Does anyone know if there are any design features of the build that allow retractable landing gear to be installed? For me the takeoff roll and the landing are some of the most enjoyable parts of the flight experience.
This is my first master build. It went ok but it's not done yet. I am a visual person. The vertical stabilizer and copy build as well as gluing the trailing edge are not in the video. I'm sure I will figure it out but I have also built several FT planes.
1:03:00 to 1:05:00 does the fuselodge need to be cut so that the wing spar can go down or no? At the start, you had it pushed all the way down the slot. But at the gluing part, it is above.
Just made it to the point of Setting up ECS. Can the ECS's be in the hidden belly Compartment or do they need to be all the way up by battery Compartment for CG ?
Any benefit to flaperons F18? Can you just use a Y cable for ESC or do I need 1 channel for each ( see no benefit for differential thrust as thrust tubes are so close
If you wanna do alien like maneuvers and pull crazy AOA sure. Just make sure your craft can withstand the crazy g’s this airframe can pull. If everything is the right dimensions I would assume it would be able to pull the same g’s the real thing can which is way more than the airframe can handle. Would be really cool if someone figured out how to put a g limiter on the rc model
I personally haven't found a flight video for this model, just the build video. it's like these guys want someone else to film the flight video and tag them in the description, which I advise someone to do, otherwise it's not happening.
Sounds like something isnt assembled correctly, shoot some pics over to Flite Test tech support. I can get you goung ince I have a better idea whats going on.
flitetest must sell this kit again!!!!
Is this the whole build video or is there other parts?
52:00 wait how did he get that whole front or maybe back part idk still are we just supposed to do tit with no instruction
What type of paint do you use.
Is it OK to use Latex caulking to seal up the exposed foam edges?
Does anyone know if there are any design features of the build that allow retractable landing gear to be installed? For me the takeoff roll and the landing are some of the most enjoyable parts of the flight experience.
There ia room, though no provisions have been made for modificarion.
I'm finishing mine up. What kind/color of spray paint did you use for painting? Thanks again! Tony
This is my first master build. It went ok but it's not done yet. I am a visual person. The vertical stabilizer and copy build as well as gluing the trailing edge are not in the video. I'm sure I will figure it out but I have also built several FT planes.
Canopy not copy build
The vertical stabilizer is covered in the horizontal and vertical stabilizer video in this playlist. The trailing edge is left open on main wing
The canopy constructuon is civered in the misc video located in this playlist.
1:03:00 to 1:05:00 does the fuselodge need to be cut so that the wing spar can go down or no? At the start, you had it pushed all the way down the slot. But at the gluing part, it is above.
Just cut where the dotted lines are, dont press it down any further.. It looks deeper than it needs to be in the video.
@@trieditathome4116 so leave it the way it is and don't follow what he did cuttin the fuselodge so the spar goes all the way down?
yes, only cut where the dotted line is
@@trieditathome4116do you have plans or kit for sale for F-18?
Just an idea when attaching canopy place blue tape on vinyl and glue on canopy so attachment is definite and blue tape will protect vinyl...
Where is the info on servo settings and control throws
Just made it to the point of Setting up ECS. Can the ECS's be in the hidden belly Compartment or do they need to be all the way up by battery Compartment for CG ?
Can you give the PDF plans?
Planlar konusunda bilgi edinebildiniz mi? Benimle de paylaşabilir misiniz?
does it come with all the electronic ?
This guy is a beast cutting those bevels.
Is there going to be a plan for this soon please?
Any benefit to flaperons F18? Can you just use a Y cable for ESC or do I need 1 channel for each ( see no benefit for differential thrust as thrust tubes are so close
You can Y the EDFs. I have not tried this with elevons
If you wanna do alien like maneuvers and pull crazy AOA sure. Just make sure your craft can withstand the crazy g’s this airframe can pull. If everything is the right dimensions I would assume it would be able to pull the same g’s the real thing can which is way more than the airframe can handle. Would be really cool if someone figured out how to put a g limiter on the rc model
What are all the parts I need for this? Servos, motors?
70mm twin Edfs full 17g metal gear servos
Twin 80 amp escs
What kind of clear tape is that? Seemed like it was way thicker than normal packing tape.
Its clear gorilla tape
hello john, how are you? Is it possible to get the floor plan of this model with these details that you present in this video?
Sorry. these are inly available as a speed build kit
@@trieditathome4116 I understand, but it's because buying there and sending it here to Brazil is very expensive.
Do you buy motors separately?
Is this kit available, I looked on the website and could not find it
They just started the first production runs a couple days ago. Give them a little time to get to the store.
THX for all your great work!!
Is there a working link to the kit??
Yes there is, one of the assembly, and ver 2 remod.
Did I miss the flight video of this plane or is it not out yet?
I personally haven't found a flight video for this model, just the build video. it's like these guys want someone else to film the flight video and tag them in the description, which I advise someone to do, otherwise it's not happening.
@@jameshamaker9321 does it has the plan?
How long is the thrust tube suppose to be?
Its included with the kit
@@trieditathome4116 yes I have 2. And there sticking out the back a good 1.5 inches.. that is the norm for this rc jet, 2 inch diameter?
Sounds like something isnt assembled correctly, shoot some pics over to Flite Test tech support. I can get you goung ince I have a better idea whats going on.
@@trieditathome4116 ok I figured it out, I still need to glue on one more part to exhaust tube.
Where are the instructions for assembling the EDF tube?
Might be late but yeah there is. On the channel there’s a playlist with more helpful videos
こんにちは。
初めまして。
発泡スチロールみたいなのは(中が白くて外が茶色の商品のことです)…なんという商品名ですか？
教えてください。m(_ _)m
version two, idea retractable wheels. I'm sure half a dozen people in the comment section, have already posted this, by now.
Would be cool to build it and do a turbine conversion 😅
34.30 that looks to have a lot of unwanted strain on that small servo,not a straight run at all.
I'm building an rc B-25J Mitchell as I'm watching this video
Most of my spray coating looks like your 3rd coat. I'll have to learn to spray lighter first and second coats.
I will do 4-6 coats in many cases
Does this have a scratch kit download available
More than 2 years ago, FT stopped releasing Master Series plans. (Edited)
@@AddictedRC what? Yes they do I've built a couple and this does as well
@@malm4640 They stopped releasing MS plans more than 2 years ago.
@@AddictedRC erm they literally said in the other video that it has build plans
@@malm4640 Post a link to the plans. Good Luck!
For a plane this big, I'm surprised that a half-inch of BBQ skewer and a bit of hot glue is all that's needed to hold on the vertical stabilizers.
22:03 “our foreskin”
i hope i can build one but this is so expensive
Mantaaaap
do a f 14 tomcat
Bro please make tejas fighter jet
Can any one else see it falling apart in flight
Why there is no pdf
I was subscribe to your channel for 3 years but you disappointed me to much with this
And the end? :/ ,, it is so heavy! It wastes power , not a useful and high performance design
Its not heavtyat all. This EDF will fly 7 minutes on a 5200 mAh 6s.
Вау
No engine 🤣🤣🤣🤣🤣🤣
Good vid, but some of your gluing techniques to me are rather sloppy.