Langdon Tactical now has on their website an updated version of the PX4 slide cut with suppressor height sights. Unfortunately incompatible with this version of the RDO slide cut.
Beautiful gun. The red dot looks cool. I have heard that it is a pain to switch out the sights. Did you find this to be true? I want to swap out my sights, but heard that the rear sight is difficult to remove, and there is a good chance of scratching the slide's finish. Also, is that a milled slide?
I only owned the full-size, but I have shot the compact a fair bit, the compact had a little more recoil, but it was negligible, that rotating barrel is pretty effective at mitigating 9mm...it might even just have been the larger real estate available on the full size grip. I will say that the barrel length is shorter than most guns of the same size, and the full-size reminds me of the glock 19x in terms of form and dimensions
Hello! It’s done by Langdon tactical technologies, they offer it as a modification or you can buy the gun like that from them, basically though, they mill the top flat and drill and tap holes to match a Glock MOS plate or any Glock MOS spec’d plate, which is why I could swap the MOS plate for one from c&h precision. You then bolt the optic to that plate. I hope that answers your question
Do you find that the full size Px4 offers more recoil control over the compact or should I go with the compact for edc ? I heard the full size doesn’t have np3 internals while the compact does, is that true ?
So the compact is smooth shooting as well but it’s chunky; as such I don’t thing moving to a full size takes that much away from you concealment wise but offers a bit more comfort when shooting, bigger magazines longer sight radius etc. not sure about which has np3. It does seem like LTT is shrinking his offerings on the px4 as he offers more on hk products
@@morlock8621 Thanks! For some reason I was out of the loop. I just got the email ad from LTT yesterday that they can do this. Definitely sending my slide in. Thanks again and happy shooting.
Your last few comments comparing PX4 to HK triggers is spot on.
Langdon Tactical now has on their website an updated version of the PX4 slide cut with suppressor height sights. Unfortunately incompatible with this version of the RDO slide cut.
Like what you did with this firearm! 👍
Damn this the exact video I have been searching for
Thanks!
Beautiful gun. The red dot looks cool. I have heard that it is a pain to switch out the sights. Did you find this to be true? I want to swap out my sights, but heard that the rear sight is difficult to remove, and there is a good chance of scratching the slide's finish. Also, is that a milled slide?
Yeah, the finish is definitely scratchable, and yes the slide was milled by LTT
Just found your videos and realized you own both the full sized and compact PX4. Which one would you say has less muzzle flip/recoil of the two sizes?
I only owned the full-size, but I have shot the compact a fair bit, the compact had a little more recoil, but it was negligible, that rotating barrel is pretty effective at mitigating 9mm...it might even just have been the larger real estate available on the full size grip. I will say that the barrel length is shorter than most guns of the same size, and the full-size reminds me of the glock 19x in terms of form and dimensions
@@morlock8621 Interesting. How does the recoil compare to the 92 series?
FatefulFerret I would say about the same, very smooth, which is interesting considering the weight different between the two.
Hi Morlock! I have a question with regards to your red dot sight? How does it mount to the PX4?
Hello! It’s done by Langdon tactical technologies, they offer it as a modification or you can buy the gun like that from them, basically though, they mill the top flat and drill and tap holes to match a Glock MOS plate or any Glock MOS spec’d plate, which is why I could swap the MOS plate for one from c&h precision. You then bolt the optic to that plate. I hope that answers your question
@@morlock8621 Thank you
Does the LTT optic cut come with a cover in the case you decide to use it without RDO?
unfortunately no
Do you find that the full size Px4 offers more recoil control over the compact or should I go with the compact for edc ? I heard the full size doesn’t have np3 internals while the compact does, is that true ?
So the compact is smooth shooting as well but it’s chunky; as such I don’t thing moving to a full size takes that much away from you concealment wise but offers a bit more comfort when shooting, bigger magazines longer sight radius etc. not sure about which has np3. It does seem like LTT is shrinking his offerings on the px4 as he offers more on hk products
When you sent it off to LTT, did they install a new decocker on it? And if so, what decocker did they put in it?
The stealth lever, I think it would have been better with the 92 series style decocker
Did I miss how you / who did the optic mount? Did you have to mill the slide?
Devil Dog Langdon Tactical Technologies (LTT) offers the gun optic ready from them or will mill your slide
@@morlock8621 Thanks! For some reason I was out of the loop. I just got the email ad from LTT yesterday that they can do this. Definitely sending my slide in. Thanks again and happy shooting.
😎
They only update for 9mm and not the .40 correct?
I know they don’t do the 45 acp special duty version so prob not
Wow fantastic gun, I really like it. Can I buy this gun? Bro plz plz plz
What mounting plate did you have on you slide
Originally the Glock mos place but I replaced it with a chwps
bro please leave a link to purchase the optics
C&h precision has good prices
hola buenas tardes donde compraste el rail superior donde va el punto rojo
srjosemon el optic? De Amazon o optics planet
Now they discontinued
Video good . Audio low volume,
💔💔💔💔💔💔💔💔💔💔💔💔
💔