Nice project! It reminded me of a project i made back in 1987, it was a guitar size plastic glass synth, with bunch of square wave oscillators and three LEDs, red, green and yellow turned around in circles by a small motor while powered from oscillators. It made nice stroboscopic effect of lights running around with correction in speed to change in frequency of sounds
Amazing job! The microcontroller and display on the back is such a great idea. I'm currently designing a guitar for 3D printing. I'd be keen to hear what you would change if you were to start over again?
Thanks! I think I may reprint the center part of the guitar at some stage with higher infill as it's slightly bending under the stress of the strings. Other than that, I'd like to make the headstock light up but I'd pretty much need to make a neck to do that. I'll probably add a DAC to the electronics at some point too so I can add distortion and other effects via the little display on the back of the guitar.
@@joshendy That's a shame about the body bending. Most of the other builds I've seen used a 100% infill for the body block - I'd hate to think how long that would take to print. Onboard effects would be great to see - especially if you could incorporate controls such as an XY pad like Matt Bellamy does to control different parameters. Well done on the build.
Honestly I love the shape I would have given the edges a bit more bevel for comfort cuz it looks a little sharp to my eyes but other than that friggin bravo dude.
@@joshendy Fantastic. I'm definitely interested. I like that you've used a 24 fret Jackson or Ibanez style neck rather than a Strat neck too. I'd need to work out some way of splitting to print on an Ender 3. I'd imagine most people don't have access to print on a 300 x 300 printer. Anyway, I've followed you on Reddit so be sure to post there when plans are available. 👍
Hope you are doing well amidst this pandemic craziness. If you haven't already I'd love a link to the etsy page to buy the stls and give myself a little project while isolation bores me to death lol
hi man, how did you stop the pwm noise???? i have put addressable leds (w2812b strip) in my guitar neck, and the noise is beyond terrible.... how do you overcome this. thanks, nice work btw dude.
possible to get designs for this model? I like the interlocking pieces which other designs online dont have, besides one which has an irregular neck design
It only responds to what's being played on the guitar as it senses the output of the guitar directly from its pickup that generates voltages when the guitar strings vibrate.
I wish! No unfortunately it's a cheap pickup that I got from Aliexpress. This was kind of an experiment at first but now I know it all works I'll start upgrading the parts. Starting with the pickup!
Thanks! The largest part can only fit on a 300x300mm bed and only still when rotated 45 degrees. It's possible to chop it up to fit even on a tiny 3D printer it'd just require a lot of glue and careful alignment.
JOSH MUST BE IN TROUBLE BECAUSE HE DOESN'T RESPOND TO ANYONE ON TH-cam. I'M FROM BRAZIL, RIO DE JANEIRO, CAPITAL AND I WOULD ALSO LIKE TO BUY THE PROJECT AS A GIFT TO A FRIEND OF A SUPER FAMOUS BAND HERE IN BRAZIL WITH MORE THAN 40 YEARS OF SUCCESS. 👌
JOSH MUST BE IN TROUBLE BECAUSE HE DOESN'T RESPOND TO ANYONE ON TH-cam. I'M FROM BRAZIL, RIO DE JANEIRO, CAPITAL AND I WOULD ALSO LIKE TO BUY THE PROJECT AS A GIFT TO A FRIEND OF A SUPER FAMOUS BAND HERE IN BRAZIL WITH MORE THAN 40 YEARS OF SUCCESS
I 3D printed an entire es335 neck included. I did the neck in CFPETG and added a strut rod. Here is a tweet with pic. It is now strung but sadly I don’t play. twitter.com/nak3ddesigns/status/1290336542729416704?s=21
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
I think one of the most important factors that might get overlooked is the fact that this goes up to 11, one more unit of light than the others. 🤘
assuming there are "others" guitar with lights at all
i'm not interested in guitars but i am interested in 3D printing and electronics. this is bloody awesome.
I am into guitars, not 3d printing or electronics so much,.. but i got some friends that r!! 😁🤘👍 Hopefully they can assist
10:47 "Most light up guitars only go to ten. This one goes to eleven". Metal.
Hell yes! Finally someone with some taste in music!!!!
Hi Josh! It’s me Mia, good thing I got to see it in real life, I heard that your famous all over America and more! GJ bud.
Hehe thanks Mia!!
Hi, I really loved this project! I wonder if you're gonna publish the files so everyone can make their own
Should be more popular honestly this video was so great and your work is amazing
Nice project! It reminded me of a project i made back in 1987, it was a guitar size plastic glass synth, with bunch of square wave oscillators and three LEDs, red, green and yellow turned around in circles by a small motor while powered from oscillators. It made nice stroboscopic effect of lights running around with correction in speed to change in frequency of sounds
"If it's worth doing, it's worth using too many bolts" screams in starbase T-T
Any video that starts with Number of the Beast gets my attention!
lights instantly make things cooler!
Marvellous engineering and product design
Followed your link from reddit. Thank you for warning about loud noise.
Great job sir! I'm a guitarist and 3D printer enthusiast, (and Aeromodeller) so... Little bit jealous!!! Well done...
Amazing job! The microcontroller and display on the back is such a great idea. I'm currently designing a guitar for 3D printing. I'd be keen to hear what you would change if you were to start over again?
Thanks! I think I may reprint the center part of the guitar at some stage with higher infill as it's slightly bending under the stress of the strings. Other than that, I'd like to make the headstock light up but I'd pretty much need to make a neck to do that. I'll probably add a DAC to the electronics at some point too so I can add distortion and other effects via the little display on the back of the guitar.
@@joshendy That's a shame about the body bending. Most of the other builds I've seen used a 100% infill for the body block - I'd hate to think how long that would take to print. Onboard effects would be great to see - especially if you could incorporate controls such as an XY pad like Matt Bellamy does to control different parameters. Well done on the build.
It goes up to eleven! :D Awesome project, looks really cool.
That's sick. One of the coolest guitars out there for sure.
All the way to eleven XD playing with some serious power , GG man great job!
Bro, I think you may be some kind of genius! Are the print files available anywhere?
Great project, execution, and video. I also enjoyed the shout outs to Ivan Miranda, Dave Jones, and Spinal Tap. I'm sure I missed others.
Thanks! I'm glad soneone noticed the references!
Wow!! Well done. Those electronics are amazing. Your planning is impeccable.
Brilliant !!! I want one !
Reprint truss rod cover in black... Would look really choice!
Mate that's fantastic! I feel like printing one for myself but I haven't played in years. Well done!
Very nicely done. Great work.
Honestly I love the shape I would have given the edges a bit more bevel for comfort cuz it looks a little sharp to my eyes but other than that friggin bravo dude.
hahaha! Brilliant! It goes to 11. That's one more than 10 isn't it?
Yeah so it's 1 louder than the loudest!
beautiful!!
what pros & cons have you encountered with sound quality, durability, etc?
Awesome guitar!
THIS IS SO AMAZING! KEEP MAKING VIDEOS AND GUITARS!
Very cool! Well done, it looks great!
I've been doing some similar stuff with ukuleles, so I know how much work went into this. Amazing job mate.
🤩🥳
Very cool. Wish you had covered the guitar parts more bridge pickups nevk specs etc.
How much you want for it 🙃 I'd love to have this for Christmas 🎄
this is sooooo cool OMG
when you used the iron to push in the thread inserts in actually said "fucking genius" out loud
This is amazing. Best design for a 3D printed guitar I've seen, even without all the electronics. Any plans to sell the design / build instructions?
Thank you! Yes I think I will work on some instructions and sell the plans and 3D models on etsy
@@joshendy Fantastic. I'm definitely interested. I like that you've used a 24 fret Jackson or Ibanez style neck rather than a Strat neck too.
I'd need to work out some way of splitting to print on an Ender 3. I'd imagine most people don't have access to print on a 300 x 300 printer.
Anyway, I've followed you on Reddit so be sure to post there when plans are available. 👍
Exactly what I wanted to write down : wonderful 3d printed design !
@@joshendy please do. id like to get started on this asap
@@joshendy that thing is bloody awesome! Did you end up putting the plans on Etsy and could you share a link?
great build, any chance of sharing the files for the body. I would love to have a go at this.
cool video bro \m/
My friend you must be putting the fog machine in it right now
Hope you are doing well amidst this pandemic craziness. If you haven't already I'd love a link to the etsy page to buy the stls and give myself a little project while isolation bores me to death lol
hi man, how did you stop the pwm noise???? i have put addressable leds (w2812b strip) in my guitar neck, and the noise is beyond terrible.... how do you overcome this. thanks, nice work btw dude.
very cool
possible to get designs for this model? I like the interlocking pieces which other designs online dont have, besides one which has an irregular neck design
Would you make an sell one without the light?
does the guitar respond to ambient noise and or music besides what you play? i think it is great. kudos to you! thanks for posting
It only responds to what's being played on the guitar as it senses the output of the guitar directly from its pickup that generates voltages when the guitar strings vibrate.
Dude I want one ! XD If you start taking orders I wanna be the first one.
How's the tuning stability after a few weeks ?
Stays as well in tune as my LTD guitar which is quite surprising! ABS is quite a stiff plastic (think about how strong a little lego block is).
Sick!
I like the Strandberg shape. Would making this headless like a Strandberg need any adjustments or just different hardware?
Is that a DiMarzio X2N pickup near the bridge? Amazing design, love it!
I wish! No unfortunately it's a cheap pickup that I got from Aliexpress. This was kind of an experiment at first but now I know it all works I'll start upgrading the parts. Starting with the pickup!
so I can 3D print, do you sell the kit for the rest of the parts? would love to make this for my son!
Hi Josh, Where can I find the STL and The PArts list?
You could program in a metronome mode.
This is awesome mate! I want to build one, what is the dimension of the biggest printed part? I have a tini tiny 3d printer.
Thanks! The largest part can only fit on a 300x300mm bed and only still when rotated 45 degrees. It's possible to chop it up to fit even on a tiny 3D printer it'd just require a lot of glue and careful alignment.
awesome
Would you be willing to share the STL files for your guitar?
What neck is that ? looks like an Ibanez ?
I think you should have 3d printed the neck
Can you release the STL?
Will you be sharing the STL files? Asking for a friend. :P
I think I'll write up some plans/instructions and sell those along with the STL files for relatively cheap when I get some time
@@joshendy when?
@@joshendy Any chance you've released the etsy plans? I'd love to build this
@@reeceaqua2336 I second that- the lead guitar player for my wife's non-profit's accompaniment band -LOVED- this and wants me to build him one.
bonjour très jolie ou trouver les fichiers merci
Bill lawrence pickup?
No it's just a cheap clone off aliexpress. I need to upgrade it badly!
How can I get the model?!
3d print some toan
Seriously sick tho man
Got to be a New Zealander, man we sound so strange after listening to Americans etc.
Haha yep, I'm in Wellington. Took a while to get a nice day to get that outdoor footage!
Hey Josh, i have sent you an email about thus vid!
pity that you didnt enlightened fretboard also 😅
Ok
Please host a party, turn off all the lights, and play ‘through the fire and flames’ with that and no context.
JOSH MUST BE IN TROUBLE BECAUSE HE DOESN'T RESPOND TO ANYONE ON TH-cam. I'M FROM BRAZIL, RIO DE JANEIRO, CAPITAL AND I WOULD ALSO LIKE TO BUY THE PROJECT AS A GIFT TO A FRIEND OF A SUPER FAMOUS BAND HERE IN BRAZIL WITH MORE THAN 40 YEARS OF SUCCESS. 👌
JOSH MUST BE IN TROUBLE BECAUSE HE DOESN'T RESPOND TO ANYONE ON TH-cam. I'M FROM BRAZIL, RIO DE JANEIRO, CAPITAL AND I WOULD ALSO LIKE TO BUY THE PROJECT AS A GIFT TO A FRIEND OF A SUPER FAMOUS BAND HERE IN BRAZIL WITH MORE THAN 40 YEARS OF SUCCESS
I 3D printed an entire es335 neck included. I did the neck in CFPETG and added a strut rod. Here is a tweet with pic. It is now strung but sadly I don’t play. twitter.com/nak3ddesigns/status/1290336542729416704?s=21