@@Talbot_Industries Ok, thank you anyway. Do you have an idea where i can get some measurements or technical drawings of the flywheel? Perkins would not give me those... I bought the same skidsteer as you did but it came without an flywheel....
@@alexmaier2915 most should be an SAE layout. i believe the perkins uses an SAE 4. (measure it) www.sbmar.com/articles/understanding-bellhousing-and-flywheel-measurements/ has all the details. just need to measure the bore and bolt pattern to connect to the crank and have a ring gear.
Hi I have the same engine, I need to buy a head gasket but can’t buy one with out knowing the serial number on the engine block and I can’t find it. They say it’s on the left side but I can’t find it nowhere. If you could help I would appreciate it. The engine is still in the skid steer and it’s hard to see on the sides of the engine. Thanks don h
Hi I have the same skidsteer and was considering repowering it. Can I get your email address to discuss this further? I really like what you have done here!! Thx Randy
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
Hi, do you know it, what engine had got the GEHL 2625 before Serial Number 8868? There was a switch with the Engine. Thank You!
Have any parts from the old engine by chance? Need a few odd parts off of one
all i have is the crank. sorry
Que motor usa el minicargador GEHL 5625 S X
I gotta do the same thing. The s/l i got has a oil cooled deutz. Smokes bad and burns bunch of oil. Wanna put liquid cooled engine in.
Hello. Do you still have the old engine parts of the perkins? I need a flywheel for a 204-25....
few months late. sorry i do not
@@Talbot_Industries Ok, thank you anyway. Do you have an idea where i can get some measurements or technical drawings of the flywheel? Perkins would not give me those... I bought the same skidsteer as you did but it came without an flywheel....
@@alexmaier2915 most should be an SAE layout. i believe the perkins uses an SAE 4. (measure it) www.sbmar.com/articles/understanding-bellhousing-and-flywheel-measurements/ has all the details. just need to measure the bore and bolt pattern to connect to the crank and have a ring gear.
Hi I have the same engine, I need to buy a head gasket but can’t buy one with out knowing the serial number on the engine block and I can’t find it. They say it’s on the left side but I can’t find it nowhere. If you could help I would appreciate it. The engine is still in the skid steer and it’s hard to see on the sides of the engine. Thanks don h
Don, are you looking for serial number from the perkins or from the cummins?
On the Perkins, thanks
@@donhirschfield2560 xa129924 is the only thing i have saved in my notes from the old engine. maxda xa is the same as the perkins
@@Talbot_Industries can tell me where are the serial number located on the block I can’t find it. Sorry about all the confusion. Thanks Don H
Nice job
Will this work on a ctl60?
im not familiar with that model but just about anything is possible. i would try to match HP specs though
Hi I have the same skidsteer and was considering repowering it. Can I get your email address to discuss this further? I really like what you have done here!! Thx Randy
Shoot me a message on Instagram @kyletalbot_01
@@Talbot_Industries I'm not on instagram yet so I will have to set it up.
Thinking of getting this exact model..
For 13k.2500.. good deal?