HEY! If anyone needs a quick and easy way to make the blade-width shim, here's a quick and easy way that's ACCURATE! th-cam.com/video/nsw5qlrdx2A/w-d-xo.html
A nice, elegant use of direct measurement to size the pieces correctly. Use of the shim is a plus and the step I've been missing. I gotta make me one of those! richard -- “Everything that needs to be said has already been said. But since no one was listening, everything must be said again.” - André Gide
You are incredibly talented AND have a knack of sharing that knowledge with no-nonsense, to-the-point concise videos. Truly INSPIRATIONAL. Keep up the good work - love to watch and learn.
Amateur woodcrafter. I used this technique tonight in some half laps I'm using for cabinet doors. Worked INCREDIBLY easy. Definitely recommend using a flat tooth blade as I had some extra sanding to do with the blade I used. Thanks for the great content. Earned a sub, for sure!
Another great video! You could probably save a little time by drawing an 'X' from opposing corners on the end to find the center. I would just use the shim as a straight edge to draw the lines and that should get me dead on center or really close.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
I always appreciate your videos of expected cleverness, but never as much as when I’m working on a project which involves one of your topics. It’s then that the relevance and usefulness of your information shines. I can’t wait for morning to start on my half-laps. 😁
This is a great video. I’m a novice woodworker and I decided to try this technique on a “hidden” frame for a project I’m doing. Great opportunity to try your method because any mistakes won’t be seen. But it turned out way better than I expected
Superb! I'm an old shopfitter who has been pottering around in my ever developing garage workshop. This is an absolute gem of a tip. Easy to execute and virtually free. I went ahead, a while back and bought the Banggood kerf-doofer when it was on sale at £15 Sterling. Well, it absolutely works, and I cannot complain with the quality of the accessory which is excellent - especially for the price! However, your tip makes half laps, dados and grooves a breeze on the table saw. Thank you for sharing! You have a new subscriber! 👍
I've seen people use a drill bit of the same diameter as the blade kerf... however the wood shim is a lot easier to place and it stays where you put it... Superb video sir! thanks for great useful tips without a lot of fluff
Thank you very much. I didn't want to use a drill bit because that leaves the folks out that are using thin kerf blades. Great suggestion though! I just uploaded a video on how to make the shim if you're interested. th-cam.com/video/nsw5qlrdx2A/w-d-xo.html
That is a great way to do half laps! I like it because I use a lot of reclaimed wood and the pieces are never the same width. I always flatten a reference side any way so thickness is never the issue.
Thanks i watched this video this morning, Went out to shed and tried it out both on sled and miter gauge was very surprised at how neat they both came out definitely a worthy way of doing things wont be using the ruler now lol
More brilliance! I think the most challenging part of woodworking is getting the measurements correct...problem solved. After only two clips I'm ready to put you in the top ten woodworking channels on YT. Thanks for sharing!
Thanks Jodee ... Once again a fantastic video!! I always learn something new with every video you make. Your time and effort is truly appreciated. Cheers Mate!
Excellent demonstration and presentation. I learned a lot from you today. Please keep these wonderful, helpful videos coming! Thank you ever so much for your time and efforts.
Ingenious out of the box thinking tip for how to make a kerf-width shim that is simpler than using a kerf-maker device in some scenarios. Having to smooth the bottom of a dado or half-lap with a chisel is wrought with potential error, so I invested in a Freud true flat tooth blade that increases the joint accuracy and time it takes to make a given joint; no bottom cleanup! For some rabbits or dadoes, although $$$, love using my Lie-Nielsen router plane. Caveat to that is when using plywood as a router plane can catch and pull up/splinter the layers (probably not as much an issue if using good quality ply vs the medium big box store stuff I more readily have at my disposal). Thanks you for video tips and instruction.
Thanks! Hey I just uploaded a video on how to cut the shim if you are interested. Super easy and no measuring. th-cam.com/video/nsw5qlrdx2A/w-d-xo.html
Thanks, your a great teacher. You might include in a future video lesson that," The reason you need the shim is because your saw is calibrated to the Right side of the blade". I look forward to getting notifications of your new lessons.
Your so right in my opinion i been using routers from 1974 and the round base are best and i use the flat side maybe 2% of the time its only for odd ball case's plus I do have a nice router table but good job and good teacher
You do an excellent job of explaining your process what ever it may be, I truly enjoy watching your video`s . Thank you for sharing ( Stay Safe you & your family ) .
This is a great method. Thanks for sharing it with us. I'd like to see you make an arts and crafts style picture frame using this method. Thanks again.
I just finished making and adjusting my crosscut sled. In order to adjust the fence, I bought some cheap feeler gauges. I was about to make this shim when I realized I could just stack some feeler gauges until they fit snugly in a slot cut by my blade and use those as my shim.
Great video. I liked how you found center. I use a radial arm saw but the principal is the same. I'll have to remember to use the correct blade. I have both flat tooth and tilted teeth on some blades. Thanks, Barry
Wowsers that is Very helpful video thank you so much. That turned out very smooth look on that half lap. Keep up the great craftsmanship and hard work my friend keep making greatness.
Seems to me this will work with dado stack too, just need to have the right sized shim. Great idea, I've been struggling to be consistent with these and similar types of joinery.
Nice job. Great that you showed using a single blade. I have dado stacks but like the flat grind single blade method and the use of spacers to ensure a quick fit without all the nudging etc. With all the blades I have it's time to add a couple more 24tooth flat top grind blades. Will use the link you provided which is much appreciated.
HEY! If anyone needs a quick and easy way to make the blade-width shim, here's a quick and easy way that's ACCURATE! th-cam.com/video/nsw5qlrdx2A/w-d-xo.html
Awesome how he gets straight to the point. No time wasted, precise clear instructions then done. In and out in few minutes
I just wanted to tell you I used this method today for the first time and it worked perfectly.
I've been watching videos to improve my woodworking for 3 years now, how come i'm just now finding your videos? All of them are amazing. Thank you.
Man, I’m literally inspired by all your videos!!!
This is by far a very cool technique; I think I have watched this video several times which mean I plan on using it- thanks
A nice, elegant use of direct measurement to size the pieces correctly. Use of the shim is a plus and the step I've been missing. I gotta make me one of those!
richard
--
“Everything that needs to be said has already been said. But since no one was listening, everything must be said again.”
- André Gide
Absolutely love that quote. I need that on my wall in the shop!
Thanks for adding the less expensive alternative blade!
Thanks for watching and acknowledging that. I'm glad someone noticed!
I have now watched three (3) of your instructional videos and very impressed with your presentation and content.
You are incredibly talented AND have a knack of sharing that knowledge with no-nonsense, to-the-point concise videos. Truly INSPIRATIONAL. Keep up the good work - love to watch and learn.
Amateur woodcrafter. I used this technique tonight in some half laps I'm using for cabinet doors. Worked INCREDIBLY easy. Definitely recommend using a flat tooth blade as I had some extra sanding to do with the blade I used.
Thanks for the great content. Earned a sub, for sure!
Another great video! You could probably save a little time by drawing an 'X' from opposing corners on the end to find the center. I would just use the shim as a straight edge to draw the lines and that should get me dead on center or really close.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Thanks a mil bro - this was the best explained and shown method. Wasted the last hour until I found this!
amazes me how much more acheivable a tight half lap is from watching this video. looking forward to scrolling through your other videos! Thanks mate!
I always appreciate your videos of expected cleverness, but never as much as when I’m working on a project which involves one of your topics. It’s then that the relevance and usefulness of your information shines. I can’t wait for morning to start on my half-laps. 😁
Yup. Figured that out a couple of years ago. The blade-thick spacer is the key. Works like a charm. Good video. Thanks.
Very well presented. This is a GREAT - NO MEASURE technique. Will get that shim made and make some half laps! !! !!!
This is a great video.
I’m a novice woodworker and I decided to try this technique on a “hidden” frame for a project I’m doing. Great opportunity to try your method because any mistakes won’t be seen. But it turned out way better than I expected
Awesome dude. Your vids are quickly becoming my "bag of tricks" go-to.
Superb! I'm an old shopfitter who has been pottering around in my ever developing garage workshop. This is an absolute gem of a tip. Easy to execute and virtually free. I went ahead, a while back and bought the Banggood kerf-doofer when it was on sale at £15 Sterling. Well, it absolutely works, and I cannot complain with the quality of the accessory which is excellent - especially for the price!
However, your tip makes half laps, dados and grooves a breeze on the table saw.
Thank you for sharing! You have a new subscriber! 👍
Excellent, and with paired to the video on making the perfect shim it is unbeatable!
You are a great teacher. Thank you.
This was very simple and helpful. As a new woodworker, I appreciate the tip.
I've seen people use a drill bit of the same diameter as the blade kerf... however the wood shim is a lot easier to place and it stays where you put it... Superb video sir! thanks for great useful tips without a lot of fluff
Thank you very much. I didn't want to use a drill bit because that leaves the folks out that are using thin kerf blades. Great suggestion though! I just uploaded a video on how to make the shim if you're interested. th-cam.com/video/nsw5qlrdx2A/w-d-xo.html
That is a great way to do half laps! I like it because I use a lot of reclaimed wood and the pieces are never the same width. I always flatten a reference side any way so thickness is never the issue.
best best best video, script, and approach on this topic
Thank you man it's the easy way to do it bravo. 🎩 ghany from Algeria.
Tried this today and it worked perfectly the first time!! Thanks for this.
Thanks i watched this video this morning, Went out to shed and tried it out both on sled and miter gauge was very surprised at how neat they both came out definitely a worthy way of doing things wont be using the ruler now lol
That's Awesome! Thanks for coming back and commenting on how it went!
Very good instruction; short and to-the-point. Thank you.
Terrific idea! Wish I’d seen this and the 1/2 lap vid two walks ago. Would have saved me lots of head scratching and scrap making. Many thanks!
Wow that blade height trick is just what I needed thanks !!!!
Nicely done, and so much simple than a Kerf maker!
You make things so easy and it only motivates me to learn more about wood working. Great video! Thanks.
Yet another clear and helpful video. I really like your approach
Used your procedure today. Works great. Will check out the Flat Grind blade you show in your tool list.. Thanks
Very very good instructions!!! Thank you! Appreciate it! Learned a very valuable technique.
More brilliance! I think the most challenging part of woodworking is getting the measurements correct...problem solved. After only two clips I'm ready to put you in the top ten woodworking channels on YT. Thanks for sharing!
Well done video! You sir are a good instructor. Thanks for posting.
Great video!
Always breaking it down and giving great, and useful, information!!
Thanks
Thanks Jodee ... Once again a fantastic video!! I always learn something new with every video you make. Your time and effort is truly appreciated. Cheers Mate!
Always learn great tips from you Jody, thanks!
Great tips and tricks, love it!
Jodee: “I can put a man on the Moon, without making any marks or measure anything.”
NASA could use Jodee so there are no metric vs. imperial confusions ;-)
That was great. I’m always grateful for what you share.
Clear and to the point that’s why I subscribed to your channel
Flat bottom blades make the woodworking world go round
thank you Jodee. That is an absolutely fantastic tip.
Great job explaining everything thank you
I love the simplicity
Well done. Will look forward to the right project to try half laps.
Excellent demonstration and presentation. I learned a lot from you today. Please keep these wonderful, helpful videos coming! Thank you ever so much for your time and efforts.
- It WORKED VERY well. Helpful video. Thanx 4 sharing.
Your the man Jody! Thanks for the great tips!
Absolutely BRILLIANT !!
Thank you for the videos. As always super helpful
Fantastic technique~! I wish I'd seen this video before now, but better late than never. Thanks for sharing it~!
Ingenious out of the box thinking tip for how to make a kerf-width shim that is simpler than using a kerf-maker device in some scenarios. Having to smooth the bottom of a dado or half-lap with a chisel is wrought with potential error, so I invested in a Freud true flat tooth blade that increases the joint accuracy and time it takes to make a given joint; no bottom cleanup! For some rabbits or dadoes, although $$$, love using my Lie-Nielsen router plane. Caveat to that is when using plywood as a router plane can catch and pull up/splinter the layers (probably not as much an issue if using good quality ply vs the medium big box store stuff I more readily have at my disposal). Thanks you for video tips and instruction.
Great and useful tip using shim...
That was particularly useful. I only need to make sure I can get that shim cut to exactly one blade width. Thanks again.
Thanks! Hey I just uploaded a video on how to cut the shim if you are interested. Super easy and no measuring. th-cam.com/video/nsw5qlrdx2A/w-d-xo.html
as always pleasure to watch your vids
Thanks, your a great teacher. You might include in a future video lesson that," The reason you need the shim is because your saw is calibrated to the Right side of the blade". I look forward to getting notifications of your new lessons.
That’s amazing brotha! Dude you’re coming thru with some great tips. Thanks man!
Thank you so very much, you finally made it so easy 👌
Your so right in my opinion i been using routers from 1974 and the round base are best and i use the flat side maybe 2% of the time its only for odd ball case's plus I do have a nice router table but good job and good teacher
You do an excellent job of explaining your process what ever it may be, I truly enjoy watching your video`s . Thank you for sharing ( Stay Safe you & your family ) .
Game changer for me thanks a bunch
Best how to channel
Perfectly explained. Thanks for sharing. I'm going to try this.
I like this technique a lot.
This is a great method. Thanks for sharing it with us.
I'd like to see you make an arts and crafts style picture frame using this method. Thanks again.
I just finished making and adjusting my crosscut sled. In order to adjust the fence, I bought some cheap feeler gauges. I was about to make this shim when I realized I could just stack some feeler gauges until they fit snugly in a slot cut by my blade and use those as my shim.
Great video. I liked how you found center. I use a radial arm saw but the principal is the same.
I'll have to remember to use the correct blade. I have both flat tooth and tilted teeth on some blades.
Thanks, Barry
I knew there had to be a way to do this. Thanks.
Great tip. Thank you.
This is perfect! I'll be using this method with my dado stack to create my half laps instead of a router and having to build some complicated jig.
Wowsers that is Very helpful video thank you so much. That turned out very smooth look on that half lap. Keep up the great craftsmanship and hard work my friend keep making greatness.
Awesome tips, thanks for sharing.
Thank you!! love your videos!
Awesome video. Thanks for posting
very good video, I ALWAYS HAD TROUBLE WITH THEM . THANKS,lloyd
Thanks Jodie....excellent !
Seems to me this will work with dado stack too, just need to have the right sized shim. Great idea, I've been struggling to be consistent with these and similar types of joinery.
Nice video man. Thanks!
Nice man very precise cuts
This video was very helpful. Thank you 👍😎🇦🇺
Brilliant! Thank you
Thank you very much, I enjoyed your video, woodworking is my hobby and this is very useful. 👍👍👍
Excellent, as always.
You have great videos
Great video
Nice video, Well done. Thank you
Another great tip. Very useful. Thanks!
Great tip, thank you
As always, good and practical tips!!!!
Wow. That's awesome. Thank you and SUBSCRIBED!
Nice job. Great that you showed using a single blade. I have dado stacks but like the flat grind single blade method and the use of spacers to ensure a quick fit without all the nudging etc. With all the blades I have it's time to add a couple more 24tooth flat top grind blades. Will use the link you provided which is much appreciated.
Nice job!
hi...I made a watching your video. Thank you for being an inspiration to me.