Hey everyone, hope you guys enjoy our latest video. We finally got the body back on the Grumman Van!!! And man is it a tight fit but it’s coming together nicely!!
That cardboard man behind the camper looks like he's keeping an eye out on what you're doing. Lol, kinda spooky, great show. Y'all got together like biscuits and gravy. Love the show.
You guys are awesome! Your creativity and fabrication skills are amazing. I have to watch your videos at least twice to make sure I see all the neat details. Merry Christmas!!!
Could get a hold of the airbag manufacturer tell them what bad you love Houston ask them if they sell one that goes two or 2 1/2 inches higher. It’s really that simple then you won’t need that block.
Hey Kids, the Grumman is looking good. Thanks for the video and THANKS for the autographed Christmas card I got with my super cool CWC shop t-shirt!! I’m sure the autographs will be worth big money on the internet!✌️
I’m glad that you realized about the twist on the rear upper bars before it went too far, I hate to see set backs but it makes you guys real.That curb master is Ballin’
. * * * * Cut up some rubber mud flaps into strips to use between the floor joists and the frame . ump out the grill to give you room for the radiator . Run the exhaust up thru the roof , along an interior side wall . You can insulate it and box it in , also vent thru the floor .
The Grumman is going to be coolio! Love the stance and can't wait to see it completed. Thank you for sharing the video showing all the hard work that goes into the build.
The Grumman van is going to be one of the coolest looking set of wheels on the road. You really have a brain for things, a vision both of you work so good together it’s a real pleasure to watch. Keep up the good work and will keep watching.
The Grumman is looking Great 👍, Cory and Hannah are very attentive and impressive, Thanx for Sharing your thoughts and ideas, Have a Merry Christmas 🎅🎄 Have a Great Day 👍
What you might want to get Cory for Christmas is some coveralls! Hannah, you have way better tings to do with the very little spare time you must have between everything else than trying to get his clothes clean. Dirty work for sure! And do yourselves a favour. I know the HF grinding wheels are cheap, but they don't last. Spend a little more, you will be amazed at the difference . Merry Christmas to you both!
I love the way you two work together the stuff you build get finish run and drive you don't talk about what your are going to do you just do it. I like that. Not like Bad chad he builds car that never get finished. You do need new a bigger building to work out of it. I know how it is to work out of a small shop where 10 things need to be moved to one. Keep up the great work. Marry Christmas and have a Happy New Years
Well homies things are looking awesome so far getting excited to see the end results always awesome to see that little cutie Hannah she’s a hoot your one lucky man Cory to have a wife that’s into your adventures and also a awesome help mate enjoy y’all’s videos
Awesome evening yall another awesome adventure as always !!!! Pray yall have a relaxing merry Christmas and happy new year brother and little sister !!!! Awesome video as always stay warm and safe
I'm just afraid those rear bags are too close together? That van body is wide, there may be some body roll...I'd love to have one for a shop truck though! Good video, you got a lot done!
The look says everything guys. The steering is looking problematic like you may have to drop a size or two on those front rims or trim the wheel studs back or cutting out the wheel wells. Guess we'll see down the road . And Cory the more you make messes the more Hannah sings which she seems very capable of my guess she's in the choir at church. With Christmas fast approaching may you both have a safe and wonderful holiday season. God love ya both ❤
Two things, the rivets expand as in diamiter as they are driven, if you want to cleanly remove them to save the sheet you must drill out the center. -- Your old Namco came with a counterweight that protected the driver from getting crushed when backing up. I may know of a complete Namco in pieces that you might buy the counterweight.
Peice and grease may have some body pannels for your murch truck, love your content,keep up the great work cause in the end its gunna pay off big time for yas,merry xmas from Australia.❤
Every 22 minutes a Grumman Olsen truck left the plant. I built floors, undercoated and worked on final inspection at the Montgomery, Pa plant.
Dang that’s cool !!
Use a Pneumatic chisel to share the heads off of the aluminum rivets sorry a little late on the comments
I would really be tempted to polish the body to match the wheels. Sweet build.
Oh my gosh I said that too itd be a rollong mirror lol
@@Hannahwheatcustoms or just graphics. I thought it was for ya'll at first and was thinking the CWC logo polished on there would be SWEET!!
🎄Merry Christmas Hanna & Cory!🎄
Looks like you got it under control. Thanks for sharing with us.
Merry Christmas guys! Thanks for the Christmas card.. that was hilarious.. 😅🤘🏼🇺🇸
That cardboard man behind the camper looks like he's keeping an eye out on what you're doing. Lol, kinda spooky, great show. Y'all got together like biscuits and gravy. Love the show.
That's the dude that owns the Full Throttle Saloon in Sturgis. They must be fans of the show.
Look up frame webbing like they used on older cars. You can get rubber or canvas to put between frame and body
O nice!!!
Home Depot sells good caster wheels and they got a large assortment of them here in my world in Montana
HaHaha. Cory-Wedge, swedge, Hannah-wedgy? Cory..."Youre a wedgy". And then hannahs look was a classic. Haha. Great episode 😅
😂 hey thanks!!!!
I wish you guys would go the Ratstock tour at Psycho Silo. Would love to meet you guys and the mouse trap
Put the radiator in the rear with electric fans😎
cory rides the short bus we love you two
That van is going to be one awesome mean machine. I am impressed totally with the way it is coming along.
Pickles ,pickles lol
The front wheel would have been better
Merry Christmas you two 🎄🎅🏻🧑🏻🎄
Great job & have a Merry Christmas & Happy New Year
Merry Christmas Cory and Hannah
You’re sure right about getting to see them laid out the first time being the best part of the build. Love the vids y’all.
The Grumman build is going to be sweet. The gifts were very kind & sincere. You are a Blessing.
You guys are awesome! Your creativity and fabrication skills are amazing. I have to watch your videos at least twice to make sure I see all the neat details. Merry Christmas!!!
Wow, thank you! Merry Christmas!!
Killin' IT on the Grumman!
Hanna has a great voice for singing!! 👍
Your making progress one step at a time👍👍
Could get a hold of the airbag manufacturer tell them what bad you love Houston ask them if they sell one that goes two or 2 1/2 inches higher. It’s really that simple then you won’t need that block.
I'm sure you have plenty of truck mud flaps that you can cut strips to go between the body and frame.
I’m digging the van 🤠. Merry Christmas 🎄
Nice work on the truck,you guys are awesome ❤Love Jim J&R mobile service and God Bless y'all and your critters
That looks sweeettt good going that thing is slammed
Merry Christmas and Happy New Year Cory & Hannah,, we have a gas station not far from us that has the bet=st chicken in town
Good progress in this one, I like watching your problem solving on the fly.
Hey Kids, the Grumman is looking good. Thanks for the video and THANKS for the autographed Christmas card I got with my super cool CWC shop t-shirt!! I’m sure the autographs will be worth big money on the internet!✌️
More awesome CWC
I’m glad that you realized about the twist on the rear upper bars before it went too far, I hate to see set backs but it makes you guys real.That curb master is Ballin’
Great job guys and gals and Thanks again for sharing with us 👍 from Alabama 🇺🇸👍
Man I've been wanting to body swap a 64 Nova onto a 4 cyl newer frame. Laughing at Hanna's singing. Cause it's good to hear.
. * * * * Cut up some rubber mud flaps into strips to use between the floor joists and the frame . ump out the grill to give you room for the radiator . Run the exhaust up thru the roof , along an interior side wall . You can insulate it and box it in , also vent thru the floor .
It's going to be very cool
MERRY CHRISTMAS!!!
You two are GREAT!!!
Love your van build!!!❤😊
The Van is lookin AWESOME! Merry Christmas y'all!!!!
Thanks Again for another Great Episode! Always Enjoy Your Videos! Merry Christmas!
The Grumman is going to be coolio! Love the stance and can't wait to see it completed. Thank you for sharing the video showing all the hard work that goes into the build.
The Grumman van is going to be one of the coolest looking set of wheels on the road. You really have a brain for things, a vision both of you work so good together it’s a real pleasure to watch. Keep up the good work and will keep watching.
Super cool video to watch 👍👍😎 . Love you two working together ❤
Now that was a really enjoyable episode. So much to comment about it. Merry Christmas you guys. Buck and Mini and the kitties. 😊 ❤😂
Great rendition of the song Hannah! Merry Christmas! 🎁
Hannah that is truly my favorite song and the way you made it awesome too
Super video guys as usual and have a very good Christmas. Love from the UK
You guys are awesome. Hope you have a happy and a merry Christmas.❤❤❤❤
Van looks great 👍
Ole grummin looks great Merry Christmas
Leave the original body openings. Keep it original. Awesome van, guys.
Hannah and Cory Great video The van looks KILLER KOOL Merry Christmas 🎅🏻🎄🤶🏻
Hope you guys have a Merry Christmas and Happy New Years! Keep up the great work.
Cory. The older trucks used Ash wood between the body and frame. The wood will outlast you
I have a 1960 metro on air with 12 valve and 5 speed!!! Not the prettiest but it was acool build and its fun!!!! Lots of hurdles!!!
The van is going to look great. Can't wait to see it done. Hanna I still want those ammo boxes. Merry Christmas guys and God bless.
The Grumman is looking Great 👍, Cory and Hannah are very attentive and impressive,
Thanx for Sharing your thoughts and ideas,
Have a Merry Christmas 🎅🎄
Have a Great Day 👍
Thanks! Hope you guys have a Merry Christmas and Happy New Year!👍
Looking good, I am glad i found your channel and to find out you almost a local only about 1 hour away
What you might want to get Cory for Christmas is some coveralls! Hannah, you have way better tings to do with the very little spare time you must have between everything else than trying to get his clothes clean. Dirty work for sure! And do yourselves a favour. I know the HF grinding wheels are cheap, but they don't last. Spend a little more, you will be amazed at the difference . Merry Christmas to you both!
Man yall never disappoint with your videos. This is the best channel on youtube
Cory I use small cut squares of semi mud flaps for frame to body insolaters and they are easy on the budget
I wish you Luck with those wheel dollies
There junk lol
Merry Christmas you two and a Happy New Year
I love the way you two work together the stuff you build get finish run and drive you don't talk about what your are going to do you just do it. I like that. Not like Bad chad he builds car that never get finished. You do need new a bigger building to work out of it. I know how it is to work out of a small shop where 10 things need to be moved to one. Keep up the great work. Marry Christmas and have a Happy New Years
Awesome once again. 👍👍👍
Very good show Merry Christmas to you guys
Merry Christmas and Happy New Year to the Wheats Family
Man that van is gonna look awsome. Love the contethat you guys do
100 years from now people will watch these videos. Thanks
Great stuff you all !!! Thank you !!! Please be careful Hannah and especially Cory !! Lol !! God bless you all and Merry CHRISTmas !!!!! Eddy
Hey Hannah, lucky and Blessed do not work together in the lives of Believers. You guys are Awesome!!! I love what you are doing!!!
Really like your build videos✌️
Vans lookn awesome homies.merry Christmas.
Cory,… buy Hannah a M18 Milwaukee leaf blower. WAY faster than brooming all the dirt away. They are SUPER handy.
I think you guys do amazing work and keep it up and good luck and be safe and God bless you guys and merry Christmas and happy new year
Good job and video homies
Merry Christmas to y’all
Well homies things are looking awesome so far getting excited to see the end results always awesome to see that little cutie Hannah she’s a hoot your one lucky man Cory to have a wife that’s into your adventures and also a awesome help mate enjoy y’all’s videos
Thanks for the content and keep up the work 👍
Awesome evening yall another awesome adventure as always !!!! Pray yall have a relaxing merry Christmas and happy new year brother and little sister !!!! Awesome video as always stay warm and safe
When is the CD coming out she as a awesome voice love you all and Merry Christmas. God bless from southern Oregon.❤😊
I would run the exhaust up thru the roof and build a box to separate the pipe from the inside. Smoke rolling out the top would be sweet
Good things happen to good people. In joy life and keep having Fun
You don't know me but I really like watching your videos and hope you all have a Marry Christmas and a happy New Year
I'm just afraid those rear bags are too close together? That van body is wide, there may be some body roll...I'd love to have one for a shop truck though! Good video, you got a lot done!
That's a good point...
Grate job as always God bless Merry Christmas looks like Hannah is on her way to Nashville Ha Ha.
The look says everything guys. The steering is looking problematic like you may have to drop a size or two on those front rims or trim the wheel studs back or cutting out the wheel wells. Guess we'll see down the road . And Cory the more you make messes the more Hannah sings which she seems very capable of my guess she's in the choir at church. With Christmas fast approaching may you both have a safe and wonderful holiday season. God love ya both ❤
Have a very Merry Christmas and a Happy New Years
Two things, the rivets expand as in diamiter as they are driven, if you want to cleanly remove them to save the sheet you must drill out the center. -- Your old Namco came with a counterweight that protected the driver from getting crushed when backing up. I may know of a complete Namco in pieces that you might buy the counterweight.
Lookin great guys
Looking cool 👍
Put hockey bucks between the frame and the body
Look into having some Polly body mounts made or retrofit some premade ones. (Polyurethane) Love your content by the way!
👍
✌ great job great team
Vans looking good
Tucking the lugs looks sick up front!
Hannah sounds like she’s from Arkansas, merry Christmas to you all, and happy new year.
It’s going to be cool guys keep it up
That vans is awesome. That's all I have to say
Peice and grease may have some body pannels for your murch truck, love your content,keep up the great work cause in the end its gunna pay off big time for yas,merry xmas from Australia.❤
Side-pipe stacks behind the doors..straight up with 45° kickers at the top.. that would rock 😄🤘🏼🇺🇸