amazing! currently trying to make a game with accurate drone physics and didnt understand how drones actualy work. now that i have watched this Lesseon i am filled with the knowledge you shared to other poeple. love it.
Stupendous job brother, I really liked your video, I had seen atleast 50-60 video and till now this one is the best, please do make more videos like this I liked coz d explanation was simple, in depth and addresses proper point❤️
Well done 👍 very interesting explanation احسنت 🇰🇼 But allow me to say something I think the motors 1-2 in front 3-4 in the back Starting from right to left 1-2-3-4
Thanks for a very informative video. I got here because my drone had a minor accident after which it does not hover in one place. It tends to move in circles while hovering (no yaw). Any thoughts on what's messed up? I changed the propellers to be sure there isn't a weight imbalance. Thanks!
actually it is all about regulation of voltage that motors receive at the output of the circuit of controller right? And also balancing the current for all motors. Because if I try to do so without any volatage/current regulator , one motor takes too much current than others and drone just jump into any direction possible. Also i noticed that people don't respect the direction of propellers and i see sometimes on video of yt that their drones just spin arround. I am trying to figure out how to build my own drone controller and circuit (as my project for electronics).
Good n very informative tutorial, However in ur video u says , bottom R is mot 1, top R is 2, top L is 4 n bott L is 3 where as kk 2 says top R 1, top L 2, bott R 3 and bott L is 4.. Do I need to connect my esc to rx in the sequence you mentioned ?
I ve built the x450 fr with kk2.1 board , the esc seems cheap , however it tries to flip backwards, while taking off, . Done all the configs as per kks inst programmed the tx as pr inst, Pls suggest the solu
So if the the CW motors were completely dead (not spinning) and the CCW motors were the only ones still spinning, will the drone still turn CW or would it switch the CCW direction instead before crashing?
On paper, assuming it still had enough lift to not fall, the drone body would start spinning CW because of the imbalance in torque. (Only the CCW props are spinning) In real life, you probably wouldn't lose two motors simultaneously. You would land (or crash most likely) when you lose one. I haven't seen quads IRL that would automatically change motor direction to try to maintain stability. Even if it did, it would be producing lift in the wrong direction. This would cause a crash. I did see some interesting experiments though where a drone can recover when losing a motor by spinning the body quickly. For hexacopters, I have seen people lose one motor and keep flying.
I believe all quadcopters have a gyro and accelerometer. Both of those are necessary to keep the quadcopter level. Without them. It won't even lift off the ground. GPS on the other hand, is required to keep your quadcopter in one fixed position at all times.
If helicopter tail which thrust is perpendicular to bigger one thrust , ,produce either leftward and rightward thrust , then how the big one propeller is producing rightward or either leftward ,We know it is balancing mg and it only producing upward thrust ,plz.. explain me ??
Just WOW, thank you so much, so clear and helpful. Keep it up!
I love how you clearly explain the basics! Thank you.
Lots of clever and cool components all working together when operating the drone!
Very clear explanation hats off!!!
BRILLIANT video!!! Thanks
amazing! currently trying to make a game with accurate drone physics and didnt understand how drones actualy work. now that i have watched this Lesseon i am filled with the knowledge you shared to other poeple. love it.
You deserve my like
Even more amazing than I thought. My little drone does all that is incredible
I am using this in the Drones in School program. EXCELLENT
Great explanation mate... U really made it simple 💯💯
Thank you! Such a great video!
Nice and crisp, Explanation of concepts is really gripping.
Thank you so much for making these concepts as clear as cyrstal
Stupendous job brother, I really liked your video, I had seen atleast 50-60 video and till now this one is the best, please do make more videos like this
I liked coz d explanation was simple, in depth and addresses proper point❤️
Good tutorial.
Awesome, sweet n simple.
Short answer:
The best thing since the television and video games.
I 💘 FPV!
awesome video!!!
Great video thanks
Brilliant explanation
Excellent,,!!!!
Super cool video
Crystal clear
Amazing thank you
Excellent tutoring .
Thank you so much bro
Well done 👍 very interesting explanation احسنت 🇰🇼
But allow me to say something
I think the motors 1-2 in front 3-4 in the back
Starting from right to left 1-2-3-4
Thank you very much
I love it.
really helpfull!!!!
Thanks for a very informative video. I got here because my drone had a minor accident after which it does not hover in one place. It tends to move in circles while hovering (no yaw). Any thoughts on what's messed up? I changed the propellers to be sure there isn't a weight imbalance. Thanks!
Good video
actually it is all about regulation of voltage that motors receive at the output of the circuit of controller right? And also balancing the current for all motors. Because if I try to do so without any volatage/current regulator , one motor takes too much current than others and drone just jump into any direction possible. Also i noticed that people don't respect the direction of propellers and i see sometimes on video of yt that their drones just spin arround. I am trying to figure out how to build my own drone controller and circuit (as my project for electronics).
Your voice sounds great. Are you an aeronautical engineer?
Thank you. I'm glad you enjoyed. My degree is petroleum engineering. I like working on all kinds of projects though.
Good n very informative tutorial,
However in ur video u says , bottom R is mot 1, top R is 2, top L is 4 n bott L is 3 where as kk 2 says top R 1, top L 2, bott R 3 and bott L is 4..
Do I need to connect my esc to rx in the sequence you mentioned ?
Um, so the drone will only need GNSS or both barometer + IMU + GNSS ?
I ve built the x450 fr with kk2.1 board , the esc seems cheap , however it tries to flip backwards, while taking off, . Done all the configs as per kks inst programmed the tx as pr inst,
Pls suggest the solu
I was wondering if you could help me please. There is a word in the guide of drone .. which is ( EXPO) . I didn’t understand it.
Hello let me know how drones turn left, right,up and down ward...
So if the the CW motors were completely dead (not spinning) and the CCW motors were the only ones still spinning, will the drone still turn CW or would it switch the CCW direction instead before crashing?
On paper, assuming it still had enough lift to not fall, the drone body would start spinning CW because of the imbalance in torque. (Only the CCW props are spinning)
In real life, you probably wouldn't lose two motors simultaneously. You would land (or crash most likely) when you lose one.
I haven't seen quads IRL that would automatically change motor direction to try to maintain stability.
Even if it did, it would be producing lift in the wrong direction. This would cause a crash.
I did see some interesting experiments though where a drone can recover when losing a motor by spinning the body quickly.
For hexacopters, I have seen people lose one motor and keep flying.
@@EngineersEscape thank you so much for the reply!
is there a formula to compute the lift vs the weight?
To let the copter stay in a height at a Position, i need a Barometer and a GPS Modul right ?
I believe all quadcopters have a gyro and accelerometer. Both of those are necessary to keep the quadcopter level. Without them. It won't even lift off the ground.
GPS on the other hand, is required to keep your quadcopter in one fixed position at all times.
I don't use autolevel. I fly in acro or "Air mode". The barometer is cancelled in this mode. I am in full control of my aircraft.
If helicopter tail which thrust is perpendicular to bigger one thrust , ,produce either leftward and rightward thrust , then how the big one propeller is producing rightward or either leftward ,We know it is balancing mg and it only producing upward thrust ,plz.. explain me ??
What's happening with the height of a Quadcopter when it flies between 2 buildings (venturi effect) ?
I’m using this for my a2 c of c qualification
👏👏👏
Kalman Filtering?