I'm thinking of doing that kind of set up on my '99 Ranger 3.0 but with a Flowmaster Super 10 how much did it cost to make that set up? I also want to use the 3.8 Mustang headers cause the JBA headers are extremely hard to find also you're still on the stock manifold?
I’m sorry for a late reply. It cost me somewhere around $500 for the piping and for the labor. I bought the muffler then too. This is set up with a 2000 ford Taurus intake manifold and mustang throttle body.
@zsgarages3885 damn also where can I get the Mustang 3.8 throttle body? 👀 cause I recently got a intake for mine but obviously for the 3.0, it only replaces the air box which is dumb & don't know where to find the rest of the tubing after the maf sensor also what size piping you currently have?
@@Jeremy_Hill_2020 I got my throttle body at a junkyard. Remember to grab the mustang cable as well so you can hook it up with the mustang throttle body. As for the rubber tube from the filter to the throttle body I just reused my stock one. It fits onto the mustang throttle body.
@@zsgarages3885 mine where it meets the throttle body, that part is broken & have to use duct tape to hold it so I need a new intake tube it somehow still works fine as is but needs to be replaced
Sorry I didn’t realize tbh that I didn’t rev it very much. I’ll probably go back and make a new video to better show it’s exhaust. Thanks for the advice!
Hey love the sound, I got a 2000 3.0 would love to have a similar setup just had a few questions. Is there a better way I could contact you? Instagram, Snapchat, etc?
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
The 3.0s sound so good
Sounds good
Guess you cant get rid of those cats where you live?
It sounds great though
Unfortunately I can not 😭
I'm thinking of doing that kind of set up on my '99 Ranger 3.0 but with a Flowmaster Super 10
how much did it cost to make that set up? I also want to use the 3.8 Mustang headers cause the JBA headers are extremely hard to find
also you're still on the stock manifold?
I’m sorry for a late reply. It cost me somewhere around $500 for the piping and for the labor. I bought the muffler then too. This is set up with a 2000 ford Taurus intake manifold and mustang throttle body.
@zsgarages3885 damn
also where can I get the Mustang 3.8 throttle body? 👀
cause I recently got a intake for mine but obviously for the 3.0, it only replaces the air box which is dumb & don't know where to find the rest of the tubing after the maf sensor
also what size piping you currently have?
@@Jeremy_Hill_2020 I got my throttle body at a junkyard. Remember to grab the mustang cable as well so you can hook it up with the mustang throttle body. As for the rubber tube from the filter to the throttle body I just reused my stock one. It fits onto the mustang throttle body.
@@zsgarages3885 mine where it meets the throttle body, that part is broken & have to use duct tape to hold it so I need a new intake tube
it somehow still works fine as is but needs to be replaced
@@Jeremy_Hill_2020 Dang! 😂 there seem to be a lot of Rangers at junkyards. I’d imagine that’d be an affordable option.
What year is the old intake you had before you swapped it
My intake was stock 2000. But I swapped the filter out for a spectre cone shaped filter
@@zsgarages3885 I have a 94 and where your x pipe is my two cats....I'm going to cut them out and do a single 2.5 45'd out the side
Sounds sweet!
Maybe u would have more subscribers if you actually rev the engine and let people hear the exhaust.
Sorry I didn’t realize tbh that I didn’t rev it very much. I’ll probably go back and make a new video to better show it’s exhaust. Thanks for the advice!
My ranger dont sound like that
Hey love the sound, I got a 2000 3.0 would love to have a similar setup just had a few questions. Is there a better way I could contact you? Instagram, Snapchat, etc?
You could follow me on Instagram @zs_garages sorry for the late reply