Creality Filament Dryer Box 2.0 - amzn.to/3KamD1c 00:00 Intro 00:35 Unboxing 01:10 Read Over Instructions Before Using 01:28 Plug In Dryer Box 01:53 Remove Plastic Wrap 02:08 Load Filament into Dryer Box 02:33 Turn on Dryer Box on the Back 02:43 Use Knob to Set Time & Temperature 03:02 Recommended Drying Temps Per Type of Plastic 03:40 Set for PETG (or whatever plastic you are using) 03:59 Heating Filament 04:14 How You Can Print With Filament in Dryer 04:59 Going over the Design of the Dryer 05:33 Under Temperature in Under 30 Minutes 05:57 Final Thoughts Check out my website at mcfixit.us #3dprint #creality #filamentdryer Links are associate links. A small portion of whatever you buy helps support this channel. Thank you for clicking on the links and purchasing to help out this channel to keep making great content for you! Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT. #mcfixit #autorepair #rav4 #toyota #channgingbrakes #carrepair #mechanical -- Supplies used to record this video: * GoPro Hero 7 Black - amzn.to/3f3ALtb * 256GB Flash Drive - amzn.to/33pAueG * Vlogging Frame - amzn.to/33tajE0 * GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu * Youmic Lavalier Lapel Mic - amzn.to/2R55sWX * Boom Stand (tripod) - amzn.to/3bdkQaw * 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM * Portable Battery Powerbank- amzn.to/3vJQc0q * 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH
Something to consider is that when you load the filament into the dryer, the percentage of humidity shown is the percentage of moisture in the air inside the dryer, not in the filament itself. When the recommended time has expired, only then will the moisture content of the filament be likely to match that of the air.
Does it actually hit 65°C? And are you able to do a noise check? Curious how loud it is while it’s running. Sounds kind of in the video. I’m currently on the fence looking at a few different options. The Sovol looks nice for a double role but maxes out at 50°C and you need to prop it open to get it to dry correctly. Any thoughts?
I am considering of buying one but i am not sure if dries whole spool of filament or just top centimeter or so ? Am i right it does not turn she spool while drying
Creality Filament Dryer Box 2.0 - amzn.to/3KamD1c
00:00 Intro
00:35 Unboxing
01:10 Read Over Instructions Before Using
01:28 Plug In Dryer Box
01:53 Remove Plastic Wrap
02:08 Load Filament into Dryer Box
02:33 Turn on Dryer Box on the Back
02:43 Use Knob to Set Time & Temperature
03:02 Recommended Drying Temps Per Type of Plastic
03:40 Set for PETG (or whatever plastic you are using)
03:59 Heating Filament
04:14 How You Can Print With Filament in Dryer
04:59 Going over the Design of the Dryer
05:33 Under Temperature in Under 30 Minutes
05:57 Final Thoughts
Check out my website at mcfixit.us
#3dprint #creality #filamentdryer
Links are associate links. A small portion of whatever you buy helps support this channel. Thank you for clicking on the links and purchasing to help out this channel to keep making great content for you!
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #autorepair #rav4 #toyota #channgingbrakes #carrepair #mechanical
--
Supplies used to record this video:
* GoPro Hero 7 Black - amzn.to/3f3ALtb
* 256GB Flash Drive - amzn.to/33pAueG
* Vlogging Frame - amzn.to/33tajE0
* GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu
* Youmic Lavalier Lapel Mic - amzn.to/2R55sWX
* Boom Stand (tripod) - amzn.to/3bdkQaw
* 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM
* Portable Battery Powerbank- amzn.to/3vJQc0q
* 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH
Getting this, because it's affordable, and exactly what I need.
Thanks for the video!
Something to consider is that when you load the filament into the dryer, the percentage of humidity shown is the percentage of moisture in the air inside the dryer, not in the filament itself.
When the recommended time has expired, only then will the moisture content of the filament be likely to match that of the air.
Good tip. Thanks for adding this!
Does it actually hit 65°C? And are you able to do a noise check? Curious how loud it is while it’s running. Sounds kind of in the video. I’m currently on the fence looking at a few different options. The Sovol looks nice for a double role but maxes out at 50°C and you need to prop it open to get it to dry correctly. Any thoughts?
Yes it does. It's got some noise from the machine running, but I wouldn't call it loud by any means.
Just got mine today, SPL, is
Hello bro, great video, a question, does your filament dry well?
Yes! If you are in humid spaces then I’d definitely suggesting getting one to keep your filament dry right before use!
I am considering of buying one but i am not sure if dries whole spool of filament or just top centimeter or so ? Am i right it does not turn she spool while drying
The spool will spin when using it in a 3D printer, but it does not spin independently. I hope this helps answer your question.
yeah, go ahead and do that...
Thanks! Drying filament insures optimal performance and longevity of prints. Thanks for commenting