That interior brush looks legit. A nice and quick solution for a slightly heavier, intermittent interior clean. I need to get one. That steam after the wipe! Why I have neglected trying that! 🤦♂
TRC and Sydni, thank you for allowing us to observe in real time the steps and procedures! As a fellow home shop detailer, I have seen a few tips and tricks that I'll certainly be adding to my regimen!
Sydni, I learned a lot from your video. My key takeaway is that your very thorough and definitely earned every penny of that detail. I will have to try the screwball brush for the interior. Spraying the steam into the towel seems much safer for sensitive surfaces. I've been concerned that steaming could dry out and age some interior materials. Also, boxing the interior glass with the microfiber applicator is a genius idea.
Big thanks Sydbi and TRC, for me this was an hour of pure gold. To witness such a thorough view of the process with your commentary Sydni, to pickup all your tips and tricks, its really something. Big thumbs up! There were 2 moments which before I saw you do this I would definitely be afraid of / very careful to not do it this way: 1.leaving PS cockpit on surfaces for what seemed to be a rather long time - is this really safe with a wide range of interior cleaners or only P&S? 2.Bug off residues behind the front grill - arent you afraid it doing some damage long term without rinsing it off with a pressure washer? Thx
Glad this video was helpful. 1- I can only speak for P&S Interior cleaners on the safety to leave them. Cockpit and Xpress only; don’t leave enviro clean like this. 2- like I did in the video I usually rinse it with the detail keg or yes a pressure washer if it gets behind the grill. Its just is going to depend on the vehicle. Other times I only need a brush with lots of rinseless on it to rinse the bug off away.
Sydni’s videos are always awesome! Rag Company please do alot more videos like this! It’s awesome to learn better ways of doing stuff. Sydni just makes it look so easy. I think she secretly taught Levi and Anthony most everything they know 🤣🤣 jk
I have seen so many detailing videos over the past two months to refresh my detailing skills before I get back in the game that I’m very sick and tired of 99% of them. This was in the 1% portion. Thank you! I saw a few “pro tips” that were very helpful . The only disappointing thing was I wish there had been a product list of the products used in the video like the canister sprayer. I’m sure I’m not in a position yet to afford buying the canister sprayer, but.I know can find it. Again, I enjoyed the fresh Ideas.
Hey Clay, I also like knowing what products are used in detailing videos. I believe she used P&S Absolute for the exterior. P&S Tru Vue for glass. P&S epic waterless wash for door jambs. P&S cockpit and P&S Swift for the interior. The canister was called “No Rub”.
As a mobile detailer in Atlanta, I only dream of air conditioning. It is INCREDIBLY hot and humid here this summer. So hot in fact, I can't use Beadmaker at all. Only leaves streaks for me. Bummer :(
I did at some point but since, I have swapped to Carpro Hydro2. It’s much easier to me and lasts six months. Spray on, wet car, immediately rinse off. No dwell time, no cure time, just makes the water fall off.
If the vehicle doesn’t need to be clayed, can you just apply bead maker with a FTW and then follow up an hour later with defender to get that added protection, thanks John
Hey Sidni! Wanna say a big thank you for the window cleaning advice with the microfiber applicator! I just went ove into the garage to try it out and it makes the job so much easier! I was using 2 FTWs so far which is already a breeze to work with, but changing one towel to the mf-applicator makes it even better. Cheers from germany🥳
This is amazing!!! So glad it helped. It changed my world about 4 years ago and I can’t clean windows any way. I have found if you can remove frustrations from certain processes your whole detail goes better and keeps you loving what you’re doing🎉
Sydni is my number 1 favourite lady in the global detailing Industry. So cool that we've now connected - initially via Linked In. Such a shame I didn't know of her when I was in Boise back a decade ago. Spent six months there in total with two separate visits. Boise was so nice back in 2010-2013 especially when Burger Time was still around
Great tip that I picked up from another detail channel. Open the door with the handle and close the door using the handle. This way we don’t micro scratch the clear coat
This is not a bad tip! I certainly do that on corrected and coated cars. But I assure you this was not an issue on this vehicle. It’s far past the point of being micro scratched. I think one of the reasons we wanted to do this video was to be completely real and not fall into the internet obsessed ways of being perfect on imperfect cars.
Great tip on the steamer and Absolute, maybe fill the steamer with DI water? Am learning rinseless has multiple applications 256:1 baby, thx YVAN! Always pickup a few good tips on every pro detailer, your emblem cleaning technique is a great touch. Only takes 2 mins and it’s something you can point out to the customer. Emblems are always a tough area to make nice especially on black paint, ughhhh. Now I see a better use case for a cockpit brush. I’m just a weekend warrior detailer, but like to keep our cars nice. It’s too bad no one ceramic coated that vehicle, would make your life easier. What rack did you use to hold all those bottles?
Fantastic! It’s the Kobalt rail system with dowels, however right after we were done filming Tony and ripped my entire shop apart and started over! So stay tuned for a shop update
The first thing you should do is take your Dyson V15 vacuum, and vacuum the mats, so no dust, and dirt can escape onto the carpet, your floor, nor driveway. We have to always be clean. P.K.
You can use almost anything with a clay towel for mechanical decontamination. Whatever spray/liquid you use is just to provide lubrication for the clay towel to glide around on the surface, the clay towel itself is what is doing the decontamination.
Question: I love the idea of Absolute being used in a steamer, so I just bought both for car detailing. Do you leave Absolute in your steamer 24/7? I would love to leave Absolute in my brand new McCulloch steamer 24/7 and not worry about a side effect that would ruin and/or shorten the life of my steamer. And if I can, I’m assuming 256:1.
Yes 256:1. I can only tell you my experience but absolute has basically lived in my steamer for 2 years and I’ve never had to do white vinegar therapy, and have had zero clogging issues. Before absolute I clogged and blocked steamers constantly with hard water
Well done video. I expected a long video to take forever but you did such a good job of describing what you were doing it worked great. What is No Rub please?
Matt black wheels look good. Keeping them looking like new is a pain. Or a good wheel cleaner. Chemical manufacturers should focus on this. A quick efficient cleaner.
That’s a great idea in theory. I think the issue would be too light of a cleaner isn’t going to get them very clean. That’s a difficult product to make, any time you combine two functions you lose a lot of power of both products. This method works very well for me 😊
Such an amazing video. I love P&S products I have about 85% of P&S product line. I do need some advise please. I have the exact same steamer but for some reaon mine spits water off and on the entire time I'm using it. Is this normal? I use distilled water and took your advise and used one half cap of Absolute. I steam outside of the car when I start but it still spits water during use. I really cant affo😮rd to buy a more expensive steamer I purchased mine after seeing yours. I appreciate any help, I have no idea what I'm doing wrong. Thank you for all you do for the detailing community. Have a wonderful weekend.
Nice content , enjoyed the longer format, If you was going to add iron buster into this would you put it in before the reset towel and bead maker? Or how would it have changed the process? Last adding the defender over the clay and seal with bead maker what kind of protection time do you get out of this? I understand it’s a range depending on treatment but what do you tell your customer the range is Thx
Yes and no. I do soak my towels in Rags to Riches every couple months and that keeps them working tippy top, but you can also spritz them with rags to riches diluted as soon as you’re done drying and then throw in basket and that helps a ton too.
Fantastic step-by-step video. Very educational. And I absolutely love the explanation of defender over the top of beadmaker before the bead maker has cured. Such a simple solution and fabulous final touch for you and the customer.
What is the softest clay towel you offer at TRC? Didn't know beadmaker could be used as "clay lube". Love this! But want to reduce the chances of marring, therefore the softest I can find the better :)
This was great Sydni ,fellow garage detailer as well. The Rag Co. did a great job capturing the whole process and you along with Tony did awesome. Thanks for the content and appreciate you bringing us along for the detail , vehicle came out great.
I am going to call a foul and throw a yellow flag for the many non-label use of products in ways they are not sold, or commercialized. Just because I can use a microfiber towel to hold food does not make them plates.
Paint Gloss. its a quick detailer, but it is an anti static so it speeds up the vacumm process and refreshes carpet. Just 1-2 sprays per area. Makes a huge difference with dog hair or sand.
Question sydni… when you do the deep cleaning with bead maker and that red clay square rug… don’t you scratch the car??? I’m always been afraid to do that step but I see you go all over the car with it…. Plus you said it gives it a shine… nice tip!
Absolutely not, it’s fine grade synthetic clay and we’re using Bead Maker as the Lube and Sealant- so no marring is caused. You would not use traditional clay bar without polishing but the clay towels and sponges are designed to be able to be used with out polishing
Great vid! Very informative! Loved all the tips and off label uses! One question though... What protectant was used on the mats? I went back and watched it again to make sure I didn't just miss it being said.
Thank you for all the amazing tips. What brand of dust vac brush do you use and where coukd I get one? I tried several and jjat cant find one I like either not liking the bristles or the angle. Your vac brush attachment looks amazing I would love to try one. Have a wonderful week.
It’s a central vac with about 160 lift and then the hose is the retract-a-vac. It was about $600 installed and is the absolute best $600 I’ve ever spent! It’s soo great.
Yes unfortunately, if you noticed the trucks in the driveway, I had contruction going on in the house and they had the water turned off so I actually had to clean the wheels before Jimmy could get there 😢 but I used crystal wash and brake buster, DF brushes, mud buster in the wheel wells and rinsed everything with Pressure Washer
No website 🤪 I have run my business solely on referral basis and no advertising. Business name is iWash Auto Detailing but under handle SBGtheDetailer on all platforms
So sorry, I wasn’t the clear 😅 the Scrub Ninja you mentioned is an interior scrub pad and has material you wouldn’t use on the exterior The jersey bug scrubber is only for bugs and wouldn’t be used on interiors
Yes, I have a home occupation permit. My neighborhood is permitted for home business because of its location. Areas vary so you definitely need to make sure you can legally operate out of garage
![[TH] 2024 PMGC League | Survival Stage วันที่ 1 | PUBG MOBILE Global Championship](http://i.ytimg.com/vi/FVFT-PFwU80/mqdefault.jpg)
That interior brush looks legit. A nice and quick solution for a slightly heavier, intermittent interior clean. I need to get one. That steam after the wipe! Why I have neglected trying that! 🤦♂
🎉 for real on the Curveball!
I couldn’t detail without my steamer
TRC and Sydni, thank you for allowing us to observe in real time the steps and procedures! As a fellow home shop detailer, I have seen a few tips and tricks that I'll certainly be adding to my regimen!
Thanks Ed! Glad you found this helpful!
Sydni, I learned a lot from your video. My key takeaway is that your very thorough and definitely earned every penny of that detail. I will have to try the screwball brush for the interior. Spraying the steam into the towel seems much safer for sensitive surfaces. I've been concerned that steaming could dry out and age some interior materials. Also, boxing the interior glass with the microfiber applicator is a genius idea.
Thanks!!! 🎉
Big thanks Sydbi and TRC, for me this was an hour of pure gold. To witness such a thorough view of the process with your commentary Sydni, to pickup all your tips and tricks, its really something. Big thumbs up! There were 2
moments which before I saw you do this I would definitely be afraid of / very careful to not do it this way:
1.leaving PS cockpit on surfaces for what seemed to be a rather long time - is this really safe with a wide range of interior cleaners or only P&S?
2.Bug off residues behind the front grill - arent you afraid it doing some damage long term without rinsing it off with a pressure washer?
Thx
Glad this video was helpful.
1- I can only speak for P&S Interior cleaners on the safety to leave them. Cockpit and Xpress only; don’t leave enviro clean like this.
2- like I did in the video I usually rinse it with the detail keg or yes a pressure washer if it gets behind the grill. Its just is going to depend on the vehicle. Other times I only need a brush with lots of rinseless on it to rinse the bug off away.
Great job guys, Sydni putting it down
Sydni’s videos are always awesome! Rag Company please do alot more videos like this! It’s awesome to learn better ways of doing stuff. Sydni just makes it look so easy. I think she secretly taught Levi and Anthony most everything they know 🤣🤣 jk
I have seen so many detailing videos over the past two months to refresh my detailing skills before I get back in the game that I’m very sick and tired of 99% of them. This was in the 1% portion. Thank you! I saw a few “pro tips” that were very helpful . The only disappointing thing was I wish there had been a product list of the products used in the video like the canister sprayer. I’m sure I’m not in a position yet to afford buying the canister sprayer, but.I know can find it. Again, I enjoyed the fresh Ideas.
Thank You for this comment!! This was literally our goal in making this video. To be a little more real and helpful. 🙏🏻
Hey Clay, I also like knowing what products are used in detailing videos. I believe she used P&S Absolute for the exterior. P&S Tru Vue for glass. P&S epic waterless wash for door jambs. P&S cockpit and P&S Swift for the interior. The canister was called “No Rub”.
Hi Sidney, I recommend when blowing stuff out to wear a mask... one never knows what type of dust is getting blown... good video 👍👍
Good tip, thanks for watching!
Ain’t no body got time for that. When you do this full time you stop caring
As a mobile detailer in Atlanta, I only dream of air conditioning. It is INCREDIBLY hot and humid here this summer. So hot in fact, I can't use Beadmaker at all. Only leaves streaks for me. Bummer :(
Have it tried in on wet car? Like as drying aid
Aid
I did at some point but since, I have swapped to Carpro Hydro2. It’s much easier to me and lasts six months. Spray on, wet car, immediately rinse off. No dwell time, no cure time, just makes the water fall off.
The part where she said I’m going to go straight to blowing.
Someone had to catch it 🤷♀️
thought that might be the way to get clientele...
The dentist analogy was on point!
Absolutely
If the vehicle doesn’t need to be clayed, can you just apply bead maker with a FTW and then follow up an hour later with defender to get that added protection, thanks John
Gotta love Sydni and all of her tips and tricks. Thanks Sydni
As a TRC an P&S addict I loved this thanks for doing this now I want to see the same thing Levi Gates garage 😂👍🏼👊🏼
Thanks!! So fun!
Wow this is a 5 plus star service!!! ✨✨✨✨ such attention to perfection while make it efficient, congratz ! 👏
It really is, thanks for watching!
Thank you! ❤
Hey Sidni! Wanna say a big thank you for the window cleaning advice with the microfiber applicator! I just went ove into the garage to try it out and it makes the job so much easier! I was using 2 FTWs so far which is already a breeze to work with, but changing one towel to the mf-applicator makes it even better. Cheers from germany🥳
This is amazing!!! So glad it helped. It changed my world about 4 years ago and I can’t clean windows any way. I have found if you can remove frustrations from certain processes your whole detail goes better and keeps you loving what you’re doing🎉
@@sbgthedetailer Absolutely! Keep up the good work you're doin 🤩
Sydni is my number 1 favourite lady in the global detailing Industry. So cool that we've now connected - initially via Linked In. Such a shame I didn't know of her when I was in Boise back a decade ago. Spent six months there in total with two separate visits. Boise was so nice back in 2010-2013 especially when Burger Time was still around
Aww thanks Matt! I am glad we have connected as well!!
@@sbgthedetailer your welcome, it's great getting to see what your doing these days. Hopefully some day you get to visit Australia
Syndi, great detail video. Please link me on where I can get that vacuum hose attachment on the wall. I need it. Thank you
Great tip that I picked up from another detail channel. Open the door with the handle and close the door using the handle. This way we don’t micro scratch the clear coat
This is not a bad tip! I certainly do that on corrected and coated cars.
But I assure you this was not an issue on this vehicle. It’s far past the point of being micro scratched. I think one of the reasons we wanted to do this video was to be completely real and not fall into the internet obsessed ways of being perfect on imperfect cars.
@@sbgthedetailer Why not spray bug off on the glass?
@@pjfan173 it could leave spots, for glass I spray directly on to the bug scrubber and scrub the glass and rinse immediately
@@sbgthedetailer thanks for the reply.
Great tip on the steamer and Absolute, maybe fill the steamer with DI water? Am learning rinseless has multiple applications 256:1 baby, thx YVAN! Always pickup a few good tips on every pro detailer, your emblem cleaning technique is a great touch. Only takes 2 mins and it’s something you can point out to the customer. Emblems are always a tough area to make nice especially on black paint, ughhhh. Now I see a better use case for a cockpit brush. I’m just a weekend warrior detailer, but like to keep our cars nice. It’s too bad no one ceramic coated that vehicle, would make your life easier.
What rack did you use to hold all those bottles?
Fantastic!
It’s the Kobalt rail system with dowels, however right after we were done filming Tony and ripped my entire shop apart and started over! So stay tuned for a shop update
Love the video by the way
this is amazing . so how much the customer will pay for this wash , alot of thing to use and very carefully .
The first thing you should do is take your Dyson V15 vacuum, and vacuum the mats, so no dust, and dirt can escape onto the carpet, your floor, nor driveway. We have to always be clean. P.K.
FYI... I used TW Hybrid Ceramic Polish/Wax on black GMC paint, and it turned out fantastic...
Great tips Sydni!
So Bead Maker with a Clay Towel decontaminates the paintwork if the car is wet?
You can use almost anything with a clay towel for mechanical decontamination. Whatever spray/liquid you use is just to provide lubrication for the clay towel to glide around on the surface, the clay towel itself is what is doing the decontamination.
Question: I love the idea of Absolute being used in a steamer, so I just bought both for car detailing. Do you leave Absolute in your steamer 24/7? I would love to leave Absolute in my brand new McCulloch steamer 24/7 and not worry about a side effect that would ruin and/or shorten the life of my steamer. And if I can, I’m assuming 256:1.
Yes 256:1. I can only tell you my experience but absolute has basically lived in my steamer for 2 years and I’ve never had to do white vinegar therapy, and have had zero clogging issues.
Before absolute I clogged and blocked steamers constantly with hard water
@@sbgthedetailer Thank you so much! And yes, that’s what I was wanting to hear. lol
@sbgthedetailer that's why you use distilled water in your steamer
@@dalebyers9877 I only ever use distilled water
Finger nail game is always on point!
#always
Well done video. I expected a long video to take forever but you did such a good job of describing what you were doing it worked great. What is No Rub please?
It’s an aerosol dressing, it self levels and doesn’t require wiping in most cases. Great for tight spaces and touch ups
I just picked some up to see how it works! @@sbgthedetailer
@@VictorHernandez-nt3twawesome!!! You’re gonna love it
Matt black wheels look good. Keeping them looking like new is a pain. Or a good wheel cleaner. Chemical manufacturers should focus on this. A quick efficient cleaner.
That’s a great idea in theory. I think the issue would be too light of a cleaner isn’t going to get them very clean. That’s a difficult product to make, any time you combine two functions you lose a lot of power of both products. This method works very well for me 😊
P&S Cockpit is a product I'm not too familiar with. Why Cockpit over Xpress Interior cleaner?
It’s a little stronger yes and a different smell
Such an amazing video. I love P&S products I have about 85% of P&S product line. I do need some advise please. I have the exact same steamer but for some reaon mine spits water off and on the entire time I'm using it. Is this normal? I use distilled water and took your advise and used one half cap of Absolute. I steam outside of the car when I start but it still spits water during use. I really cant affo😮rd to buy a more expensive steamer I purchased mine after seeing yours. I appreciate any help, I have no idea what I'm doing wrong. Thank you for all you do for the detailing community. Have a wonderful weekend.
Do you have the pressure dial all the way up? Only other thing I can think is it’s clogged
You could try running 1:1 white vinegar through it
Or purchase a new hose portion
From the business side, since you are using your home garage, what did you do from the insurance perspective?
Hi Sidney🖐
How did you treat the steering wheel? What products would you use on it?
Thanks!!..😎
I still used swift because it’s such a light protectant that it treats the leather but doesn’t leave anything sticky or slippery behind
Excelent job!!!
I so wish that I could have continued running my business out of my garage but the city I lived in strongly prohibited it. So frustrating.
Nice content , enjoyed the longer format,
If you was going to add iron buster into this would you put it in before the reset towel and bead maker? Or how would it have changed the process? Last adding the defender over the clay and seal with bead maker what kind of protection time do you get out of this? I understand it’s a range depending on treatment but what do you tell your customer the range is
Thx
Iron buster would be prior to the wash- spray- let bleed wash as normal then clay & seal
I see 12-18 months out of this process
BANGER….
🎉😂thank you!
I wish I could just summon a Tony like that on my details.
He great!
Great job form a great girl,
Do you clean the headliner? Steam it? Anything?
The Blue & White R53 in the background 😍😍😍
That sweet little thing. It’s coming out soon and getting cleaned up. It’s been banned to the shop during road construction this summer.
This was awesome. I enjoyed watching it. Thanks Sydni for showing us your process!
So glad you liked it! Can’t wait to share more processes with you all!
Thank you for watching!!!!
What a great video! Learned a lot thx Sydni..you are amazing. Thats a awesome setup in your garage too.
Thank You!!!
She turned out great.! 🙌
Thank you!
Hey Sydni is P&S cockpit like a heavier duty Xpress cleaner? I’ve been interested in trying it.
Yes a little heavier
I use cockpit full strength and Xpress 1:1
Then I know by product which one is full instead of having 2 bottles of Xpress
Honest question, doesnt the clay towel remove previous protection, I understand it removes contamination but just not sure.
Nice track hawk! Great job!
What was the tank you used to wet the suv?
Great tips and techniques.. thank you Sydni, Tony and a shoutout to the TRC video production crew!
Our pleasure!
Here’s a question. On a black car, how can you tell if iron remover is needed during decon stage?
Great tip using an applicator when doing the windows. I’ve never seen this one before and will be using this from now on. 👍
Love it!!!❤
Does the beadmaker make your drying towel less effective over time?
Yes and no. I do soak my towels in Rags to Riches every couple months and that keeps them working tippy top, but you can also spritz them with rags to riches diluted as soon as you’re done drying and then throw in basket and that helps a ton too.
Only if you don’t wash the towel with Rags to Riches Microfiber Detergent after your application
Nice tip I will start soaking for drying towels in Rags to Riches before washing! Thx
@@trigganometry168 using products like Bead maker will clog the towels but yes, soak prior to washing for that added insurance
Fantastic step-by-step video. Very educational. And I absolutely love the explanation of defender over the top of beadmaker before the bead maker has cured. Such a simple solution and fabulous final touch for you and the customer.
Glad you enjoyed it!
We need more of these from SBG! 🔥
What is the softest clay towel you offer at TRC? Didn't know beadmaker could be used as "clay lube". Love this! But want to reduce the chances of marring, therefore the softest I can find the better :)
The Clay Towels- both TRC Blue and the P&S Red are fine grade synthetic clay! They are the best choice for this process
@@sbgthedetailer Thank you!
Hi from England. Thanks Sydni, need more of these please? I particularly like your window cleaning tip!
We will make more detailing day in the life videos soon thanks for watching!
Thanks!!!
that was great, thanks Sydni. I learned some new techniques and need to buy more gear! :D
Thanks for watching!
What is the spray that you used on the gas cap and hard to reach door jam areas? 🇨🇦👍👍
No Rub
Shoutout to the TRC film crew. Sydni and Tony are goats
Sydni and Tony are the real MVPs! Thanks for watching!
Awesome! Sydni and Toni did a beautiful job! Truck looks amazing!!!!
Thank You!!
This was great Sydni ,fellow garage detailer as well. The Rag Co. did a great job capturing the whole process and you along with Tony did awesome. Thanks for the content and appreciate you bringing us along for the detail , vehicle came out great.
Thank you!!
Sydni do you still do rinse-less washes on non maintenance vehicles? What’s your process for more soiled vehicles?
Yes and I use a detail keg for pre spray, or if it’s dirty enough I still pressure wash prior
I am going to call a foul and throw a yellow flag for the many non-label use of products in ways they are not sold, or commercialized. Just because I can use a microfiber towel to hold food does not make them plates.
Huh?
@@barrycook8116 Is HUH a new brand of car shampoo?
Huh?
@@barrycook8116 Besides asking again with a HUH? Anything else?
Wasn't expecting the Ramen part hehe.
😂😂 important part of detailing at home
Great video. Very informative and detailed. lol. Ok so my question is what were you spraying on the carpets before you vacuum? Thank you
Paint Gloss. its a quick detailer, but it is an anti static so it speeds up the vacumm process and refreshes carpet. Just 1-2 sprays per area. Makes a huge difference with dog hair or sand.
Incredibly impressive work. I'm just an OCD hobbyist, so these videos are very helpful. Much appreciated.
Fantastic!! 🎉 thanks for the comment
What kind of applicator do u use for the glass?
What type of steamer do you use great video 😊
I wouldn’t be able to to perform that decontamination step on the truck roof top. Are you able to
Yes I have 2 tall step platforms
Question sydni… when you do the deep cleaning with bead maker and that red clay square rug… don’t you scratch the car??? I’m always been afraid to do that step but I see you go all over the car with it…. Plus you said it gives it a shine… nice tip!
Absolutely not, it’s fine grade synthetic clay and we’re using Bead Maker as the Lube and Sealant- so no marring is caused.
You would not use traditional clay bar without polishing but the clay towels and sponges are designed to be able to be used with out polishing
@@sbgthedetailer awesome!! Ima try it.
Looking forward for more videos on your TH-cam channel!! 🔥🔥
@@antonyllamocca1635let me know how it goes!! I live by this process
Goated Video 🐐
Haha thanks Jamie
Sydni that was a Mr. Roger’s entrance. Did Dane put you up to that?
Haha Nope
How long total did this detail job take?
Because we were filming it was about 5 hours but typically with no interruptions I might be around 3 hours for a maintenance detail like this
@@sbgthedetailer that's great! 5 hours still isn't bad without filming. 3 is awesome for this giant car!
I am sorry think I missed what you use as a vacum aide could you share the link. Nice video! Thank you
P&S Paint Gloss. It’s an anti static
Great vid! Very informative! Loved all the tips and off label uses! One question though... What protectant was used on the mats? I went back and watched it again to make sure I didn't just miss it being said.
It would have either been Natural Finish or lately I’ve been stuck on Full Send
Good day my dear. Do you have the model number to your steamer?
THANK YOU
Tell me more about your vacuum set-up please...
Extra large (high lift) central vac with hose retraction system called Retractavac - hose is sucked up in to the ceiling pipes for storage
Great video! What is that cylindrical cannister at 21:17?
What is it that you’re using as a vacuum aid? What does it do?
P&S Paint Gloss
It’s an anti static
What products did you use
They’re all linked to the video
Yes do you have a page with all your details
Thank you for all the amazing tips. What brand of dust vac brush do you use and where coukd I get one? I tried several and jjat cant find one I like either not liking the bristles or the angle. Your vac brush attachment looks amazing I would love to try one. Have a wonderful week.
What is that vacuum setup? That looks so handy!
High volume central
Vac with the hose being the retract a vac system
Hmm, what was that grey sponge like um, sponge that you used to wash the car?
USS (ultra safe sponge) from TRC
Thank you for the video
It's good to see how it's done.
You are welcome! Thanks for watching
What do you use on rubber floor mats non slip
Natural Finish, Bake in Sun. Wipe off necessary but generally it absorbs it all
What vacuum hose setup is that?
It’s a central vac with about 160 lift and then the hose is the retract-a-vac. It was about $600 installed and is the absolute best $600 I’ve ever spent! It’s soo great.
What brand of steamer was that, thanks
McCullough 1385
She literally says it right in the video
What kind of absolute or which absolute do you used in the steamer
P&S currently only has one Absolute Rinseless Wash. its diluted 256:1 in the steamer
@@sbgthedetailer so you do put rinseless wash in the steamer?
Love this, I’m the same type of detailer
Glad to hear we have some fellow garage detailers in our audience. Thanks for watching!
awesome!
Great video
Thanks for all the pro tips will help a lot
Thanks for watching!
Glad you got some helpful tips from it, thanks for watching!
What do you charge for that detail 🤔
Between 3-350
Do you clean the Seatbelts, Sydni?
How much water I could add to the steamer you have
I’m not sure, I usually add about 2-3 cups but I think the capacity is larger
Which in wall vacuum system is that one?
It's called central vac by Coltrin with an added retraction setup.
Yep, hose is called RetractaVac
Did we miss the wheel cleaning? Went straight to dressing?
Yes unfortunately, if you noticed the trucks in the driveway, I had contruction going on in the house and they had the water turned off so I actually had to clean the wheels before Jimmy could get there 😢 but I used crystal wash and brake buster, DF brushes, mud buster in the wheel wells and rinsed everything with Pressure Washer
@sbgthedetailer thanks, I did notice the workers. I was interested in the products used. Appreciate it!
What is Sydneys deatiling business name? She has a website?
No website 🤪 I have run my business solely on referral basis and no advertising. Business name is iWash Auto Detailing but under handle SBGtheDetailer on all platforms
@@sbgthedetailer awesome. Same here! No website but just do it on weekends by word of mouth. I do engineering and mfg. As ny full-time job.
Smart lady right off for the house and good for your taxes gg
What is the bug rag? TRC sell that?
Yes. Jersey Bug Scrubber! Must have
Is that the same as a ninja scrub it whatever they called ?
@@MichaelBoouch no, that’s an interior scrubber. It’s the Jersey Bug Scrubber
@@sbgthedetailer I just ordered a bunch of micro from trc and the jersey bug scrubbers came with the kit. So I can’t use them for interior ?
So sorry, I wasn’t the clear 😅 the Scrub Ninja you mentioned is an interior scrub pad and has material you wouldn’t use on the exterior
The jersey bug scrubber is only for bugs and wouldn’t be used on interiors
How do you run your detail business out of your garage without it being commercial property ?
Does your city’s zoning laws allow you to legally work out of your garage? My city’s laws do not allow this.
Yes, I have a home occupation permit. My neighborhood is permitted for home business because of its location. Areas vary so you definitely need to make sure you can legally operate out of garage