It's fitting Putting the International engine in the Ford DT444 is basically a power stroke. FYI 6 plus one, the plus 1 is Low gear Love the show, keep it up.
I wish they would've had ytube in the early 80s, I could've had over a million subs , I bought a motor home chassis, like a 1and 1/2 ton , 454 , turbo 400 combo , 19.5 tires , put a 1957 chevy cabover body on it and made a car hauler bed assembly for it . Customized the wheel opening on the front , so they didn't look to big for the tires and it was just beautiful . Redid the interior really nice , the outside was original with priner spots and drove it for a couple years to every swap meet around FtWorth , Texas, didn't even have it for sale, but was offered a large profit several times and finally sold it , because the offer was just to much to turn down , should've built many more , I could've sold them all , but life got in the way , and I got lazy .watching yall is inspiring, but at 62 don't know if I still have it in me
Drop that rad, enlarge the opening for the top of the engine, and drop that cab 8" to 10" !! It'll take up the gap between the cab and fuel tank as well as the back. Cut the headache rack down to match, stretch the deck another 6" and voila !! Sexy welding/pulling truck😊
You to call each other what ever you want. It's your channel. If people don't like it turn your volume off if they don't like it! Keep doing what you do. Love the Channel.
Absolutely brilliant guys, we love watching you working together. Cory obviously enjoys working for you Hannah, must be the pizza!. Take care great looking truck. Love from the UK.
Cory can you flip that front axle to lower the frame some? Also its going to be a lot of work lowering that cab down over that frame but work has never stopped you to get it looking good.
I call my wife Red and she calls me Older. That’s what it’s been for 48 years and it works for us.🤷🏼♂️♥️👍🏼 Love what you guys do and thanks for sharing. 🙏
This going to be an incredible swap. Can’t wait to see this one on the road. I love Hanna’s excitement. Y’all are an awesome couple. Keep the vids coming.
If they hadn't pulled the Hannah Wheats Customs truck out to start with. It might have been the best video that the two of you have made to date. 😅 You two make a great couple, seems you'll do a lot together. Love your videos, I watch every one. 😊
The BT466 is one of the best engines International ever built. I would convert the Snap on Truck to that chassis. Seats, I recently bought a set of Mini cooper seats. I am 6-1 & @ 230 not a little guy. The seats fit in my 1950 Ford F1 that has a 5" deep setback on the fire wall. That cabis about 52" wide at the B pillars. Once I removed the in cab fuel tank I fit fine. Check them out for a build as they are really a gerat seat for long distance, and in that wide cab I'll bet you could use an old Coke cooler for a console.
Love that truck but I would have to get everything off that bed. The front half alone is going to look sweet. I’d just make it a flatbed with the side boxes. Way it sits is too busy. Just my preference. Awesome project however you go with it.
Love y'alls sense of humor and engineering skills. So amazing. Looking forward to meeting you both if y'all ever decide to appear at a show in Tx or maybe next year Pigeon Forge. Until then keep the great videos coming.
You two are an amazing couple & team. Hannah is a perfect forklift operator. Can't wait to see this project when it's complete, I don't think pterodactyl would survive in our time I wouldn't WORRY!!! Anyway take care and see you on the next video...
Cool old Ford, from the looks of the slide out mirror frame on the roof, it may be an old mobile home toter that was turned into a welding rig. Whatever its history, look forward to seeing what you guys do with it. Really enjoy the channel, keep up the great work.😎👌👍🇺🇸🤘🔥🔥🔥🔥🔥🔥
This thing with some of them 46” Michelin military tires would be killer!!! I think they would go good with the lifted, oversized type look it has going for it already?!?! And IMO to add to it even more and really take the “welder rig” theme over the top and finish it off just right y’all could add to it with a sort of a lifted, off-road, Moab, rock crawler kinda vibe. A BAD ASS…. ‘HANNAH WHEAT MOBILE OFF-ROAD WELDING’ 😉 “We can weld where no one else has welded before” ANYWAY IDK JUST A THOUGHT GUYS?!?! Keep up the killer work and I’ll keep watching!!! 👍🏻
Yes I definitely have to agree with you both on how tall it is for sure!!! I think I would at least get the cab down flush with the top of the frame if possible!! And see what all you would have to move to do so!!! The higher it is the more top heavy you will be also!!! I’m also definitely not a Ford guy what so ever but I do have to say that it definitely isn’t looking to bad at all!!! I think that has to be because of how old of a truck it is!!! You definitely can’t get as cool of a truck today like they was made years and years ago!!!! I definitely love the older trucks for sure!!! You no Cory you should see if you can find one of the really old willys trucks with the big old flat fenders or even the bigger trucks with the flat fenders and build a truck out of one of those really cool trucks!!! You showed a couple of them when you and Hanna went to a salvage yard and they had two or three of them!!! Those trucks are definitely very very very awesome for sure!!! I can’t remember the name of them though??? Awesome video you two and I would definitely say that you both got a bunch done in two days for sure!!!!!
Hey Hi again Corey and Hannah from the D Michigan hey the motor city 😅😊 thanks for your time and video on your new project I ❤ appreciate details you add, you make it look easy 😅🎉😊😊
Hey guys i have always called my girlfriend Homie… she still thinks it’s hilarious and all of her friends think it’s funny. It’s usually the “pronoun people” that have a problem with calling each other Homie. I use it as a term of endearment sort of when I refer to my girlfriend as Homie. I wouldn’t pay much mind to those people, y’all do fantastic work and we love seeing your videos. Keep up the good work Homies’. 🤘🤘🤘🤘
Haha don't you be mis gendering the men that think they are a non binary butthole licker woman 😄 😆 🤣 I loved that part just shows that it's really 1 percent of ppl that are transmissions and maybe 15 percent that "pronoun" can't change your chromosomes no matter what you do.
@@stevecomb180 Oh, stop it, that's not that group. If anything, I'd think they'd be fine with calling partners "homie." My theory is, the _person_ ( because Hannah said it was a commenter, not multiple ) was either oldschool and thought it's weird for a married man and woman to call each other something other than "honey, baby, etc," OR maybe they think "homie" sounds too ethnic, and that bothers them.
On the welder truck, can you mount the fenders further out to cover the wheels? I think it could look cool and should work as the headlamps are on the front panel not the fenders.
Hi guys, I like the height of the truck with out lowering any more. You can fill in the gaps with sheet metal or tool boxes. Lowering more will put more engine in the cab. It looks bad ass up higher.
You two were made to spend your lives together. You compliment each other perfectly. Keep being yourselves and each others Homie.
Thank you so much !!
You guys are my favorite HOMIES to watch on TH-cam! Keep up the good videos!
It's fitting Putting the International engine in the Ford DT444 is basically a power stroke. FYI 6 plus one, the plus 1 is Low gear Love the show, keep it up.
lol but does anyone really use low gear I count reverse as the plus I know that ain’t what it is but I like to think that
Corey was sooo happy to hear that Hannah would be happy with 3 inches😂😂😂😂
I think Hannah has been taking dance lessons from Puddin's Fab Shop.
Haha we should have a dance off!
Hannah , you are one of a kind, you are a treasure to Cory. You two are so good to each other. Keep up the videos!
Oh gah-lee well thank you I definitely got blessed with a man that will put up with me haha
Hannah, that’s gonna be a great new ride!
Cory, you better up your game or Hannah Wheat Customs is gonna be looking for a new fabricator! 😂😂😂
I really enjoyed this video. Love the vision you guys have for older trucks and adding modern drivetrains.
This oil rig truck is Kool, looking forward to seeing how it comes put and how much of the original rig you keep
I don't know why, but I really LOVE the fire truck at the beginning of this video.
I wish they would've had ytube in the early 80s, I could've had over a million subs , I bought a motor home chassis, like a 1and 1/2 ton , 454 , turbo 400 combo , 19.5 tires , put a 1957 chevy cabover body on it and made a car hauler bed assembly for it . Customized the wheel opening on the front , so they didn't look to big for the tires and it was just beautiful . Redid the interior really nice , the outside was original with priner spots and drove it for a couple years to every swap meet around FtWorth , Texas, didn't even have it for sale, but was offered a large profit several times and finally sold it , because the offer was just to much to turn down , should've built many more , I could've sold them all , but life got in the way , and I got lazy .watching yall is inspiring, but at 62 don't know if I still have it in me
Dang ! Would love to see that !! Thanks for sharing your story!!
Drop that rad, enlarge the opening for the top of the engine, and drop that cab 8" to 10" !! It'll take up the gap between the cab and fuel tank as well as the back. Cut the headache rack down to match, stretch the deck another 6" and voila !! Sexy welding/pulling truck😊
You to call each other what ever you want. It's your channel. If people don't like it turn your volume off if they don't like it! Keep doing what you do. Love the Channel.
Absolutely brilliant guys, we love watching you working together. Cory obviously enjoys working for you Hannah, must be the pizza!. Take care great looking truck. Love from the UK.
Thanks!!!
You guys were grinding hard, that was a huge undertaking for 2 days.
Looking forward to the upcoming episodes.
Cory can you flip that front axle to lower the frame some? Also its going to be a lot of work lowering that cab down over that frame but work has never stopped you to get it looking good.
I was thinking/planning the same thing
It's so cool to see two people doing what they love to do. keep the videos coming😊
How COOL is that truck! Can't wait till next week you guy's!
Put air bags on the front axle like they do on peterbilt's & kenworth's, that'll drop it down a few more inches
What we are planning to do also
I was hoping you guys were going to get to this truck soon. That thing is so freakin cool. Cant wait to see what you guys do with it!
Gonna be very cool guy's ! Nice little jig Hanna had going on there😊
I am from Hutchinson, Kansas, I know Salas and his father. I live in Wichita, Kansas now. Good luck with that truck
Thank you!!!
I call my wife Red and she calls me Older. That’s what it’s been for 48 years and it works for us.🤷🏼♂️♥️👍🏼 Love what you guys do and thanks for sharing. 🙏
7 spd. I worked on a bunch of those. Great trucks. I would definitely move that radiator down and lower the cab down at least 10 inches.
Always look forward to your videos ever since I found you guys. I always make time to watch your next adventure, Keep up the great work.
Awesome! Thank you!
Price of the truck - $1,500
Price of the body swap ?
Look on Hannah Indiana's face priceless.
Gonna be a schaweet ride
This going to be an incredible swap. Can’t wait to see this one on the road. I love Hanna’s excitement. Y’all are an awesome couple. Keep the vids coming.
Well Both of you do a great job as husband and wife love all your. U tube channel shows. Keep up the great work 😊👍🙏👀
Guys you always do such a great job with your videos and they are just super fun to watch
My grandpa always said not to eat those persimmons unless the frost hit them
Great… well I’m still alive 😅😅😅
You guys are awesome love watching lot's of hard work keep it up and I will keep watching God bless.
Thanks so much!!
It’s amazing how small the cab is once y’all got it off and on the ground.
Hello guys, I still ❤️ your videos and your pups, keep up the great job Love Jim J&R mobile service and God Bless
That old Ford is ultra cool !!!!!
Great Team work and Thanx for Sharing your thoughts 👍
Have a Great Day 👍
I think y'all calling each other homie is hilarious. Keep up the good work
Awesome project ✌️ thanks for the video guys🤙
awesome couple!can't wait ur next vid,avid fan from the Philippines 🇵🇭
You two are adorable. I love the way you two work together. Nothing wrong with being homies
If they hadn't pulled the Hannah Wheats Customs truck out to start with. It might have been the best video that the two of you have made to date. 😅 You two make a great couple, seems you'll do a lot together. Love your videos, I watch every one. 😊
You Guys are off to another adventure...thanks for taking us along
Our pleasure!
The BT466 is one of the best engines International ever built. I would convert the Snap on Truck to that chassis. Seats, I recently bought a set of Mini cooper seats. I am 6-1 & @ 230 not a little guy. The seats fit in my 1950 Ford F1 that has a 5" deep setback on the fire wall. That cabis about 52" wide at the B pillars. Once I removed the in cab fuel tank I fit fine. Check them out for a build as they are really a gerat seat for long distance, and in that wide cab I'll bet you could use an old Coke cooler for a console.
You two are perfect for each other I love how you both pick at each other what a blessing you both are to each other 😊😊
I love watching you guys working together. You look like you have a lot of fun. I love the old Ford, I can’t wait to see it again soon.👍🏻
Excited about the weldin truck! Gonna be awesome when y’all get it rollin!
Love that truck but I would have to get everything off that bed. The front half alone is going to look sweet. I’d just make it a flatbed with the side boxes. Way it sits is too busy. Just my preference. Awesome project however you go with it.
I am impressed that is going to be one bad to the bone truck. Hannah will be jamming the gears soon, areal trucker.
Lovin the build.
Thanks for sharing with us.
You are both cool! Awesome collection you guys are building.
Love y'alls sense of humor and engineering skills. So amazing. Looking forward to meeting you both if y'all ever decide to appear at a show in Tx or maybe next year Pigeon Forge. Until then keep the great videos coming.
Lookin' forward to this build. I worked for International for 10 yrs and I love any thing International. Gonna be a sweet rig for sure!
Don’t ever get rid of your truck Hannah.That Viking of yours is one of the coolest trucks on TH-cam
You two are an amazing couple & team. Hannah is a perfect forklift operator. Can't wait to see this project when it's complete, I don't think pterodactyl would survive in our time I wouldn't WORRY!!! Anyway take care and see you on the next video...
Awesome video you guys are a hoot 😂. Thanks for sharing 👊!
great job, your both very hard workers & l always enjoy your videos
Thank you so much!
Glad i found you guys. Good stuff
That was a great video, and I liked how long it was.
I love N model fords I have one to mine is a 1966 N1000D 220 Cummins 10 speed looking forward to this project
Great job guys, looks like Hannah Wheat Customs is already in a halfway.😀 Looking forward for the next "episode"!👍
People just can't let you be yourself. Don't let people tell you how to be. I love your personalities! It's your show!❤
Awesome adventure as always brother and little sister so much action lol !!!!
Great work!
Its gona be awsome! 😃👍
Cool old Ford, from the looks of the slide out mirror frame on the roof, it may be an old mobile home toter that was turned into a welding rig. Whatever its history, look forward to seeing what you guys do with it.
Really enjoy the channel, keep up the great work.😎👌👍🇺🇸🤘🔥🔥🔥🔥🔥🔥
This thing with some of them 46” Michelin military tires would be killer!!! I think they would go good with the lifted, oversized type look it has going for it already?!?!
And IMO to add to it even more and really take the “welder rig” theme over the top and finish it off just right y’all could add to it with a sort of a lifted, off-road, Moab, rock crawler kinda vibe.
A BAD ASS….
‘HANNAH WHEAT MOBILE OFF-ROAD WELDING’ 😉
“We can weld where no one else has welded before”
ANYWAY IDK JUST A THOUGHT GUYS?!?!
Keep up the killer work and I’ll keep watching!!! 👍🏻
Thats a solid drive train you're using , going to be awesome 👌
Hannah,you need to take the long tubes that you mentioned about sign posts for exhaust stacks.
Yep....this will be an awesome build.....as usual! Can not wait to see what twists Hannah comes up with!!
Yes I definitely have to agree with you both on how tall it is for sure!!! I think I would at least get the cab down flush with the top of the frame if possible!! And see what all you would have to move to do so!!! The higher it is the more top heavy you will be also!!! I’m also definitely not a Ford guy what so ever but I do have to say that it definitely isn’t looking to bad at all!!! I think that has to be because of how old of a truck it is!!! You definitely can’t get as cool of a truck today like they was made years and years ago!!!! I definitely love the older trucks for sure!!! You no Cory you should see if you can find one of the really old willys trucks with the big old flat fenders or even the bigger trucks with the flat fenders and build a truck out of one of those really cool trucks!!! You showed a couple of them when you and Hanna went to a salvage yard and they had two or three of them!!! Those trucks are definitely very very very awesome for sure!!! I can’t remember the name of them though??? Awesome video you two and I would definitely say that you both got a bunch done in two days for sure!!!!!
Great start looking good
Enjoy your projects and vison of revamping old trucks, My wife and i watch together, Talk to your dogs more they feel left out, lol
Throw the flaming accelerator pedal by the propane tank... PERFECT LOL
Hey Hi again Corey and Hannah from the D Michigan hey the motor city 😅😊 thanks for your time and video on your new project I ❤ appreciate details you add, you make it look easy 😅🎉😊😊
My favorite TV show by far, hope to meet you sometime.
Some people build fake rat rod welding rigs, cory and hannah bring back an original. I've been waiting for this truck to get some love.
Well I might have to subscribe so I can follow this project. Very interesting 🤔 Content. Thanks 👍 for sharing.
Hey guys i have always called my girlfriend Homie… she still thinks it’s hilarious and all of her friends think it’s funny. It’s usually the “pronoun people” that have a problem with calling each other Homie. I use it as a term of endearment sort of when I refer to my girlfriend as Homie. I wouldn’t pay much mind to those people, y’all do fantastic work and we love seeing your videos. Keep up the good work Homies’. 🤘🤘🤘🤘
Hey homie! Glad we ain’t the only ones! We appreciate you!
Haha don't you be mis gendering the men that think they are a non binary butthole licker woman 😄 😆 🤣 I loved that part just shows that it's really 1 percent of ppl that are transmissions and maybe 15 percent that "pronoun" can't change your chromosomes no matter what you do.
Who are these "pronoun people" ?
It’s about 1 percent of one percent of the population that wants to be called they them those. They are affiliates of the alphabet people. 😂😂
@@stevecomb180 Oh, stop it, that's not that group. If anything, I'd think they'd be fine with calling partners "homie." My theory is, the _person_ ( because Hannah said it was a commenter, not multiple ) was either oldschool and thought it's weird for a married man and woman to call each other something other than "honey, baby, etc," OR maybe they think "homie" sounds too ethnic, and that bothers them.
Round goggles are for torch work you can get all the replacement parts at any welding supply store.
That ol squarebody looks like my old one. Your build looking good!
i could watch you guys all day , but i have to work on my Rat ROD
On the welder truck, can you mount the fenders further out to cover the wheels? I think it could look cool and should work as the headlamps are on the front panel not the fenders.
You need a dumpster on site just for cleaning out trucks!
Go Hannah!
Can you move the axle on top of the leaf springs to help fill the gaps? Great Progress🏁
I really was hopeing that you could get the cab down alot further. But you guys are awesome. And i like this build even though im not a ford guy.
Next week 🤘🏼 we lowered it 😊
That truck is going to be bad ass!! Love it
Gather all those up, get in the house, and make some persimmon cookies asap.
Guys as always another awesome video really enjoy watching a man thanks y'all there great videos
Awesome thank you!
Looks great so far nice job you guys and girl 😮😎🤪🙏
How about C&H Customs?
I’ve gotta good friend that was from abbyville. He said Robert was a great guy
Your videos are very entertaining. You two are an amazing couple
Of all your projects, I like Hannah's viking best, I was manufactured the same year : )
People need to live their own life and stop thinking they have the right to run other's. You do you, homie.
Very Cool Truck
Yall are doing a great job homies
the bumper and grill on the Welder Truck is priceless
Great video as always looks great can’t wait to see it finished
Great video
Hi guys, I like the height of the truck with out lowering any more. You can fill in the gaps with sheet metal or tool boxes. Lowering more will put more engine in the cab. It looks bad ass up higher.
HWC!! Each video is better than the last. I love this project.
exited about the welding/oil truck have fun ...............
Geezous Cory, you couldn't have a larger disc for that death wheel...lol