MGB GT 1981 - How to Replace the Rear Brake Shoes

[@davidrussellwilks]

That's a neat technique removing the shoes and springs as one

[@brendantakkos1328]

Many thanks. 👍🙏

[@453421abcdefg12345]

A good tip on the use of the Mole grips, I was hoping you would show the fitting of the "E" clip retaining the break cylinder. Stay safe! Chris B.

[@RimmerBrosTV]

Yeeeaaaaaah….we were hoping to show that too. Some things you just can't get to, unfortunately. It would just have looked like a very oily octopus trying to grab the camera. We DID try. haha!

[@hankpb1]

hi is banjo axle the same ?

[@RimmerBrosTV]

Hi there, it is the same :)

[@16redkeane]

Please help me I’ve just had the hydragas spheres changed on my mgf and to get the correct height on the rear the front is sitting at 405mm any ideas

[@RimmerBrosTV]

Replaced or reconditioned? It sounds high at the front. Do you mean that if you get the rear at the correct level that the front goes too high?

[@16redkeane]

Rimmer Bros TV replaced them with a reconditioned set from mg obsession and yes if I get the back to 360 the front goes to 405-410mm

[@RimmerBrosTV]

@@16redkeane You probably need to be speaking to MG Obsession really. Hard to diagnose the issue remotely.

[@bobhenson9867]

Let’s see you fit the C clip to the cylinder😂