Making A Krystal Convertable Bag
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- All our patterns can be found at lindshandmade.com
Today I am sewing the Krystal Convertible bag on both my industrial Juki DU -181n and Juki 2000qi. It has been made successfully from start to finish on a domestic machine by my wonderful tester team. (Of course, the materials you choose, and the domestic machine used, also plays a role in how easy it is to do.) I've rated this pattern as intermediate because it does require the use of rivets (or chicago screws would work) to install the D ring connectors at the end and this may be a supply/tool that newer bag makers do not have on hand or is a technique they are unfamiliar with.
*The exterior fabric is Wildwood- Garden party in navy quilt cotton from Riflepaper Co
*The chartreuse accents are cowhide leather from Tandy leather.
*The interior is all waterproof canvas from Fabric wholesale direct (If you spend $35, you get $10 off and I get reward points using my referral link here: www.fabricwhol...)
*I am using "Fairy floss sewing string" which is a tex 80 (for my industrial machine and tex 45 for my domestic machine) from Geekyhardware.com
*The peach striped zipper tape and star pulls are from ZipperValley.com
*The 1/8" and 1/4" DST leather tape is from wawak.com
*The super sharp scissors are Kai 9" also from wawak.com
*My "keep it thready" sewing tshirt is from Indolovekreation.com
*Giardini leather edge paint is from thebuckleguy.com
*Leather paint roller applicator, wool dauber, Ecoweld waterbased adhesive, and Small/medium/large rivets are all from Tandy leather
*Double sided vinyl as an option for the d ring connectors from mojosew.com
Here are the timestamps:
00:05 Intro & Bag Overview
01:18 Prep Work & Materials Needed
02:58 Discussing rivets and post lengths
03:55 Tracing the zipper box cut lines onto the main body back exterior and lining piece.
05:26 Gluing the d ring connector rectangles wrong sides together
08:06 Trimming the d ring connectors down to size and punching the rivet holes
08:44 Topstitching the d ring connectors
09:20 Adding the first layer of the leather edge paint
10:18 Making the shoulder straps
16:10 Adding the second layer of edge paint to the d ring connectors
17:14 Making the exterior slip pocket in fabric (option A)
19:27 Making the exterior slip pocket in vinyl/cork/leather (option B)
22:08 Making the interior slip pocket
25:37 Adding the interior slip pocket to one of the main body liners
27:15 Adding the interior zipper pocket to the other main body liner
39:35 Prepping the zipper boxes on the back main body exterior and 1 zipper lining
41:23 Adding the back slip pocket to the back main body exterior
42:33 Installing the exterior zipper pocket
49:05 Prepping the main zipper
51:14 Installing the main zipper
53:50 Attaching a bag label if needed
54:33 Sewing up the sides of the bag
55:38 Pressing the side seams open
56:50 Attaching the bottom bases to the exterior and liner
1:03:23 Turning the bag right side out
1:03:36 Attaching the d rings and d ring connectors
1:03:38 Closing the turning hole
1:09:45 Making the straps convertible by attaching them to the d rings
1:11:05 "Training" the slouch in the bag.
I love that your patterns usually include most if not all pattern pieces even if they are just rectangles. This really helps me out. When I cut by measurements, I often cut the rectangles incorrectly, usually off by an inch. Just wanted you to know it is appreciated.
I purchased my pattern last week. I finished the bag last night! Thank you for the video! It make it so much easier! :-) Love this pattern! I will have to make it again!
Thank you so much!
I made this bag about 7 months ago and it has sat on my sewing machine table unfinished. I needed to build up the confidence to do the strap anchors and today I had that confidence and "I did it". This is a fabulous pattern. Thank you
Oh man, I’m glad you finished it! That would have been a sad day to leave it unfinished 🥺
Tape is a game changer...thank you!
It really is!
Bought my pattern today, my rivet kit comes tomorrow. I'll be sporting my new magic convertible bag by the end of the week. 😀
Yessssss!!
Such a CLEVER design!!! I love ❤it!
Thank you so much!
Thank you, beautiful bag ! I will be purchasing this pattern. Great tutorial.
Thank you!
❤️❤️❤️❤️❤️❤️ 🤗❤️🤗❤️🤗 mine turned out great 🤗. Now to make 2 for my daughters!
Yay! So happy to hear that!
this was awesome, better than watching TV ;) even learnt some new tips :) Now I really want to go make one LOL
Aww thanks Sue!
Excellent video!! I loved the pace and the attention to detail!
I just finished my first one. Very happy with the results. Thanks for the tutorial.
You’re welcome!
Love it 😍 Wonderful work! As always thank you for sharing
thank you for this tutorial. This is similar to luglife zipliner convertible bag that I bought. I've been trying to look for pattern for that bag... now I know how to make it. thanks again.
Such a beautiful bag!!!💜
Thank you so much!
Awesome tutorial. It's such a beautiful bag. Thank you for the great tips & complete video.!!
You’re welcome! So glad you like it 😀
Thank you so much
This is an amazing pattern. The video tutorial is amazing. My only complaint, the pattern pieces did not match the height and width of the measurements on the front. I did check the one inch boxes on each piece but when cutting out from the actual pattern piece, it was smaller than listed measurements. It caused my bag to be smaller than it should have been. I did not realize this error until I was making the interior slip pocket and it said to measure down 5 inches. There was no way to do that.
I’m sorry to hear that. It does sound like it was a printing issue though. We’ve since changed our practice to use a 2” box on our most recent patterns because it’s really difficult to tell the 1” box is off if for example your printer forced printed at 96%. Over the course of a large pattern piece such as this one, it ends up being quite a bit off but it’s very hard to tell with only 1”😞
Is there an update or version 2 for this pattern? I did notice the SVG files has a 2nd version but not the downloaded one.
Any updates we’ve done have been to add files like SVGs or projector and AO files. None of the written portion has been changed in any way.
Is it possible to make the whole bag out of quilt cotton ? And if so how ?
Has anybody tried doing the side zipper the normal way rather cutting and taping edges back.
Yes! And it turned out fine 😄
I did the vertical zipper my way. Looks great 🤗
Im in the middle of making this and I’m using vinyl for the outside front and back. I’m wondering if I should do the front sideways zipper opening on the leftside the same as you did for the quilt cotton? Can someone let me know. TIA!
Depending on the thickness of the vinyl, I typically just cut a ½” window and leave the edges raw for my vinyl and leather versions since they don’t fray. No *need* fold them to the back technically.
Arghhhhhh!!! I just made the bag and closed it up and realized I forgot to sew the straps to the base. And I cut off the bulk seam allowance so I can’t even rip it out and go back. I’m sick!
Oh man, I’m so sorry. Take a breather. Walk away for a day and come back later and seam rip and add it. It’s fixable!
I had to buy this pattern. It literally has my name on it!! And it is spelled like mine! Plus the bag is exactly what I was looking.
Question: where do you it buy your fabric? Specifically the rainbow watercolor fabric used in the instructions for the pattern? It’s stunning!!
I got that as a custom order from cottonandtwirls.com
I got the pattern I hope I can make it @ lind Handmade desegins
You got this! 💪🏻
Would you use a woven with fleece if using cotton canvas? Using a juki 2010
No I just use the woven interfacing when doing cotton canvas
Does this pattern include the SVG files
Yes it does
Can you make this in vynil or is it just for fabric only?.. thank you
Absolutely! I’ve made all leather ones before.
Me pasaría alguien las medidas del cuerpo y base
I provide the measurements and/or printable pattern pieces within the pattern. All my patterns can be purchased at Lindshandmade.com.