RS Triple 6 I put them on at the same time I did lowering springs. Did the PumaSpeed eibach springs. Rides a whole lot better now. Pogo like bounce is slightly reduced.
@@19ZORES72 Below information is directly from the manual for their 12.5mm spacers…. So you were saying?? Maybe you should do a little research before you disagree with someone & make the claim something is absolutely not needed. Don’t want inaccurate information being put out. 🤷♂️🤣🤣 ATTENTION! Longer wheel bolts must be used with wheel spacers (not included in spacer kit). Additional bolt length should be equal to spacer size. Wheel hubs can be damaged by excessively long bolts. Ensure wheels spin freely by hand after installation. ATTENTION! Use torque spec for the rim as described by the vehicle manufacturer or parts approval of the rim manufacturer. Never use an impact gun! Minimum thread engagement for wheel bolts M12 x 1.25 at least 8.0 turns M12 x 1.50 at least 6.5 turns M12 x 1.75 at least 6.5 turns M14 x 1.25 at least 9.0 turns M14 x 1.50 at least 7.5 turns 1/2“ at least 8.0 turns
I’ve had them on my RS for 6 months now. Awesome so far 🤙🏼
great !! Have they improved the feel of the car ??
RS Triple 6 I put them on at the same time I did lowering springs. Did the PumaSpeed eibach springs. Rides a whole lot better now. Pogo like bounce is slightly reduced.
Received mine today, also have a set of Mountune Lowered Springs to go in which I will be doing at the same time. Low and wide
ah nice man, they are a great piece of kit, i went with the H & R lowering springs and personal they are really good.
I just got mine in for my fiesta ST. Didn’t go to aggressive with a 12.5mm with my oem wheels, anxious to get them on lol
haha i am sure they will be fine
What size for standard mark 3 rs 2017
Would the 15mm from st suspension fit the rs? And if so why or why not did you get those?
Do you have a part number?
WARNING ‼️⚠️‼️ I did not see you change the studs for longer ones! Did you?
This is VERY dangerous, completely unsafe and is done the wrong way!
WARNING!!!!!!!!!!!!!!!!!!!!!! Some people don`t understand how the ST DZX-system works ;-)
No longer studs are needed !
Nathan, the wise man?
@@19ZORES72 why so man?
@@19ZORES72
Below information is directly from the manual for their 12.5mm spacers…. So you were saying?? Maybe you should do a little research before you disagree with someone & make the claim something is absolutely not needed. Don’t want inaccurate information being put out. 🤷♂️🤣🤣
ATTENTION!
Longer wheel bolts must be used with wheel spacers (not included in spacer kit). Additional bolt length should be equal to spacer size. Wheel hubs can be damaged by excessively long bolts. Ensure wheels spin freely by hand after installation.
ATTENTION!
Use torque spec for the rim as described by the vehicle manufacturer or parts approval of the rim manufacturer. Never use an impact gun!
Minimum thread engagement for wheel bolts
M12 x 1.25 at least 8.0 turns M12 x 1.50 at least 6.5 turns M12 x 1.75 at least 6.5 turns M14 x 1.25 at least 9.0 turns M14 x 1.50 at least 7.5 turns 1/2“ at least 8.0 turns
@@the.batman 🤦🏻♂️
th-cam.com/video/OnXroyAprVY/w-d-xo.html
😂😂