I’ll bet you could find some tubes at Tractor Supply for those tires. Then it won’t matter how bad they are, cause as long as the tube stays in the tire, it’ll stay up.
The Commuter Industries trikes used the 4 on 4" bolt pattern just like the Club Car Golf Carts, never seen one with a 5 bolt rear wheels. You could get the hunting version in Green. My Sasquatch is Black and red.
A childhood friend had a TSC trike, but was rear mounted one cylinder Tecumseh 8hp engine8, which made for much lower seating & it had dual brakes for each wheel. This was late 70s. Thing was a tremendous fun to ride! Im not sure but think your model is a bit newer early mid 80s idk ... got me to sub, gl
also i remember the guy i got it from said they used them for hunting to haul out of the woods and the one i had was a kohler 8 horse electric start with a comet clutch i found a belt that worked at a industrial supply place
I was walking in a guy offered me $1,000 for my truck. I laughed and we started talking. One thing lead to another and he tells me he has something I might be interested in. Next thing you know I’m at his house picking up this 3 wheeler.
@@motorcyclerewind That is awesome!! I thought at first from the trees and the sun that you were in Pennsylvania but I am wondering if you are more North. My second guess would be somewhere like Indiana..I am in Pennsylvania ...I have had similar experiences..-John
I bought one of those in a junkyard in Wyoming it was serial number 0000069 and I tried to research it but not much info but I stopped by the town in Iowa and asked the locals about the company and they made golf carts and servi carts but the company was not in business very long
I went down the Commuter Industries rabbit hole. Found the name of the owner. He has since passed so I have emailed his sons. Fingers crossed we can get some info.
Those who tend not to wait spend the future to contemplate. Please consider flushing out motors before you attempt to start. Rings can be ruined crank bearings can seize and 2 stroke motors especially the area under the piston can hold debri.
@@motorcyclerewind You come across like a cool guy AND your my age so I was hoping you would receive my thoughts in the spirit in which they were given. Thanks
call go power sports they will be able to tell you exactly what you need and probably have it in stock by the way thats a comet cvt they still make em but theyre a bit pricey
Or A belt for A gas powered golf kart.,;r cart engine four engine. No water goes to the bottom it doesn't float on top cause water is heavy than gasoline fuel. It's A oil which means the fuel will float instead of the water.
Tricksters on the naughty step!considering it's life choices lol,love it😅
Sometimes you have time let them think about what they did!😂🤣😂 Thanks for watching.
Just admiring the truck, too. I totally forgot about the Ford yellow/white two-tone, and I always liked that combo on the 68-72 GMC/Chevy.
The old truck makes friends everywhere it goes. Thanks for watching.
That's so awesome love the pop pop sound 👍😆...
Thank you 🤗 I do too!!! This guy is gonna be fun. Just need to make it run better then we can make it look better. Thanks for watching.
I’ll bet you could find some tubes at Tractor Supply for those tires. Then it won’t matter how bad they are, cause as long as the tube stays in the tire, it’ll stay up.
That’s a great idea. Thanks for watching.
Love your excitement when it starts running! Great video
Thanks so much!! So much fun.
The bent front fork is indicative of lactose intolerance when the owner ran into the outhouse 😂
When you gotta go, you gotta go!
I love this project
Such an odd/interesting project. Thanks for watching.
PIGLET!!!!
lol, the GPZ brings back memories... had the 750 turbo. was a slight upgrade from a honda c90...
🤣😂🤣 definitely an upgrade. Thanks for watching.
The Commuter Industries trikes used the 4 on 4" bolt pattern just like the Club Car Golf Carts, never seen one with a 5 bolt rear wheels. You could get the hunting version in Green. My Sasquatch is Black and red.
This one continues to be an odd duck!
A very cool moment when It started running on its own steam 👍🙂
Love a first start!!! Thanks for watching
Looks like the exaust stinger is a multi-disc like the old Supertrapp, neat machine!!
It really is interesting.
A childhood friend had a TSC trike, but was rear mounted one cylinder Tecumseh 8hp engine8, which made for much lower seating & it had dual brakes for each wheel. This was late 70s. Thing was a tremendous fun to ride! Im not sure but think your model is a bit newer early mid 80s idk ... got me to sub, gl
Cool. Thanks for watching
also i remember the guy i got it from said they used them for hunting to haul out of the woods and the one i had was a kohler 8 horse electric start with a comet clutch i found a belt that worked at a industrial supply place
Wish this one had electric start!!!
Super cool project!!! ....How did you find this at Tractor supply???...new subscriber here..looks like a minibike with a few modifications....-John
I was walking in a guy offered me $1,000 for my truck. I laughed and we started talking. One thing lead to another and he tells me he has something I might be interested in. Next thing you know I’m at his house picking up this 3 wheeler.
@@motorcyclerewind That is awesome!! I thought at first from the trees and the sun that you were in Pennsylvania but I am wondering if you are more North. My second guess would be somewhere like Indiana..I am in Pennsylvania ...I have had similar experiences..-John
So cool
Nothing like a first start. Especially when you don’t have to spend any money. Thanks for watching.
Take off the oil filler cap and replace it with a grease fitting for high performance use.
😂🤣😂
Those are some seriously large meats on the back end of that trike!
Yes they are. Thanks for watching.
It lives nice.
Love a first start. Thanks for watching.
I bought one of those in a junkyard in Wyoming it was serial number 0000069 and I tried to research it but not much info but I stopped by the town in Iowa and asked the locals about the company and they made golf carts and servi carts but the company was not in business very long
I went down the Commuter Industries rabbit hole. Found the name of the owner. He has since passed so I have emailed his sons. Fingers crossed we can get some info.
Its a shame you can't find number 420 to go with number 69 lol
Those who tend not to wait spend the future to contemplate. Please consider flushing out motors before you attempt to start. Rings can be ruined crank bearings can seize and 2 stroke motors especially the area under the piston can hold debri.
Thats a great tip. Thanks for sharing
@@motorcyclerewind You come across like a cool guy AND your my age so I was hoping you would receive my thoughts in the spirit in which they were given. Thanks
Google said “ Density: Gasoline has a density of about 700 kg/m^3, while water has a density of about 1000 kg/m^3. “
Awesome. Thanks for watching
I love that GPZ
It’s the BEST. Thanks for watching.
The 800 designated horsepower.
T-800 for 8hp. Did they do this for the Sasquatch.
Please notice I gave you a thumbs up 👍🏻 😉.
I see your 👍 and raise you 👍👍!Thanks for watching.
👍👍👍
Another praise for the Japanese engines
Go Kawasaki!!!!
call go power sports they will be able to tell you exactly what you need and probably have it in stock by the way thats a comet cvt they still make em but theyre a bit pricey
Great info. Thanks for watching.
Trike is a Commuter industries 340 Granger or Sasquatch 340
That’s what I have come up with too!!! The difference is the color and the rack.
By the way the pyramids were built from the top down.
I knew it was either the bottom up or the top down!🤣🤣😂
Front forks are they bent? It's really cool
Think they might be. Could be why it is missing half of the front fender.
It’s a runner.
Yes it is. Needs some more love but it’s a start. Thanks for watching.
I would use A snowmobile belt on that three wheeler.
Great idea. Being from Louisiana snow mobiles never come to mind. 🤣😂🤣
Actually made me pee😂
😂🤣😂 Best comment ever! Thanks for watching.
Comparing it to the pictures on Google the front end is bent back
I agree. Thanks for watching.
It's A Kawasaki engine so it has it's own carburetor jets sizes and setting spec's.
Good thing is the Kawasaki manual has good info. Thanks for watching.
The carb is mesed up it flooding bad
Agreed. The carb needs work. Thanks for watching.
Water sinks to the bottom of the fuel tank.
Thanks for the info and thanks for watching.
Either running to rich or an ignition miss
Carb needs a good cleaning for sure. Thanks for watching.
You gained a new subscriber
Awesome. Thanks for watching.
CVT belt drive like that the belt supposed to be tension pretty tight when it's sitting still
That’s what I was thinking. Have to research the correct size. Thanks for watching.
Yeah, I think that belt needs to be switched out. It's not the right belt and the front end needs to be straightened. That sucker was bent.
Must have ran it into a tree.
Or A belt for A gas powered golf kart.,;r cart engine four engine. No water goes to the bottom it doesn't float on top cause water is heavy than gasoline fuel. It's A oil which means the fuel will float instead of the water.
Thanks for your help. I really appreciate it.
Definwtly made a lot more work for yourself unloading it that way.. I wouldve just grabbed it from the rack and pulled it off…
The rack is not attached. Merely a display item.🤣😂🤣 Thanks for watching.
wouldn't it have been easier to just take the gas tank off?
Maybe. All I did was stick the hose into it. 😂🤣😂 Thanks for watching.
should consider atv better value
Thanks for watching
Your microphone is cutting in and out