This CR will be the BEST restoration of a 250 on TH-cam, you are meticulous, precise, clean, perfect, like sing Tina Turner "You are Simply the Best" ! :) lol
EDITED!: When you wanna REPLACE (remove without using the same bearing) bearing: actually in Bulgaria(slav country) we push out the bearings with flat screwdriver from the oposite inside side of bearing so that you push the bearing out when you hit the inside part with the screwdriver from the other side... it sounds complicated but its not ;) sorry for bad English, Im from Bulgaria P.S. I've wached all of your vid's and theyre beest!!
uuh .. just look at facebook page Bulgarians know or Slav memes or Slav world or whatever.. P.S. I was talking about when you wanna replace a bearing !!!!!I(sorry forgot to mention that)
You should powdercoat the hubs chrome!! like you did on your other wheel build video before you put on the red powder,when you still had your 119 creations intro!! Then do black spokes,red nipples and black wheels
Thanks to you, I just repaired a chinese pitbike of a friend of mine, the seller just ripped him off, oil was shit, clutch didnt work and back brake also. I repaired it by remembering your videos.
New subscriber, love your shop set up and organization. Would really appreciate more detail on the pressure washer blast cabinet. My greasy diesel parts are a pain to clean and that thing looks interesting.
I don't know how someone can bend a rim, I rode my dirtbike extremely aggressively in rocky areas with both flats on front and rear for multiple rides before finally fixing they didn't bend, or is it cause poor maintenance?
Hey i have a question ok so im putting an engine that was already taken apart from my friend and the bottom end lookd grest but the clutch shaft is sticking out and i can open the left side casing to see if the shaft is broken or just not in the correct position because it wont go in if i push it and it comes out easy so i wanted to have your input on this im going to take it apart in a few hours to see but thatd gonna be a task because the bolts are seized
Hey Cameron...I just Subscribed today. Are you a Pro Mechanic or a Avid Home Mechanic? Just wondering how you learned all your awesome skills. I'm a home motorcycle mechanic but a pro bicycle mechanic. Thanks for sharing!
Can u weld a engine stand and make a video how to? Would be cool to see something like that on your channel:) like your videos bro, seems like u have everything under control:)
Nope. Not a ton of force. Just how the force is applied. I bent the rim on my XR650L hitting a paving stone just right. Funny thing was, i di that out in nature. Hidden in the tall grass. Not going fast, just clipped it just right.
2004klx125 rider if your a beginner they're pretty good to learn on but if your looking to get pretty decent at motocross maybe should consider an actual mx bike
Enter the giveaway for the sprocket over on IG instagram.com/cameronniemela/
Cameron Niemela is there a model number I could look up to see if it fits
Yep, most. turn on subtitles :)
Did anyone else’s audio cut out like the whole video
Yes
Maybe his music got a copyright strike?
KenflowXP It did. The video had music before and it got copyrighted.
its gone
@@Connor-gx6ed
Yes
Not gonna lie, I'm glad I found this channel. Its kind of inspiring me to go out and clean the heck out of my cr250. Can't wait to see it finished.
The cr250 will look so fresh when it is done!! Great video
Very thorough and detailed. I like the clean video, good audio and attention to the smallest aspects of this build. Another great upload, thanks.
Can't wait to see how it's going to look your CR, absolutely love your channel! Great job!!
Regards from Mexico.
Looks like the hard work is done it's like anything the cleaning and prep work is most the work and that's looking cleeeeaaan !! So fresh .
Awesome videos man. I’m working on rebuilding and cleaning my 05 crf 250 your videos have definitely helped I appreciate that!
Heavy duty spokes were one of my best investents on that bike besides VForce3 reeds.
Warped.
Can't wait to see the results can . It's going to look brand new . They parts look brand new great job 👍🏼
This CR will be the BEST restoration of a 250 on TH-cam, you are meticulous, precise, clean, perfect, like sing Tina Turner "You are Simply the Best" ! :) lol
Cameron I still don't see why you don't have a 100k subs and a ton of viewers; love the spectacular videos and keep them coming.
Hola Cameron ! Que producto usas para limpiar las partes de la moto ? Saludos desde Argentina !
EDITED!:
When you wanna REPLACE (remove without using the same bearing) bearing:
actually in Bulgaria(slav country)
we push out the bearings with flat screwdriver from the oposite inside side of bearing so that you push the bearing out when you hit the inside part with the screwdriver from the other side...
it sounds complicated but its not ;)
sorry for bad English, Im from Bulgaria
P.S. I've wached all of your vid's and theyre beest!!
No, it's just you. Nobody wants to hurt your feelings. Bulgarians are gently people...
uuh .. just look at facebook page Bulgarians know or Slav memes or Slav world or whatever..
P.S. I was talking about when you wanna replace a bearing !!!!!I(sorry forgot to mention that)
I found one of your videos in my recommended (the Kx250 one) i gotta say your videos are very interesting, keep up the great work!
what do you use to clean the parts?? i need to know, keep up the good work loving the vids
Great video! 👌 I saw one of your older videos when you powdercoated a wheelset and it looked amazing🔥
You should powdercoat the hubs chrome!! like you did on your other wheel build video before you put on the red powder,when you still had your 119 creations intro!! Then do black spokes,red nipples and black wheels
WAIT I THOUGH YOU WAS GOING TO FIX THAT WHEEL? WTH BRO?! LOL
Thanks to you, I just repaired a chinese pitbike of a friend of mine, the seller just ripped him off, oil was shit, clutch didnt work and back brake also. I repaired it by remembering your videos.
Great video. That thing was bent ! I'm just on doing the same thing to my RM 250 smoker.
New subscriber, love your shop set up and organization. Would really appreciate more detail on the pressure washer blast cabinet. My greasy diesel parts are a pain to clean and that thing looks interesting.
Awesome vid man love sitting down and watching these vids with my dad
thanks Cameron the vid gave me alot of ideas freshen up my excel wheels off my rm 125.
Hubs turned out good
I don't know how someone can bend a rim, I rode my dirtbike extremely aggressively in rocky areas with both flats on front and rear for multiple rides before finally fixing they didn't bend, or is it cause poor maintenance?
Powder coat your rims red and black will matching colors to your graphics kit, would look sick, black rim and red hubs
DEV'S WHEEL BENDING VIDEO WAS FUNNY!
When you re installed all those spokes what did you use to give them that air tight seal at the rim ?
this bike is going to look mint.
You should cerakote the hubs in a mag color, would look sick!
I wondered if you could do a pw80 project
Hey i have a question ok so im putting an engine that was already taken apart from my friend and the bottom end lookd grest but the clutch shaft is sticking out and i can open the left side casing to see if the shaft is broken or just not in the correct position because it wont go in if i push it and it comes out easy so i wanted to have your input on this im going to take it apart in a few hours to see but thatd gonna be a task because the bolts are seized
Hey Cameron...I just Subscribed today. Are you a Pro Mechanic or a Avid Home Mechanic? Just wondering how you learned all your awesome skills. I'm a home motorcycle mechanic but a pro bicycle mechanic. Thanks for sharing!
Yeah man,come to france restore my bike.. I'll maybe look for a cr
Nice job! Looks great.
What kind of solvent do you use in your tank?
Commented on the Instagram post. Awesome job on the hubs.
Yo Cameron! really nice vid! specially the step u try to bend the wheel :p
Those hubs looked MINT wow
Just bought a 2010 kx250f....doing the same. But got the emgine in a thousand pieces....in a box....
Video Request - Can you show us how you go about doing a 2000+ 2 stroke top end rebuild with bottom end inspection?
what is that magic fluid in the washer???
when's the website gonna be back up
Where do you find your bikes for so cheap?
Looking good
I have a little crack in my rim, is it possible to weld it up
I have the same thing with one off my wheel but I got new wheel not going to risk it snapping doing a jump
No don’t weld it because you will warp the wheel
Hey man I'm a big fan of the Channel you supply some great videos
your such a nice person thank you for your informative vidoe's.....dude
Great video but the audio is missing for 75% of the video tho.........
Bruh love this channel
If I had a spare part that i wanted to sell is it possible that you could post it on your site?
Can u weld a engine stand and make a video how to? Would be cool to see something like that on your channel:) like your videos bro, seems like u have everything under control:)
Powder coat them yourself in a magnesium tone. Give them the factory look.
Hey man.......... I want to see you reaseemble the engine.... Big fan
Why is your website down?
Hey cam what happened to the crf bars?
CHASE EKINZ 42 I did the giveaway on Instagram
Cameron Niemela ok POV your vids bro there so addictive
Great vid as always
genius . Keep the videos coming 👍
when will you come to Finland and meet with other moto enthousiasts?
I’m here only for the washing 👌
i hope you make it an RC replica. thatd be sick.
kashima coat the hubs!!!
What happened to the audio ?
Videos 10 & 11 Deleted! Why?
Your videos are better than your brothers
th-cam.com/video/c8lK5Gtk8Ys/w-d-xo.html
depression
I just buy new spokes and cut the old rim off using bolt cutters on the spokes.
Boil ur aluminium parts in antifreeze works great
Nice video
Keeepvup hard work
your last name is same as my mom's. greetings from finland ;)
Nope. Not a ton of force. Just how the force is applied. I bent the rim on my XR650L hitting a paving stone just right. Funny thing was, i di that out in nature. Hidden in the tall grass. Not going fast, just clipped it just right.
What’s up with the audio
I didn’t know spikes had nipples🤣🤣🤣
شكرا لك انا من العراق انت جيد
This will awesome when it's done #2stroke
Dude that is the most horrible sprocket ever!
I bent my crf125 from rim
My friend don't think to stop . Then take off video )
Are the facts true you live in Washington
No need to buy the bearing puller... rent it for free at autozone
Been a week
❤❤❤❤❤❤❤❤❤❤
Poor rims
لو صابغ الويالة احلة تطلع
suomi
This slow process ughhh
honda scrap
Please pin this and reply i have a 2005 klx 125 are they good bikes?
2004klx125 rider if your a beginner they're pretty good to learn on but if your looking to get pretty decent at motocross maybe should consider an actual mx bike
Why would he pin that
thanks Cameron the vid gave me alot of ideas freshen up my excel wheels off my rm 125.
Nice video
thanks Cameron the vid gave me alot of ideas freshen up my excel wheels off my rm 125.