbo nozzle! I use it on brick steps and curbs. I have also used it on big stone statues in cemeterys with great success. Had one that was completely covered in barnacles and it knocked it right off. But you definitely need to be careful!!!
I use the hell out of my turbo nozzle
I just back off a bit ...lean in on it when i really need it but i stay a foot away or so and knock out a wide pattern
I bought one and your right. The only thing I have used it is on our lawn mower decks to clean off grass we can't scrape off. We got it to clean off oil on equipment we want to rebuild and paint.
$50 for a turbo nozzle...Were you been..They have them from $12 to hundreds of them to choose from for $20
high speed high pressure. good material and engineering makes a massive difference. ✌🏻
Good stuff! I never used one yet but may get one just in case. Happy New Year! Excited about Washcon. I am catching Inner Circle calls on playback. Took a wage job at restaurant & kitchen manager knows I have business come Spring. Life is good! This is the greater reset;) Happy New Year!
Love mine. But be very careful. Only use it on very bad masonry
I use a turbo nozzle on split faced block to clean excess mortar
Only use turbos for curb cleaning so I don't get sprayback on the corners. Otherwise just as a last ditch on baked on grease in dumpster pads. Most of the time a 40 degree tip gives the fastest and most consistent even cleaning of curbs
Paver sealing is where you need them. When you re/sand it’s a must
@ 2:08 "The problem with turbo nozzle is it is so high pressure"
Turbo nozzles come in a variety of orifice sizes, such as 030, 040, etc. Use the orifice size depending on the pressure that your washer generates and you have good cleaning capability. Too large and you don't have enough pressure, too small, and you have too much pressure.
@ 3:11 "They start at 50 bucks"
Bought mine for $13 (Yes $13, it's not a typo). Typically they sell for around $20.
@ 3:42 " ...... it may cause more damage than you think"
Not knowing what size of orifice to use does the damage. Problem is sellers typically don't mention orifice size in their listing when selling these nozzles and tips.
big turbo nozzles are rated to 6,000 psi, for example the 8GPM , 8.0 orifice ones typically are. But, most pressure washers are 3500 psi, like mine, so that's the max pressure you won't be getting 6,000 unless your washer goes that high
Turbo nozzle works great on street curbs...you can't damage them.
Is it just me, or is this guy the Dave Ramsey of Pressure Washing.. just close your eyes and listen lmao
Like the new intro bro. Love the content.
i used to clean frac tanks from the inside and honestly the turbo tip would save my life because it would be so dirty in there i would recommend for that type of use but if you want to wash a car dont use it haha itll chip the paint
Happy new year my brother. Great content 👊
Use it as a weed eater between concrete spacers
What about gum on sidewalks
Come on Freddie. Just admit it, u think ur too good for that turbeeeeeeeee nozzle 😆 🤣 😂 😹 😆 🤣 😂 love the videos
ahah turbee tip.
What brand/model turbo nozzle lasts and performs well??
Dude, sorry, but for me the turbo nozzle is a great tool. I know it will blast things away, but you must know and understand the application for it. Everything is a potential desastre in pressure washing if you just don't know what you're doing 😅😅😅😅😅😅 I have seen more people ruining siding regula green and yellow tips or messing up badly driveway with surface Washers than anything else.
I disagree. It depends on the application - similar to a condom
Never heard of her.
@@AaronsLeanMeanAcademy 🤣 touche'
What is the cost for the: How To Wash Course ?
bit.ly/HowToWash101
@@AaronsLeanMeanAcademy Do i have to sign up for nowing the cost ??
@@michaelhald1222 ?
Its no price on the presentation
@@AaronsLeanMeanAcademy
You wrong about turbo nozzle I been run pressure washing business over 10 yrs and that what I use on everything. . You just got know how to pressure wash. I never had any complains. Yea if you hold it right on the spot. Yes mine I can put holes in the siding . Got know how to use it
It's not over rated
Everyone i see roof cleaning uses it?
Rip shingles and any insurance that covers their roof.
Were you in the military?
any tip can cause dammage gotta know how to use it and when. Same gos for not everyone should evan try po powerwash ANYTHING. So i think you are so wrong poncho
Starting at $50? Where you shopping, fella? Just bought one on Amazon for $30.
You’ll find out what quality you bought too.
🏆🏆🏆🏆
Get to the point for god sake.
🎉
Got an old rusty partly painted angle boom for a lattice crane that needs to be turbo nozzled. Looking for one that will blow rusty welds off the boom so we know what needs to be rewelded etc. Not a fan of sandblasting stfu about sand blasting people. No one wants to sand blast.
Honestly dustless is prob best. But a turbi would prob work.