ฝัง
- เผยแพร่เมื่อ 14 ม.ค. 2018
- Quick Video of me building a new soundproof enclosure for my Bitmain S9 Antminer
Sorry for the Shutterstock royalty free music
Materials Used:
1x 52 QUart Igloo Cooler
2x 4" Dryer Draft Blocker
1x Box of 25FT Dundas Jafine 4" Class 1 Air duct -
amzn.to/2sTuNGs
1x Dundas Jafine BTD48TC 4" Dryer Duct - amzn.to/2opQAAV
1x Roll of Foil Insulation Tape
2x 120MM Fan to 4" Duct Shroud - ebay.to/2F0FUSV
1x Screen Door Patching sheet
A Majority of the items were purchased at Lowe's - วิทยาศาสตร์และเทคโนโลยี
What was real painful was the stupid music
Honey ... the beer is getting warm .. I'll go get some ice ... can you find the shutterstock?
I mean the cooler?
What's that big piece thing you used to drill the big hole called? you have a link to buy
In the begining I maybe would have considered screwing the hose attachment into a flange that protrudes around the the fan an extra inch so that you dont have a narrowing duct for the air
You need a high speed ele. drill when using Whole Saws.
*SHUTTERSTOCK MUSIC*
LOL
put a hashtag by that bitch
🤣🤣🤣🤣
SHUTTERSTOCK MUSIC
👍👍👍👍 great job !!
I made this as well a while ago... one thing I noticed tho was the internal temperature increased to around 100 degree celcius, and thus the machine would shutdown after an hour or so at that temperature. Could never get it past that. So I only turn it on now when I'm away
I no longer have this setup, but when it was setup, I had a tube connected directly to the miner pushing cool air in while the other end was connected and blowing hot air out. It kept the heat flowing directly through the miner rather than collecting inside the cooler.
What setup did you move to?
Can you do step by step explanation?
To be clear -- a hole saw is used here, and is not listed in the required tools.
I have Questions that I would very much appreciate if you answered.. why did u leave the PSU outside of the box and not inside? What's the db with the box and without it? How hot does it get when it's in the box vs when not?
Thanks alot!
I wanted the PSU outside of the box so I could connect it to an outlet easier. If needed it would also allow me to swap it easier as well in case I needed to replace it. Plus the PSU adds additional heat. It's quiet so I don't need to put it in the box which is the purpose of the box.
dB is upwards of 75dB to 80dB without the box. With the box it is virtually cut in half to 45dB. Huge difference when you are a home miner.
The heat in the box stays at a relative temp depending on the temperature that is being blown in the box. All heat is pushed out through the tubes. Typically when inside and outside of the box it stays around 70 degrees F
Thanks alot! What would you do in the summer heat to keep the temp low? Sticking one side of the tube outside maybe? Or it's fine to keep it inside
I usually route the tube out the window. Lately though, I just placed the entire setup in the garage.
Can you possibly list all the materials you used? Thanks in advance.
I have most of the details on my steemit post
steemit.com/bitcoin/@cloh76/building-a-soundproof-enclosure-for-my-bitmain-s9-bitcoin-antminer-my-building-journey-video-included
I will add them to the description above
what are those bracket things called with the nice hole in it? i'd like to buy that somewhere
Which Bracket things? The white ones that I connect the tubing to? If so, they are called draft blockers which I got from Lowe's
www.lowes.com/pl/Dryer-vent-draft-blockers-Dryer-vents-accessories-Ventilation-Building-supplies/4294512310
nice job.
what about the temperature? is it difference without enclosure?
the temperature remains pretty constant since im blowing cool air into it and then in turn blowing it out. It is really meant to reduce the noise :)
how did this work in the long run please? I need to build one but want to know if its safe for the miner please. Thanks
Brad Boyd old video, but it worked well. As long as you have cool air flowing into it. I still have the S9 and it still works perfectly. I no longer have the cooler and housing though.
Hey, nice work on the design. I just have a question for you. What was size and length of the screws you were using when you added the duct to the back of the miner??
wow. Thanks. That was so long ago, but I think I was using the included screws from the miner itself if I remember correctly.
@@ChrisLoh okay thanks
Soooo any update on the sound quality? trashed it or useing it still?
I have ordered the new S9 Hydro which is water cooled so will eventually replace my existing S9s and will no longer need this. Using this reduces your dB by 20dB
Shutterstock music !
Nice job, although I must say it was painful watching you struggle without the correct and poor quality tools lol!
it was painful using them :) Im working on buying a new set!
Like which tool?
what are the DBM differences?
You get about a 20dB difference.
cant hear how nosier it is or isn't
"show" effect
Yeah, i think im definatley going to get a Shutterstock, er .... i mean Antminer* bzzzzzz
I keep hearing a message thru the video
That's God talking. He says go forth and and mine Bitcoin
yea. SHUTTERSTOCK MUSIC. Royalty free music...
Next time go Jamendo, that was annoying enough to mute it.
SHUTTERSTOCK MUSIC! ........................SHUTTERSTOCK MUSIC!..................SHUTTERSTOCK MUSIC!
Shutterstock music lmfao
Very nice get a better tool man
Yea. I definitely need to do that!
Learn to time lapse, you lost me when it took a WHOLE MINUTE to drill a hole in the Esky.
Thanks for the Feedback
*SHUTTERSTOCK MUSIC*