ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Cam Tuning For Crank and Idle, Getting That Aggressive Cam Dialed In On The Superado!
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2020
- Support Those Who Support The Garage
For more tuning content check out our partner Elite Tuned School:
www.elitetuneds...
Check out the latest tuning courses and classes and don't forget to use code "goatrope" to save 5%
QA1 Motorsports: www.qa1.net/
Nitrous Express and Snow Performance:
www.nitrousexp...
Check out HP Academy: bit.ly/3kobFJZ
Use Code GOAT75 for $75 off!
We use ICT Billet for brackets and more, the best prices for the highest quality parts:
www.ictbillet.com
Links and Merch
Make sure to swing by the Garage's website and pick up your own "Tuned By Me" decal at www.goatropegar...
All Patreon members get early access to videos, special Patreon only videos, giveaways and merchandise. Tuner Tier Patrons gain one on one tuning assistance from the Garage, check it all out below:
/ goatropegarage
Check out our merch store for all your GRG gear!
teespring.com/...
The Garage uses AEM wideband sensors/gauges, grab one below:
amzn.to/33VU1T5
Get your own HP Tuners MPVI3:
amzn.to/3Wmt0pJ
Find the whole Tuning Series Playlist here:
• HP Tuners 101, Tutoria...
Check out the Quick Tuning Tips Playlist here:
• Quick Tuning Tips
Business inquiries can reach us at: info@goatropegarage.com
E-mails requesting tune support will be ignored, please use the Patreon for tune assistance. / goatropegarage
Goat Rope Garage is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
This channel is worth so much more than 2 bucks a month. I can't even get my eyes on information and education like this without paying out the ass on tuning school. I'm a tuning book course cost deep. Don't regret it, it gave me the confidence to know what I was doing wasn't going to hurt my engine. Still peeling through jt. But these videos are absolutely the sequel of that book. It's all that information after your first training wheels tune. I hope he is rewarded enough to keep this channel around for a long time. So valuable.
I fought my car all day long, until I watched this video. Made the recommended corrections in my tune, and the car started right up. Thanks GRG!
Look here Kyle. It must be the Kyleness that we both share, but I cannot believe you posted a video literally THE DAY I'm trying to tune a trick flow cam. Fancy.
i also found with mine gen4 that with a camshaft (or less compression) if u have less advance for cranking it can help, less advance means the piston is further toward TDC and thus more compression has been achieved so it may ignite easier, i was in the 3-5 deg cold at the rpm it cranks over worked well
I'll test it out, I was in that range before and it struggled but the fuel was still a bit too rich
I’ve had some short sighted success with varying the block of idle cells in my VE. Like you said you can get enough flow rate to get consistency. If I have a lean cell on the under idle cell and a rich cell on the over idle cell while the cam oscillates and idle corrects to target rpm the lean rich in the correction area helps it from just loading up under extended idle. New to tuning and tried this the last couple days on my car. Seems to help
Yep. I just got my Vette dynoed after a stage 3 cam and 243 heads. Made 408 hp. But rhe tuner said he will charge extra for cild start tuning.
That’s mind blowing. If it doesn’t cold start it’s not tuned. What a dirt bag.
I apreciate all your videos. But that being said, I am very happy to see a new TUNING video! Thats the reason I got hooked on your channel originally. And btw, the truck is SICK!
Oh man. I am getting excited...can't wait to hear this thing rip. I got my cam and crank bolts on order...hopefully if they get here by the weekend and weather is good I will have my blower cam installed and be ready to tune it. Then I just gotta save for the blower kit and fuel system.
Really woke up the blower, making a lot more power at lower pressure
@@GoatRopeGarage Nice I am trying to save up for a maggy over the lsa...you know for activities. HAHA I would probably have to max out an LSA just to make it to 14psi on these heads. Maggy im looking out is a 2.3l but its like 2x the cost
Save your money and don't spend it twice! I've got the bad habit of not buying big enough, within reason
I just got my cam and valve train done this last weekend. I swear, you time these videos perfect!
You rock, greatest videos on tuning for sure.
What atout EOIT? If it’s left stock would it dump fuel with the new overlap?
I can't wait to start my rebuild project!! I'm a Tuner Tier patreon member and will definitely be asking for best tips for my rebuild! Over 100HP going into my 2012 Sierra!
Maaan im so glad you came out with this video! Just last weekend I just swapped my gen 4 stock 5.3l out for a gen 4 built 6.0l and i have been having no luck with the start up portion of it! But now this is out, I will definitely be starting over with the tune and go from there! One thing I am having trouble with is trans tuning with a higher stall converter 🤔.
Hey boss, I just got my heads/cam gen 5 viper motor back 3 weeks ago. Before the rebuild it had a generic tune which was pretty decent.
The motor was rebuilt with the same or "similar" parts but now on the dyno, there's about 50whp missing. Could this be due to it needing a new tune despite the same parts or could the builder be pulling a fast one?
I can get my f35 cammed ls3 to idle, but I give it throttle and it dies! Throttle is working. I have aces EFI.
Great info like always! Thx
Good video .... Just mention the fuel your tuning for ... This was my first video from you,r channel so i didnt have a clue
Kyle quick question plz. 427 sbc stroker..heavy cam. around 5hg at idle. I'd like to run an HP mpi set up. will this heavy of a cam work with this set up or will that low vacuum wreek havic on the map sensor in differnt rpms? just need to know if I can work with the cam I have ..
anyway i can send you tune that was on my car when i got it i got hp tuners and when im logging its super lean at cruising speeds and low rpm /manifold pressure has big cam just rebuilt motor i daily it more than race it fuel seems ok when i stomp on it just trying to learn
Is it possible to add more tables into the OS? My ecu doesn't have all these tables under spark
Make sure you are viewing it in advanced
Edit>View>Advanced
Can't wait to see it run Kyle !!
My graph in my mpvi2 is showing up as black how do I change it so i can see it in color again?
So would the cranking VE primary effect me if I running in the maff or is this strictly SD?? I went ahead and dropped it to 80 as well. Thanks brother can’t wait for some more
SD, there is an airflow cranking correction for when in MAF
Goat Rope Garage awesome I’m going to look at that right now and if I have anymore trouble I’ll email you cause I’m special cause I’m a Patron for those who are not patrons lol thanks bro seems there is a lot I’m over looking .
My start up is good but after about 4 to 5 seconds its stumbling and eventually catches itself.......still mid and upper RPM is lean
I have a 1996 f150 with a 302 I recently did some work on it has the obd 2 is it tune able?
Can gm trucks run methanol in the fuel system. I know e85 is okay, what about methanol, straight in the tank, not an injection kit
Im new to the channel watched a few videos now where are you located if you dont mind me askin
I was hoping to hear another engine startup :)
You do anything for auto phasing?
Hey Kyle, I’ve been watching your videos for a month or so now and I’ve just got hp tuners last weekend. I’m trying to tune my 2004 Silverado 5.3 that I built the motor in. I’m having issues with the idle when I put it in gear. It will idle fine, then drop to nothing like it’s going to die then pick back up just before it dies. I think it may have something to do with the heads being ported and the cocker arm bolts leaking, but I used sealer on them. Anything I need to look into before I swap heads? I’m installing my aem wide band this weekend maybe that will tell me something
Get the wideband in, might be overly rich causing the dip and check your idle setpoint in gear, it's separate, might need to bump it up
I have cam surge can’t figure out how to do timing at calculator specs before I ruin my motor hitting valves worries me please help
Try and set a static timing of like 15 degrees in the editor and focus on getting a good airflow dialed in for idle then let the timing do adjustments after
Thanks for your help Kyle but don’t know where I would set static time or just do a base spark at 15 and how do I tune air from intake not from exhaust to stop bucking and sucking
Can you talk about EOIT for a larger cam. For IV gen. ;)
easy way to start on it is under "injection timing" set the normal RPM table to all zeros, set boundary to all 520, then in the normal ECT table the 110 cells lower those by 5 each time until u see your idle trims/WB show richer at engine operating temp, once u change it and it dosnt go richer leave it there on the last change and adjust MAF/VE/VVE to correct, depending on overlap u could be in the 75-100 range ( stay within that range is best and ramp back to the colder values) thats now where u know u are getting most of the fuel in the chamber and burnt, then only use the Boundary for adjustments and keep them smooth between cells on the 2D, leave idle rpm cells as they are and from then on u can increase the number to delay it more as rpm increase (prob wouldnt go further then 580 up top) just see what it likes as its best with a dyno so u can see any gains as u may be able to put more spark timing into it also, or just leave it at the boundary all 520 after adjusting the ECT so idle will be better, boundary - ECT - RPM = EOIT in crank deg
Is it just me or is the video too blurry to see anything?
Can you help me tuning my car if i pay you?
Hey man, I’m hoping you might have some time to give me some feedback I’ve had for tuners tune my truck The last one said he could fix the jumping issues at a stoplight, was unable to keep the cam from pushing through the torque converter. I only have a LS three with a truck, Norris cam and a stock 6l80 what do you recommend?
4 Tuners
Looser converter
People learn by seeing also