Can This Audi Engine Be SAVED? Coolant Mixing into Oil
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Oil mixing with coolant is normally a head gasket. This Audi engine wasn't a bad head gasket, but still had oil and coolant mixing issues. This video we flush the engine oil in an attempt to save the engine. The best repair for coolant in the oil is a full engine teardown to check/replace bearings. This car is NOT WORTH THAT!
IMPORTANT LINKS
3.0 PCV replacement DIY ~ • How To Replace Audi 3....
Oil Funnel ~ bit.ly/2mHDyRr
Liquimoly Oil Flush ~ amzn.to/3gVsrQQ
Liquimoly Mos2 ~ amzn.to/3UaJz3S
Liquimoly Ceratec ~ amzn.to/3DKyKQf
Milwaukee Wiz Wheel ~ amzn.to/3UfhAQi
S4 PCV Kit ~ bit.ly/3TlFkSB
Green Roll Disc ~ amzn.to/3NkYrKc
S4 Video Seires ~ • Audi S4 Videos
~~~~ Support the Show ~~~~
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.co...
Shop Amazon ~ amzn.to/2FQErAm
Audio ONLY Podcasts ~ goo.gl/5XcZxB
~~~~ Recommended Tools ~~~~
Impact driver ~ amzn.to/2HsxS2H
Small Impact driver ~ amzn.to/2DZdsMN
Electric ratchet ~ amzn.to/2FydxMS
Magnetic tray ~ amzn.to/2FEpQ6g
Basic hand tools ~ amzn.to/2GnjF7K
Box wrench set ~ amzn.to/2FzoJch
ScrewDriver set ~ amzn.to/2FEjcgd
Shop towels ~ amzn.to/2FC7UgM
Torque Wrench ~ amzn.to/2I7ke5h
Allen Sockets ~ amzn.to/2GlcnAz
Torx Sockets ~ amzn.to/2pL0SfL
~~~~ Playlists ~~~~
Humble Mechanic Podcasts ~ • The Humble Mechanic Po...
Project White Wookie ~ • MK3 VR6 GTI Project Car
Failed VW parts videos ~ • How VW Parts Fail
Tool and Product Reviews ~ • Tool and Product Reviews
How To videos ~ • How To Fix Your Car
MK1 VR6 Swap Videos ~ • VR6 Engine Swap MK1 Ca...
~~~~ Be sure to follow me at ~~~~
humblemechanic.com
INSTAGRAM ~ / humblemechanic
FACEBOOK ~ / humblemechanic
TWITTER ~ / humblemechanic
Amazon Store ~ www.amazon.com...
disclaimer:
The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle, nor does it create a relationship of any kind between the Humble Mechanic and you. Every situation may be different, and the Humble Mechanic does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. The Humble Mechanic and any sponsors of this video will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information and automotive parts portrayed in this video solely at your own risk.
TH-cam SPAM IS OUT OF CONTROL! I will never contact you for your info or to message me anywhere like WHATSAP! DO NOT click that stuff on any TH-cam channel
It was just a joke😂
Amen!!
Yup. Report the suckers every time you encounter one.
It gets even worse when they post a pirated contact what they do is if you leave a comment linking to your actual comment then they report YOU as spam.
❤
All I can say is this, sir you are an absolute rock star! Thank you for doing all that you do for the community.
You, sir, are a legend! The only bad thing about your videos is that they end! =(
Thanks for the hard work and all the information you provide. Cheers from Brazil!
It was definitely worth a save.
Do keep us updated on long term reliability & mileage.
Hey charles! Love the content even if it doesnt apply to me. You always make entertaining videos and i learn something from you. Just want to say thank you!
I really appreciate that ! THANK YOU
Awesome video. I am a big believer in flushing an engine when they gunk up. Good job man.
As opposed to promoting more buildup?
@@MycketTuff No some people only replace the filter and change the oil once, while he changed the oil until it ran "clear" and cleaned the oil pan 2X of the residue.
"Better call Paul" - pretty catchy. He should use that as a slogan. :)
And - btw. - I'd have done exactly as you did, C. I would perhaps, just out of curiosity, send the last flush sample to be analyzed too see how much coolant remained - if any.
Charles, you just broke my world! I've done probably 15-20 oil changes with LiquiMoly and I never realized there was an oil change sticker ON THE BOTTLE. I'm so mad at myself for never noticing this. How could you do this to me?
Hahah that’s how I felt when I learned that!
Huh I never noticed either. But I do 5k intervals on my ‘19R so it’s hard to keep track… unfortunately my alternator last month failed 1000 miles out of warranty, and it gave my its first epc & cel last week… suspecting injectors 🤦♂️ I also went eqt stage 1 right after my warranty ended so no chance of getting either of those covered anymore…
Ok Charles, here's one for ya. 2006 Honda Ridgeline. The oil cooler/ radiator cracked and antifreeze into the oil. Replaced radiator..So, the system was drained and we added water and a dawn dish washing liquid, did that eight times cooling system .. obviously and a few oil changes with sea foam and refilled with factory authorized VW coolant (kidding) and sent it..i understand that this is Audi VW show but guess what.. the pistons go up and down, the wheels go round and round... you're a good teacher by the way. I wonder if there is a way known to man to re-engineer the pcv system on that engine?
I love how honest you are about if that was the better route. Love the content man!
Thank you Charles! Same problem with my daughters Audi q5 and replaced the PCV...working like a champ. Made me look like a master mechanic to my family. ha
I’ve had to replace a few engines on my Subaru. I like that you love Audis and VWs, HumbleMechanic!
Thanks for educating me on my VW vehicles love your videos and content. Great job keep it up.
That ending where you cut the see right before was beautiful 🤣
Killed it as always Charles. thank you.
"A little noise from the timing chain, it's fine...." FORESHADOWING! 🤣
You could have easily keep the flush for an hour or so and rev it up to around 3000rpm for 20-30 seconds every once in a while, I usually do that when changing the engine oil and it may clean the engine better than just 10 minutes of idling. There are also "long life" engine flushes available where you can drive a car reasonably for 30-50 kilometres before replacing the oil, that would've been great for this particular engine imo.
Liquimoly states to idle and not rev or drive. You don’t want the crude being knocked off to circulate at a elevated rpm to score the internal as the crap coming off is abrasive. Keep wrenching my friend.
@@TooBlessedToStress88 yeah Archoil states NOT to drive your car, yet their technician says you can drive no worries for around 50km, it's just a fail safe for the company
Looks like Bob Ross mixing paint in the intro
Awesome video yet again from the one and only Humble mechanic 👌 Reminds me or how I like to treat the inside of my engine and customer's when servicing, I'll always change oil first before using a flush (if the engine oil is too old or feels physically garbage)
Then it's the safest way to thoroughly flush the engine without much risk of further damage..
Liqui MOLY for the win 💪
I use their flush, conditioner and fuel treatments, I also use LUCAS oil treatments and BG products 👌
Love the attention to detail in all your videos thankyou for the content
Much 💜 from the UK
1.9 tdi PD. This engine got me mad years ago (and still), the fker mixed drop by drop the oil in the coolant system passing throught the head gasket, the coolant was fine but after some months the coolant looks really bad. What a pain in the ass, amazing engine, amazing troubles...
One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?
Of course it was the right course of action what you did. No need for opening up an engine if that process fixes it and it was the pcv that caused all of this..
Keep it up humble mechanic 🦾🦍🔧🧑🏼🔧🏴☠️
Just a little noise from the timing chain - its fine Outstanding video
Bravo.. I wish I was there to work with you.. Machine's, Repairing, Maintenance, Overall care, etc.. Love from India.
@Main_HumbleMechanic Thanks! Dipak here
I’m like, how does he know people put their hand behind products in make-up reviews, then I’m like… why do I know that too? 😂
😂😂😂
Great video, however the oil filter clips into the cap and then is inserted into the housing. There are tabs on the cap for the filter to grab into.
Now, why would I do that Spammer.....
Just a little noise from the timing chain, it's fine. 🙂
Milkshake is not what you want to see in an audi. I picked up a B6 A4 1.8t 5 speed with some good performance goodies that had a blown timing belt for super cheap. Made the mistake of getting a "tested" head on ebay. When got it I knew I should have taken it to the machine shop to test it all myself instead of just believing this place but I didn't. Ran great but after it got warmed up oil and coolant mixed very quickly. I thought maybe it was possibly my doing so I did it all over again triple checking everything with a better brand head gasket. Same thing. When it got warmed up... boom immediate mixture. Finally took it in to the machine shop and of course cyclinder 3 on the head had a crack and when it got warm it was expanding and mixing. I was pretty upset to say the least. It's a good thing I was constantly checking oil and I caught everything quick. With a proper rebuilt head and a few flushes it was good to go. But you just know even running 30 sec with coolant in it has some consequences. I'd say it just depends how long he was driving it after that coolant light hit. Awesome how a failed pvc can lead to total engine failure. Way to be Audi.
My a7 is in the shop for this right now praying it is not a gasket 🙏🏻
I was looking into a b8 s4 and thanks to this and your recent video on this I know about the pcv coolant issue (all euro pcv is shit) informative video! Meeting you in person and seeing your vids after it’s crazy how you’re the same person 🤣
The comment about being the same person means the world to me! Thank you
An alternative I learned from growing up on the farm fill the engine all the way up with diesel instead of oil and leave the cap open overnight and Then drain it What I mean by all the way up is literally all the way up to the cap and do not start the engine like that
The best thing about Royal Purple oil is that if you forget the drain plug on the sump you can see it on the concrete.
If there were pumpkin spice oil maybe I could get my wife to do her oil changes. 😂
To save money in a similar situation I've taken the oil out of other cars present to use for a flush. Those cars get an oil change and I don't feel like I'm totally wasting fresh oil.
260,000 miles. Even if it doesn't work that car owes the owner nothing. Let's hope it does work. Hope you do a follow up.
Agree. Not sure how old this one is.
It would be good to mention that the other 4 bolts for the oil cooler (besides the one that goes into the pan) are aluminum and will break the head off extremely easily if they are over torqued.
Could you quantify how good it would be?
I feel that if you don't check every other possibility before the headgasket.. its gonna be the headgasket 100%. Idk why
I'm starting engineering at university in a couple of weeks. My Goal is to work somewhere at VAG (and convince engineers to use less plastic in engines lol)
Pull out that package of JB Weld, bubble gum, bailing wire and duct tape. Something in there should fix this right UP !
😆
ACCOMPLISHED HUMBLEMECHANIC
TUTORIAL BRILLIANT VIDEO AMAZING THANK YOU VERY MUCH FOR SHARING IT. TAKE CARE AND HAVE A GREAT EVENING WITH ALL YOUR FAMILY AROUND YOU
ACCOMPLISHED HUMBLEMECHANIC
From Nick Ayivor from London England UK 🇬🇧
I’m still waiting for some 3.6 videos
Heck I’d lend you my car for some since it needs the chains done anyways but I believe I’m a bit far for that
LiquiMoly stuff is one of the few potions you should use in your car.
This is among my top 5% channels, I just wish you'd do more builds, tying together the knowledge-oriented content you produce.
Sure I can go somewhere else for VAG builds but lose out on your personality doing so
Thank you!!!
Builds are coming I have several in the pipe!
Coolant mixing into Oil. Well, thank God the oil didn't mix into the coolant system......wait......?? 😄
Hy! that water was comming from somewere maybe on hy tempereture that mean that the cylider gasket may be damage or gas cooler gasket or gascooler itself
I will say short answer is yes you can save it...but long answer is if a gasket or a designed point of failure like a freeze plug it is not very terrible, but it is not always the go-to failure and then you have to ask yourself...
"I believe I have the willpower to do this, but does my bank account?" Is it worth it again?
Creo que vale la pena hacer todo ese trabajo siempre y cuando se elimine la raíz del problema: porqué se mezcló el refrigerante con aceite? si se evalúa que la reparación no es costosa y que la salud del motor no se haya visto afectada
Hey man I want your honest opinion. I own the A4 B8 2.0 TFSI since 2011. The engine was using 1l oil per 1000km. I got a new Audi motor in 2014 for free as the car was under warranty. Since then no oil usage, just the cooler went bad in 2020. Now the car has 190,000km & it is running perfect. Would you sell the car or keep it for another 200,000km?
Notification squad Have a nice weekend!🔥🔥🔥
That’s the stuff big Mac’s use for choco shakes lmao 🤣
EPR by BG is an awesome engine flush restoration additive, you should do a video on it
Another awesome video!! Now it is time to work on the TT!!😀😀
Great video. I like the joke about reading the directions for the LIQUI MOLY engine flush. There aren't any. Not even an indication that it goes in the oil hole and not the gas hole. I like their stuff. Just think it's funny they don't put any directions on how to use it on the can.
hey, can u make a video where u change the upper chain tensioner ?
I may do that when we manual swap it
@@HumbleMechanic nice, can u show us the vcds steps when u swap it ?
Awesome videos Charles! Thanks you are the man.
I worked in fire sprinklers a while as a younger guy since my step dad owned a plumbing company. Engineers loved to try and shove steel sprinkler pipes through steel HVAC ducting all the time. Looks good on paper right? It would be a great world if every piece of machinery had to be disassembled and put back together by the engineers before it goes into production.
Hey Charles, how has the Audi held up since the PCV repair? I have the same issue, about to do the repair. Thank you!
I have a AUDI Q3 diesel engine same complaint as engine oil mix in coolants
🤦♂️ I've been using Liqui Moly in my 944 and never realized that they had a oil change sticker right on the bottle 😂 genius
Awesome video as usual! But oh man, you should make that outro like a meme or something: "Just a little noise from the timing chain! it's fine!". At least the mazdaspeed community will cheer in some sort of planetary chorus at fixed hours every day for several months in a row :)
Hahhahaha
Awesome video. I have same noise from timing chain I already done timing chain tensioner changed. does it me make me worry?
*When your oil looks like this time to start praying* 🤣
Currently have the forbidden chocolate milk in my mk5 r32, head gasket failed
Wow! That’s super rare!
Hey love you videos. I was just wondering if you could do a video with best and worst VW/Audi engines. Looking to buy and Audi 2023 Audi S3 or a Golf R. Or maybe tell me what you think of those engines.
Thanks
If it's not absolutely W*nkered and it's high mileage, fix the immediate problem and see how it goes.
If it hangs in for another 50-100K that's classed as a permenant cure
Well, I did not have this specific issue, but I got a low oil pressure on my Audi A4 2.0 TFSI four days after I bought it, that was a bummer, and I was so close to my house and decided to drive the last few hundred meters, lucky only the turbo died, and judging by the amount of oil in the intercooler it was already in bad shape so I guess it's not a big deal. but yeah, the oil pickup was full of gunk causing the low oil pressure. It was a pain in the as to take off the oil pan, I had never struggled so hard taking an oil pan off a car before. It's up and running now and I been driving it for a few months, but it had 273K Kilometers on it and I did not pull the whole engine apart, I just put a new turbo on and tried it. But it uses a lot of oil, both before and after the turbo change. I don't know if flushing can help with that.
the manufacturer could add a sensor to the oil pan that can tell if there is water in oil. Basically water conducts electricity so if you measure reduce resistance between two electrodes at cold start it means water in the oil pan. the thing is by the time risk of a failed head gasket starts to increase the car is already too old and manufacturer would like you to buy a new car.
I've been watching your videos for years. You are amazing. Unfortunately, my daughter added power steering fluid (ATF) to the coolant reservoir of her 2015 Tiguan and drove a few weeks. Any recommendations besides flushing several times with distilled water?
Can you get your hands on a 99-05 (MK4 ish) 01M transmission? If so, can you do a video on them and their reliability, or lack thereof.
Welcome back, Iv missed you lol
Could you make a video on how to change the break rotors and pads on vehicles with an Electronic Parking Brake? :)
Thank you Charles. Would you consider making a video on changing the diff fluid on the MK7 R?
I think I have? Wait have I? Lol I did my mk4, it’s pretty much the same. Hahahha now I have no idea
@@HumbleMechanic You're right! Somehow I completely missed that video.
Great job Charles, like new again👌👍🙂
Is it more worth to upgrade the pcv system than putting oem parts
Great question. I didn't really search too deep for a PCV upgrade. But if there is one, probs worth it
Any follow up on this after a year the engine ok? Or it starts put it on for trade-in?
I have a question that stumps me, how and why is your oil and the water smoothly mixing without re-identifying as frothy milk or curd chunks blocking the internal jacket and heater core?
it won't in the HC because there was no oil in the coolant, it was coolant in the oil. But Im with ya, it was like permanently mixed.
@@HumbleMechanic thanks sorry I missed the part about it being a one way breech, but I had to look at the oil again because it looked like fuel flooded past the piston rings, but even that was a better viscosity than fuel logged oil. I am also having a bit of difficulty with trying to figure out how it could happen with modern management and intact block, but I really want to know what caused it to blend as well as it was.
"Honey, do we have any chocolate milk left? My car needs a top up."
Great stuff. I have an issue (bpy mk5) where my oil is getting diluted by gas. I've put in fresh injectors, followed by a new pump. Still getting dilution. I did reuse my autotech hpfp internals on the new pump then put it back to stock but it made no difference. Gas is mixing with my oil. Any advise on what to check?
What engineer at Audi thought that having coolant go through a “PCV valve” monstrosity that is also ridiculously complicated?
Yes.
Every brand has their unique Engineering difficulty...
-Mopar has weak output shaft housings and suicidal clutch discs.
-GM is so aesthetically conscious that you can't get to anything to fix it and even if you can it will require 6 different sizes of sockets
-Jeep has terrible transfer case joints and weak electrical systems
-Ford require a special tool in order to scratch yourself and last for a long time but when it starts to break, it is not going to stop for a while.
And so on... German engineers are a whole new level of special people and will find a way to get a 10 min $20 job to take 4 days and cost a grand.
No kidding I thought changing the one on my 2011 Rav4 was a pain this is ridiculous.
I think the engine will be fine if you flush it out good enough. Modern engines can take a lot of abuse & continue working. I think it being slightly older has helped it.
Hey Charles, what about oil in the coolant?
Wouldn't it be worth checking the head gasket though if it was that it might be I think
My oil looks like after 2nd and 3rd flush, after doing a headgasket? It was the first load of oil since fixing the issue, is coolant still entering oil,
Charles totally off subject, but I noticed you have LiquiMoly banners up and what not, as far as 508 oils are concerned, which one do you like the best and why? Just curious from a VW mechanics point of view. Thanks 👍
Good work
Hello Charles, I have an Audi q7 with the 3.0TFSI engine. There is coolant inside my engine. However, the coolant-oil mixture hasn't circulated through the radiator to the expansion tank. I have checked the oil cooler and I can't find the oil-coolant mixture. I am suspecting my coolant pump to be bad. Could this be a head gasket that is blown? How do I know the bank of the head gasket that is blown if that's the cause of the milky mixture? What else should I check before attempting the head gasket. Many thanks.
My old boss swore by the SC 3.0 in his 2015 S5, he changed the belt and had it tuned... I wonder what % of those powerplants are dead 6-10 years later.
What sealant did you use?
hi charles have you ever seen fault16346 rom error 014 defective before on a a3 8p also no coms to cluster but everything works? i had keys programmed to cluster 3 months ago but i like to hear your take on it cheers from down under
Chocolate coolant? Santa would love this
Pure logic
w pompę oleju w tym przypadku i smok by trzeba było zajrzeć
Hi Charles, I have a similar problem on a VW Passat B7 the thing is that the oil cap didnt have mayonnaise lol (coolant mixed with oil) and so neither the dipstick.
I thought it was the oil filter housing assembly which has the oil cooler attached into it, so I replaced it with a new one and tried to flush it but it keeps mixing oil with the coolant.
I havent done a full drain the engine oil but I dont think I shoud since there is no mix on the oil cap or the dipstick. But heres the thing, it keeps mixing after replacing the oil filter housing and when you rev it spits a few drops of water form the exhahut. Tbh I dont now if its condensation or Im about to lose my mind with this car.
I read online about the oil cooler, sometimes it fails too and you have to replace it in order to stop the mixing. Any suggestions on what should I do next?
How did it go, now that it's been over a year
How reasonable is it to work ob Audi cars? I'm planning on purchasing a 2017 - 2018 RS7 or S8 and would like to do some of the maintenence on my own
Basic maintenance can be challenging on the RS cars. Not hard, but not super easy. Look up some diys on it before starting
The only legit use for SuperTech 🤣
HAHHA FACTS
Charles I just noticed you sound a lot like Conan O’Brien lol 😂
What’s the part number on that Mann oil filter? Looks like an oil filter we use on a converted Mercedes engine for aviation use.
Can you do a ko3/ko4 rebuild video
Can all engines be saved if the head gasket blows