Great video. Short, informative, no bullshit and helpful to those who need it. Sad enough but it’s Refreshing seeing someone else that knows what they’re doing AND knows how to explain it. Again good job brother!!
Thank you for posting this video it turns out the fuse was blown on the 05 chrysler 300 I was working on and replaced the JKs fuse and it started right up thank you so much for taking your time to make this video great information
Thanks for your videos, I have 2006 Chrysler 300 srt8 150.000 miles, the car cranks on cold with no problems, start right up, but when I drive de car for about 15 minutes and I turn off the engine the car cranked to slow like the battery is not good, I need to let it cool off so I can be able to start the engine again. I took the car to 2 mechanic's the first one replaced the starter the second one replace the battery and the problem still there. I went back to one off them and he changed the positive starter cable, and it still didn't fix the problem. thanks
That you for the video, it was really knowledgeable. I'm having an issue where my 05 Chrysler 300c 5.7L won't start. Used your video and paperclip engaged the starter but when I turn the key over there is no response. I get all the indicator lights on but there is no sound. Battery is good and fuses good, also swapped relay. Any suggestions you could give would be helpful.
Did anybody figure it out? I'm literally having that issue right now. Use the paper clip and the engine starts right up. But when I put the relay back in and try to turn it, it just gives me one, click from the starter
So I have a 2006 Chrysler 300 Srt, my crank fuse blew when I had the a/c running and car at idle, replace the fuse. Now the car starts but once at idle or putting it in drive the car dies, any recommendations? Scanned vehicle and only had misfire faults. Check plugs and coils and good.
I questions about my 2012 300. It won't start. Someone told me it could be a starter fuse relay? Batteries were checked no issues. It has power but won't turn over. I dont even hear a click.
@@5ucio are you sure it’s the alternator my charger is giving me the same issues and I replaced the alternator a month ago and my battery is good. Going to change out my ignition switch and ignition switch actuator and see if that helps because my fuses aren’t getting power to them. [Car has power, Starter Fuses not receiving power]
I have a 2006 Chrysler 300 2.7 that died on me while car was running no bus I've changed the fuse box of changed the camshaft position sensor checked all the fuses and relays no crank no start
I tried swapping out the relay switch with the horn relay switch, then I tried a paper clip - it start later it didn't work then the paper clip got hot but no start or sound ?
hey so i can see you have a huge knowledge on these cars, if you could reply that would be great . my speed cluster doesnt move but my rmp gauge does, and it says its lost communication with the tcm, some effects of this are the car slams into gears. is there any insight you could give on whats going on with my 2006 chrysler 300
i know im late but i recently had this problem with my car and what i did to fix it was take apart the abs control module and clean it out put it back together and cleared the codes and has worked ever since
I have a 07 300 3.5 replaced the timing belt and when I started it run and shutoff after 5 sec it did it 3-4 times and then it stop crancking I check the fuses and relays and I was able to crank it with the paper clip but didn't start wi the key ignition on. It has no chip key.
I found the blown fuse in the rear that says ign. But still no crank the security light is blinking i reset the computer and still the same. Any ideas. Thanks for you help.
![เปิดบ้าน นาราเครปกระเทย 1 ไร่ ขายขาดทุนหลัก10ล้าน เอามาใช้หนี้!!! l [Nickynachat]](http://i.ytimg.com/vi/0jz84VFWVP4/mqdefault.jpg)
Great video. Short, informative, no bullshit and helpful to those who need it. Sad enough but it’s Refreshing seeing someone else that knows what they’re doing AND knows how to explain it. Again good job brother!!
Thank you for posting this video it turns out the fuse was blown on the 05 chrysler 300 I was working on and replaced the JKs fuse and it started right up thank you so much for taking your time to make this video great information
Como se ubica ese fusible
Thanks a lot for this video and sharing your knowledge. You saved us a tow truck. God bless you with more knowledge.
What if u tryn yur switch on an it's nothing ,but all the lights cum on tho
An I checked my fues
This video is very helpful and informative .Thanks from a 11 year mechanic
You save me a lot of money,5amp fuse was bad.
You're awesome 👌 thanks
Very informative video. Short and straight out to the point. Very great video. Thanks 😊
Really Great Video Thanks for taking the time
Thanks for your videos, I have 2006 Chrysler 300 srt8 150.000 miles, the car cranks on cold with no problems, start right up, but when I drive de car for about 15 minutes and I turn off the engine the car cranked to slow like the battery is not good, I need to let it cool off so I can be able to start the engine again. I took the car to 2 mechanic's the first one replaced the starter the second one replace the battery and the problem still there. I went back to one off them and he changed the positive starter cable, and it still didn't fix the problem. thanks
I have a 2004 Chrysler 300m special and it works! thanks bro 👍👍
Thank you! You have made my day. Short, sweet, to the point. I learned a lot.
Hey man thanks for the advice , my 3.5 300 is not cranking and here in the islands it’s not easy to find spare parts.......
Good luck!
That you for the video, it was really knowledgeable. I'm having an issue where my 05 Chrysler 300c 5.7L won't start. Used your video and paperclip engaged the starter but when I turn the key over there is no response. I get all the indicator lights on but there is no sound. Battery is good and fuses good, also swapped relay. Any suggestions you could give would be helpful.
Hey did you ever find a solution? I've ran into the same issue.
Did you find the solution I have same issue but no lights or crank nothing
I have this issue happening now.. did you find the issue?
Did anybody figure it out? I'm literally having that issue right now. Use the paper clip and the engine starts right up. But when I put the relay back in and try to turn it, it just gives me one, click from the starter
helpful? SUPER HELPFUL, THANK YOU!!!
very helpful thanks. working on a family friends car. It was giving to him and well it has some issues. but this is good info thanks.
It was very helpful thank you very much
awesome always like to learn
Thanks man it help me alot
So I have a 2006 Chrysler 300 Srt, my crank fuse blew when I had the a/c running and car at idle, replace the fuse. Now the car starts but once at idle or putting it in drive the car dies, any recommendations? Scanned vehicle and only had misfire faults. Check plugs and coils and good.
Thanks bro good video
I questions about my 2012 300. It won't start. Someone told me it could be a starter fuse relay? Batteries were checked no issues. It has power but won't turn over. I dont even hear a click.
Alternator
@@5ucio are you sure it’s the alternator my charger is giving me the same issues and I replaced the alternator a month ago and my battery is good. Going to change out my ignition switch and ignition switch actuator and see if that helps because my fuses aren’t getting power to them. [Car has power, Starter Fuses not receiving power]
Thank you so much , you save my pocket :*
I have a 2006 Chrysler 300 2.7 that died on me while car was running no bus I've changed the fuse box of changed the camshaft position sensor checked all the fuses and relays no crank no start
Nice job guy 👍😃 I have a problem that it shuts off why???
this is good info.,. why so many thumbs down?
So if I swap it to the horn relay and I press the horn but doesn’t work it means the relay is bad ?
I tried that and my car still won't start, does that mean there's a problem with the starter?
you are a godsend
I tried swapping out the relay switch with the horn relay switch, then I tried a paper clip - it start later it didn't work then the paper clip got hot but no start or sound ?
I did the paper clip trick but all it did wuz click it didnt start so is my starter bad then ?
I've been looking for help.. trouble shooting my 2014 Chrysler..
hey so i can see you have a huge knowledge on these cars, if you could reply that would be great . my speed cluster doesnt move but my rmp gauge does, and it says its lost communication with the tcm, some effects of this are the car slams into gears. is there any insight you could give on whats going on with my 2006 chrysler 300
i know im late but i recently had this problem with my car and what i did to fix it was take apart the abs control module and clean it out put it back together and cleared the codes and has worked ever since
I jump that like you showed and the car started I tried switching relays are but the car still. Will not start using the key
this dude rocks text book answers the way he explains this the biggest idiot would understand love that
OK so my horn does not work.
I have a 07 300 3.5 replaced the timing belt and when I started it run and
shutoff after 5 sec it did it 3-4 times and then it stop crancking I check the fuses and relays and I was able to crank it with the paper clip but didn't start wi the key ignition on. It has no chip key.
I found the blown fuse in the rear that says ign. But still no crank the security light is blinking i reset the computer and still the same. Any ideas. Thanks for you help.
@@hyper-amps1684 hi were you able to find the solution? I've run into a similar problem.
Girls are watching tooo FYI were not fellas
😊😊😊😊😊ll? Km--a😊