I'm a mechanic for over 30ish years. Loveeee to learn from other people. I'm in the United States.....but I watch these video to remind me that even with technology.....never forget, there is a way to fix things. Thank you for sharing your skills.
Je vis en France et je bricole pas mal (moto, voiture) et quant on voit avec qu'elle facilité cet homme redresse la jante avec rien comme matériel, ça mérite le respect !! Nous en France, la jante partait directement à la poubelle 😂😂
Amazing skill and experience..that rim was seriously bent ..i have been building bicycle wheels for more than 40 years and i would not attempt to straighten something damaged so badly..
Я так тоже когда-то ремонтировал колесо от велосипеда. Это был первый и последний раз, когда я решил делать это самостоятельно. В итоге просто купил новое))) Пакистанцы - мастера на все руки. Этого не отнять.
Not the 1st one he's done! Have done this occasionally, but would not have believed the result with a rim as buggered as that. No substitute for experience & need. Great work.
I've been doing this job for over 20 years and that ring is easy to straighten because it's literally a tin can. The challenge is when you have to straighten a wider hoop (1.85) or one made in Japan. When assembling it, the direction of the rays could have been reversed. Furthermore, although it cannot be seen well, I think that when assembling it, a couple of rays were mixed together (18 rays are long-headed and 18 are short-headed). The worker only cared about making sure that the ring was in the center, but he did not take the trouble to remove all the small marks that he might have (some are only 1 millimeter or less). In the end he gives the impression that once the wheel was in the center he did not take the trouble to adjust all the spokes and re-center, what I would call the fine work, which is when the rim is 97-100% perfect. . ALL spokes must have a similar tension. I doubt this is the case; I give it 65/100. I liked the video anyway and I got a couple of interesting ideas.
Amazing skill to be able to straighten such badly damaged,had to watch to the end a true Master at work.Blessings from Steve&Theresa Rainham Essex England
Respect! In Norway, I have to travel several miles to even find a shop being able and the cost in total including repair would be around 200-250 usd.......It would also take 2-3 weeks.....
I work in the repair and maintenance of motorcycles in Mexico, this same job only with a different method and with a straight rim I did it in 1 hour, I have never tried to straighten a rim like this, with a cost of 350 Mexican pesos equivalent to 20.45 American dollars, cheap don't you think
Real artisans, they are so able, we in EU are so spoiled and lack any motivation to repair... just throw it away and buy a new one... This is so satisfying to watch, people that still know the value of things.
❤😊outstanding job guys job well done thanks for your time and effort to make these videos and show them how hard it is to fix them and your do it right specially if you don't have the right tools to do it. Love your hand work and greatly appreciate your time and effort on your work job well done two thumps up. 😊😊
Qué señor tan rápido para arreglar un Rin. La experiencia no se compra por kilos se adquiere por pedacitos me dijo un señor una vez dándome un consejo. Pero ahora viendo trabajar a este buen hombre si es muy cierto el consejo.👍 Este señor debería trabajar en la NASA.😊 Me gustó mucho el vídeo ya tienes un suscriptor más saludos desde Cúcuta Colombia 🇨🇴🚴👍
I can tighten / loosen spokes, to make the rim TRUE again. BUT, i've never straightened a run-over bicycle rim......Good boy ! Perfection, in life, is a question of BALANCE - between opposite forces. ALL , except in human nature - evil is an UNBALANCED situation.
Straightening the rim is the most important step because if you leave it slightly bent the spoke tensions will be all over the place and the wheel will fail very quickly.
Индусы как истинные цыгане, не скупятся на магию. Большой брат правил один диск, со ржавчиной внутри, да и немного пошире был диск, чем тот который спицеватель собирал) При заспицовке ржавчина с внутренней поверхности диска исчезла. Magic)))))
That is quite amazing doing it by eye i had to machine brake drums from a motorcycle mechanic who respoked motorcycle wheels when they tighten the spokes it can pull the brake drun out of shape makes it run out i had to machine them on a lathe
Bizim ülkemizde bu beceriye sahip ben dahil yüzlerce usta var. Bizim halkımız genelde yenisini tercih eder. Dikkatle bakarsanız zıplamayı yeterince düzeltmedi. Biz daha iyisini yapmaktayız.
These are hands on learning people. They learn from doing. Don’t throw it away fix it. Some of the smartest people on earth.
i could bet that the fat guy has never laughed a day in his life.
Qaafhadgaglbclvkxqwrasjnbqdrfjjgvkcgsqsfsghfykshgabb
Огромное спасибо за интересное видео! Мастеру желаю крепкого здоровья и долгих лет жизни!
Thanks
Qa@@CreativeHands78778
09
I'm a mechanic for over 30ish years.
Loveeee to learn from other people.
I'm in the United States.....but I watch these video to remind me that even with technology.....never forget, there is a way to fix things.
Thank you for sharing your skills.
Thanks for watching!
Je vis en France et je bricole pas mal (moto, voiture) et quant on voit avec qu'elle facilité cet homme redresse la jante avec rien comme matériel, ça mérite le respect !! Nous en France, la jante partait directement à la poubelle 😂😂
Amazing skill and experience..that rim was seriously bent ..i have been building bicycle wheels for more than 40 years and i would not attempt to straighten something damaged so badly..
Feigling !
They swapped the rim almost at the beginning of the process.
You would if you had to walk.....
You couldn't beat the crap out of aluminum with a hammer?
He is quite good! I did the same thing with a homemade truing stand when I was a kid, but took me much longer.. This guy is crazy fast!
Я так тоже когда-то ремонтировал колесо от велосипеда. Это был первый и последний раз, когда я решил делать это самостоятельно. В итоге просто купил новое))) Пакистанцы - мастера на все руки. Этого не отнять.
Да, с колёсами это нечто, ну их нах.
@@user-dr7zn2fi9w колёс 15 - 20 ? Или спиц ?
Absolutely amazing! Who else would try to salvage a bent rim like that?
Impoverished peoples
Not the 1st one he's done! Have done this occasionally, but would not have believed the result with a rim as buggered as that. No substitute for experience & need. Great work.
Got to invest in some steel-toe sandals!
Pakistan is full of talent and hardworkers. ❣❣❣
Thanks
That sit on their butts all day
Мастеру огромное уважение! С приветом из России.
Thanks
ШИКАРНЫЙ мастер 👍👍👍👍👍👍
thanks
Благодарю вас Creative Hands за отличное видео ! Человек умеющий хорошо делать свое дело. Ни когда не пропадет !
I've been doing this job for over 20 years and that ring is easy to straighten because it's literally a tin can. The challenge is when you have to straighten a wider hoop (1.85) or one made in Japan. When assembling it, the direction of the rays could have been reversed. Furthermore, although it cannot be seen well, I think that when assembling it, a couple of rays were mixed together (18 rays are long-headed and 18 are short-headed). The worker only cared about making sure that the ring was in the center, but he did not take the trouble to remove all the small marks that he might have (some are only 1 millimeter or less). In the end he gives the impression that once the wheel was in the center he did not take the trouble to adjust all the spokes and re-center, what I would call the fine work, which is when the rim is 97-100% perfect. . ALL spokes must have a similar tension. I doubt this is the case; I give it 65/100. I liked the video anyway and I got a couple of interesting ideas.
4:39 you can tell right here when he spins it how the tension is way off on one side. I imagine the hub is 2 or 3 mm off center, if not more.
Amazing skill to be able to straighten such badly damaged,had to watch to the end a true Master at work.Blessings from Steve&Theresa Rainham Essex England
Hi dear h r u
I have machine wheel balance this rim whit in five minute start
I m fine and u
My TH-cam channel jafar wheel balance
@@hashirshah4570hi
1:56 com ferrugem
4:50 sem ferrugem
É o mesmo aro? Acho que cortaram a parte da limpeza e o acerto das bordas.
That end bit reminds me of how I tighten my snare drum!!
That was bloody awesome.🇮🇳😎👍👏
Thanks
Hello to Pakistan 🇵🇰 from Czech republic 🇨🇿
Hey Welcome To Pakistan
The steel wool on the chrome rim was a nice touch.
Эти монотонные видео с пакистанцами всегда дают поздно ночью, потому что под них хорошо засыпать
Watched a motorcycle guy lace up a rear Harley wheel for me. Amazed how fast he did it and it took minimal effort to get it to run true!
What's that got to do with this video? These people ride real bikes and use true hands on skills!
Cerdas euy.......! Sdh beres lagi bagus kerjaan nya cepet. Mantaaaf.... Sae/toyib
Thanks
Respect!
In Norway, I have to travel several miles to even find a shop being able and the cost in total including repair would be around 200-250 usd.......It would also take 2-3 weeks.....
I work in the repair and maintenance of motorcycles in Mexico, this same job only with a different method and with a straight rim I did it in 1 hour, I have never tried to straighten a rim like this, with a cost of 350 Mexican pesos equivalent to 20.45 American dollars, cheap don't you think
Can't do it yourself? Hands growing out of your ass? Pay the money, bitch.
@@Sundercorpthese types of rim repair 1 dollar and 1 hours
First time in 30 years I see a wheel spokes the right way
Thanks
What do you expect, it’s India, creativity thrives there. A lot more ingenuity than Americans.
काफ़ी अच्छी मेहनत हैं आपकी 🙏🙏🙏👍👍👍
Thanks
@@CreativeHands78 आप कहां पर रहते हैं जी
İşini severek yapan herkese selamlar olsun,usta çok ciddi bir karakter çok beğendinm tarzını.Allah işinizi gücünüzü rast getirsin,kolay gelsin.
Que agradable verlo trabajar, muchas gracias!
Thanks
Alhamdulillah Alhamdulillah very nice work Brother. Masha Allah Halal work
Thank You
Great job 👍
Thanks 👍
@@CreativeHands78 You're welcome
@@CreativeHands78 You're welcome
Zabardast ustad mohtram zabardast correct hi correct
Shukriya!
👍👍👍 я как то на детском велосипеде убирал восьмёрку на ударенном колесе, на удивление постепенно получилось главное терпение
Работа сделана на 5+, вы отличный мастер
Thank you
Хочу попросить сделать видео, о том как нужно крутить спицу и какую, подробно, спасибо
МАСТЕР от Бога !!!
Thanks
Астоящий мастер своего дела! Отличная работа!
Thanks
асидящий
Алежащий!
Глаза боятся,руки делают. © Джейсон стетхем
@@ug123krd да шёл бы полем твой стекхем, так везде говорят.
Real artisans, they are so able, we in EU are so spoiled and lack any motivation to repair... just throw it away and buy a new one... This is so satisfying to watch, people that still know the value of things.
❤❤❤ممنونم استاد باشکوه ❤❤❤
Ne farà anche cento al giorno ma è bravissimo, e che manualità…..chapeaux
❤😊outstanding job guys job well done thanks for your time and effort to make these videos and show them how hard it is to fix them and your do it right specially if you don't have the right tools to do it. Love your hand work and greatly appreciate your time and effort on your work job well done two thumps up. 😊😊
Thank you very much!
Просто мастер класс своего дела.Других слов нет.!!!😮
Thanks
Този човек има златни ръце!
Thanks
Серьёзный дядька...Профессионал!! 😅😅
Yes Off course 😀
Estas personas son talentosas mi pregunta es por q casi siempre trabajan en el piso
Almost impossible to find such master class spec in my town.
The man has the eye!
모든걸 고쳐쓰는 지구가 엄청 건강해 지는 영상.
master of wheels
Thanks
Wow he has done that before....top man.
Thanks
Numero uno 👏congratulation from Albania
Thanks
Ты хороший мастер, удачи тебе в твоей работе
Thanks
В детстве так же ровнял, только чуть по проще походил по колесу и 10ка 🤸♂️ 😂 едем дальше
Вы классный МАСТЕР 👍💪🏻
Thank You So Much
Мастер
а своего дела,Мастера с большой буквы
Thanks
Qué señor tan rápido para arreglar un Rin. La experiencia no se compra por kilos se adquiere por pedacitos me dijo un señor una vez dándome un consejo. Pero ahora viendo trabajar a este buen hombre si es muy cierto el consejo.👍 Este señor debería trabajar en la NASA.😊 Me gustó mucho el vídeo ya tienes un suscriptor más saludos desde Cúcuta Colombia 🇨🇴🚴👍
Thank You So Much
Как называется его профессия? Колесо разгибатель?
Развосмёрыватель.
Great job!! Amazing congratulations
Thank you!!
The wheel builder is Such a happy chappy 😂.
Excelente trabajo saludos desde República Dominicana
Thanks
I can tighten / loosen spokes, to make the rim TRUE again. BUT, i've never straightened a run-over bicycle rim......Good boy ! Perfection, in life, is a question of BALANCE - between opposite forces. ALL , except in human nature - evil is an UNBALANCED situation.
Yin and yang
Chapeau bas....
Rim changed successfully ✔️🌚
6 months with these guys and you could build your own bike
Son muy trabajadores y muy eficazes chingones pa pronto
Mechanics Unleashed
Master class
Thanks
Bravo travail de pro 👍
Thanks
Straightening the rim is the most important step because if you leave it slightly bent the spoke tensions will be all over the place and the wheel will fail very quickly.
Good job 🙋
Many many thanks
a real creative accurate hard work bro.. thx
Thank you too
És um grande artista parabéns pelo seu trabalho Deus abençoe você amigo
Thank You
Super HABIB😂
Amazing skills 😮
Thank You
Индусы как истинные цыгане, не скупятся на магию. Большой брат правил один диск, со ржавчиной внутри, да и немного пошире был диск, чем тот который спицеватель собирал) При заспицовке ржавчина с внутренней поверхности диска исчезла. Magic)))))
Çok temiz ve güzel bir çalışma inanın sizin ülkenizde yaşamak için can atıyorum yanınıza alın bende sizinle çalışayım...
Thanks
Welcome
Einfach sensationell mit welchen Mitteln er ein Rad wieder instand setzt, handwerklich top!!
Excelente trabalho 😊
Thanks
you are great at doing that.awsome.
Thank you so much 😀
Helal olsun ustaya. Bravo
Thanks
bravissimi tutti !
non serve dire altro . complimenti
Ein sehr guter Handwerker 👍👍👍
Thanks
Le falto decir "sigan viendo" para que quede perfecta la rueda!
Thanks
Briljant echt geweldig goed .
Thanks
You welcome
Fenomeni bravissimi maestri 🎉from Italy
Thank you
Jor dar he bhai
Trabalho muito bem Feito Parabéns.
Thank You
Tuyêt vơi ,đep ngươi ,đep rân đep ca tâm long,chuc ban nhiêu hanh phuc❤
Thank You
Complimenti....👍🇮🇹🖐️
Thanks
Excelente trabajo amigo, eres un genio.
Thanks
Amat dahsyat,rim bengkok pon repair balik gayezzzz 😳🤔 bukan biasher² ni
A true craftsman.
Thanks
That is quite amazing doing it by eye i had to machine brake drums from a motorcycle mechanic who respoked motorcycle wheels when they tighten the spokes it can pull the brake drun out of shape makes it run out i had to machine them on a lathe
They don’t care if it’s out of shape in Pakistan! 😂
@@annoyingbstard9407 Where's your eyes? It's not out of shape, works perfectly! If millions do it there must be a reason!
wonderfull mechanic
Thanks
I like Bangladesh
Excellent!
Thanks
Bravo!
Thanks
São excelentes profissionais, merecem todo respeito ifrom Brasil like.
Thanks
Nice job😮😮😮
Thank you very much!
Bizim ülkemizde bu beceriye sahip ben dahil yüzlerce usta var.
Bizim halkımız genelde yenisini tercih eder. Dikkatle bakarsanız zıplamayı yeterince düzeltmedi.
Biz daha iyisini yapmaktayız.
Good luck Bhai
ThanKs
Excellent job 👍
Thanks 👍