BRAND NEW ESC For My TRAXXAS MAXX

แชร์
ฝัง

ความคิดเห็น • 99

  • @gonzodetroitify
    @gonzodetroitify 2 ปีที่แล้ว +1

    Can’t wait for the run test Nolan
    Nice of you to share👊🏿

  • @joseywilds3133
    @joseywilds3133 2 ปีที่แล้ว +2

    Thanks for the video stay safe bro!

  • @keeginlablance859
    @keeginlablance859 2 ปีที่แล้ว +1

    Definitely looking forward to next time. I’m looking into swapping out my stock motor and esc in my Maxx.

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      Yeah the stock vxl4s isn’t very good….hopefully this system holds up 🤞

    • @Sqwidwood
      @Sqwidwood 2 ปีที่แล้ว +1

      i’m going for a hobbywing max 8 combo on mine since my esc did the red lights of death after like 1 year of ownership

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      @@Sqwidwood yeah that’s probably a good choice

    • @Sqwidwood
      @Sqwidwood 2 ปีที่แล้ว +1

      @@RCKnockout yeah it’s good from what i’ve heard of

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@Sqwidwood yeah me too

  • @prestonsrc
    @prestonsrc 2 ปีที่แล้ว +1

    I think you'll like it. I use the 1/8th 130amp 1900kv spectrum combo in my maxx and it's a pretty nice set up. I also just zip tied the fan on the motor. 👍

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      I hope so……the fan still doesn’t fit over the 1900kv does it?

    • @prestonsrc
      @prestonsrc 2 ปีที่แล้ว

      @@RCKnockout It did. I just zipped ties it around the motor

    • @karlw2090
      @karlw2090 ปีที่แล้ว

      Is it as fast as it was with the stock traxxas esc?

  • @nightshiftcarguy8908
    @nightshiftcarguy8908 2 ปีที่แล้ว +1

    I just swapped a e-revo motor and esc into my maxx v1 same chassis. Very tight fit. For the motor mount u might want to get 8960x its made for the maxx to have a bigger motor in it. I used hot racing battery strap for a long time to hold down my tall 4s batteries but I went ahold and got the pure-tech quick mounts for extra holding cuz im running 2 3s 5200 batteries in it. I also run belted tires on mine

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      Nice man! So your able to run two 3s packs stacked now? I feel like the stock mount should be able to hold the motor I’ve got in it…..it’s held with four screws

    • @nightshiftcarguy8908
      @nightshiftcarguy8908 2 ปีที่แล้ว +1

      @@RCKnockout yes I am. When i get a chance im gonna load a short video of me taking it for its first run on 6s. Can not give it full trigger. It wants to pull the front off the ground as im it’s getting down the road or in the grass

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@nightshiftcarguy8908 yeah the unfortunate thing is not being able to give it full throttle

    • @nightshiftcarguy8908
      @nightshiftcarguy8908 2 ปีที่แล้ว +1

      @@RCKnockout next weekend im planning on going out bashing with a buddy he just got a xmaxx. And he wants to do a tug of war with my kraton 8s. So I plan on getting some shots of the tug of war and my maxx vs his e-revo. Should be 1 hell of a bash lol

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@nightshiftcarguy8908 sounds like fun man…..I think the extra weight of the Kraton 8s might be the deciding factor in the tug of war though…..I could be wrong

  • @damonpeters4368
    @damonpeters4368 2 ปีที่แล้ว +1

    Hey. Does anyone else have an issue with the HDR videos cranking the brightness way up?

  • @JvD1985
    @JvD1985 ปีที่แล้ว +1

    I have put a 150amp Spektrum (6s) in my Maxx but I don’t run on 6s, only on 4s just to be safe 😅

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว

      Yeah I put the same esc in my Maxx…it started on fire lol 😂

  • @doublem6027
    @doublem6027 ปีที่แล้ว +1

    My esc just went out and I want to keep the stock system 4s plus its the holidays I don't want to spend a ton of money

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว

      Yeah the stock esc really isn’t that cheap though

  • @davec8853
    @davec8853 2 ปีที่แล้ว +1

    By the way, Traxxas specifically makes a bigger motor mount for converting this to 6s. It fits the larger can. 4s mount =8960. 6s mount = 8960X

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      I’ll have to look it up thanks……I feel like the stock mount should be able to hold this motor but I could be wrong

    • @davec8853
      @davec8853 2 ปีที่แล้ว +1

      @@RCKnockout the main benefit is the larger rear hoop to keep it from moving on jumps and the bottom piece actually cradles a little better. Fit my Castle 2200kv perfect. Only $8-10.

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      @@davec8853 ok thanks!

  • @CJ23taylor-animales
    @CJ23taylor-animales 2 ปีที่แล้ว +1

    Hey man! I was wondering if you would do a collection tour so we can see all the RC's you have! Thanks!

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      Yeah the plan is to do a full tour once I reach 10k subscribers…..

    • @CJ23taylor-animales
      @CJ23taylor-animales 2 ปีที่แล้ว +1

      @@RCKnockout Ok cool, thanks!

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      @@CJ23taylor-animales yep 👍

  • @lazermncrft5811
    @lazermncrft5811 2 ปีที่แล้ว +2

    u should get the sledge hammer tires for it they would just top it off also my ruslter 4x4 esc is back and I carn't figure out how to make it fixed bc the steering is throdel and I tried to fix it by watching the traxxas support vid but it didn't help do u know how t ofix it??

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      Yeah those tires would be cool. Sorry I have no clue

    • @lazermncrft5811
      @lazermncrft5811 2 ปีที่แล้ว +2

      @@RCKnockout okay thx

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@lazermncrft5811 yep!

  • @keaginm2791
    @keaginm2791 2 ปีที่แล้ว +1

    No hate to Spektrum but I really like running Hobbywing. Tons of power and cool temps

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      To all their own……I don’t mind exploring around and trying different stuff…..not to mention I already have experience with this esc and motor setup

    • @keaginm2791
      @keaginm2791 2 ปีที่แล้ว +1

      @@RCKnockout me as well, I've got one of the Spektrum 150 amp escs but it doesn't work well. It doesn't let me tune it. But I've also ran Spektrum in a few of my rigs but I'm just slowly switching to Hobbywing because they're always reliable. Just like everything else in the hobby, it's personal preference

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@keaginm2791 exactly

    • @Rahvanteli
      @Rahvanteli 9 หลายเดือนก่อน

      Are spektrums not rebranded hobbywings?

  • @paulclancy2404
    @paulclancy2404 2 ปีที่แล้ว +1

    Yep I had to make adapters , ive went through 4 escs in last couple months funny the maxx one still working good and I beat on it more than others never messing with gearing and running same batteries I guess or just luck of the draw

    • @paulclancy2404
      @paulclancy2404 2 ปีที่แล้ว +1

      I put max 8 in the maxx but like you said the traxxss esc so freaking big not sure where I'm going use it

    • @paulclancy2404
      @paulclancy2404 2 ปีที่แล้ว +1

      You can still use the traxxas 2400kv once you get adapters or change the ends, I tried it on 6s its uncontrollable

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@paulclancy2404 yeah I know I could buy some adapters…..I’ll probably try it with this motor setup first though

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@paulclancy2404 yeah it’s a huge esc!

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      Your stock vxl4s is still holding up?

  • @Tae_5ive9ine
    @Tae_5ive9ine 2 ปีที่แล้ว +1

    I switched my maxx to a 6s and I don’t have the range anymore it makes it like 15 feet then looses connection till I get closer. Any chance you know why?

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      Sounds like it’s a receiver issues

  • @bcumike
    @bcumike 2 ปีที่แล้ว +1

    That is the same heat sink I have on motor in my Kraton 6s, it takes some gloves to get it on, but its the only option my local shop had🤣

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      You squeezed that stock heat sink and fan on a 6s motor?

    • @bcumike
      @bcumike 2 ปีที่แล้ว +1

      @@RCKnockout yep, it was a bitch🤣
      Take the fan off and grab some leather gloves, she'll go.
      I would prefer something made for it, but motor gets real hot on 6s and I'm a little impatient sometimes

    • @bcumike
      @bcumike 2 ปีที่แล้ว +1

      @@RCKnockout I'll get back to ya with the part number, in just a few, just incase it's a different 1

    • @bcumike
      @bcumike 2 ปีที่แล้ว +1

      My receipt says:
      3458 - Heat sink (fits #3351R and #3461 motors)

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว +1

      @@bcumike didn’t it scape up the can of the motor quite a bit?

  • @jonathonburt8552
    @jonathonburt8552 ปีที่แล้ว +1

    Hey I bought this same setup and can’t seem to bind the esc with the Traxxas remote. Any ideas how to bind??

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว

      Binding is just between the transmitter and the receiver….is the esc turning on? Also is the esc wire plugged into the correct channel?

    • @jonathonburt8552
      @jonathonburt8552 ปีที่แล้ว +1

      @@RCKnockout the esc is turning on but won’t respond to the remote inputs. I have the esc plugged into channel 3 and steering servo into channel 2. I believe this is how it was with the old esc… what channel is it supposed to be plugged into

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว

      @@jonathonburt8552 esc should be 2…..I believe the servo should be in 1

    • @jonathonburt8552
      @jonathonburt8552 ปีที่แล้ว

      My receiver box was malfunctioning. I got a new one and it works now.. Thanks for your response. You earned a subscriber!

  • @WorkbenchWoodworking
    @WorkbenchWoodworking 2 ปีที่แล้ว +1

    How many amps is the original esc?

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      I’m not 100% sure…..I think it’s quite a bit less though

  • @rafishaik7559
    @rafishaik7559 4 หลายเดือนก่อน +1

    Hii sir My Name is shaik Rafi I am from India my rc car traxxas sledge Motor is 2000 kv Esc 6s that Esc Amps How much??? 120 or 150??

    • @RCKnockout
      @RCKnockout  4 หลายเดือนก่อน

      It’s a 150a esc

  • @martinbullla7654
    @martinbullla7654 ปีที่แล้ว +1

    How long did the ESC last for

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว

      Less than a month

    • @martinbullla7654
      @martinbullla7654 ปีที่แล้ว +1

      @@RCKnockout I just had my hobby shop order one for the Hoss I don't think I'm going to get it now I think I'll just spend a hundred and fifty-nine on the 6s and just run 4s I mean I have a spectrum 120 amp esc then I'm going to put in my granite because that's literally perfect for the Hoss so I might put it in that instead I'm glad I seen this before spending a hundred and forty bucks and a 4S Traxxas ESC to have it freaking break

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว +1

      @@martinbullla7654 yeah that sounds like a pretty good plan to me 👍😉

  • @daig1984
    @daig1984 2 ปีที่แล้ว +1

    Amain has a battery tray video

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      An aftermarket strap?

  • @jdmf22
    @jdmf22 2 ปีที่แล้ว +1

    Zeee 4000mah 6s will fit

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      It’ll fit under the stock mechanism?

    • @jdmf22
      @jdmf22 2 ปีที่แล้ว

      @@RCKnockoutyea sideways.

    • @jdmf22
      @jdmf22 2 ปีที่แล้ว +1

      @@RCKnockout stock battery tray :
      186mm L x 48mm W x 43mm H
      Zeee 4000mah battery :
      132mm L x 42mm W x 48mm H

    • @RCKnockout
      @RCKnockout  2 ปีที่แล้ว

      @@jdmf22 gotcha……I do already have a 6s pack that I wanna use…..but it’s way too big for the stock battery mechanism

    • @jdmf22
      @jdmf22 2 ปีที่แล้ว +1

      @@RCKnockout If it fits in the actual cut out you can always go with the hot racing battery strap

  • @maltesrc
    @maltesrc 2 ปีที่แล้ว +1

    Next video ?

  • @bryanharness1122
    @bryanharness1122 ปีที่แล้ว +1

    Learn to solder then u can use or make whatever u need

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว +1

      That’s true…I’ve gotten a little bit better at it with practice

    • @bryanharness1122
      @bryanharness1122 ปีที่แล้ว +1

      @RC Knockout you'll get it. I struggled alot at first. Just get some scrap and solder ends until your satisfied.

    • @RCKnockout
      @RCKnockout  ปีที่แล้ว +1

      @@bryanharness1122 yeah I have issues keeping the iron hot enough to melt the wire lol 😂