One of the most under rated handguns on the market. It boasts the highest round count without failure according the Earnest Langdon. The locking rotating bolt is extremely robust. Apparently more so than many standard actions. Congratulations on your ownership. Nice video.
Right now I run a Box stock full sized PX4. It has the factory stainless steel guide rod, and factory adjustable rear sight. The only "mods" I will do is milling the slide for a red dot and getting a set of suppressor height backup irons. I am the odd duck that likes the factory trigger as is. Of all the choices on the market, the PX4 is my favorite.
I agree, I think the only gun that can take it on in its class is the hk p30, but they are $200 more expensive, mags cost at least twice as much and their triggers suck in comparison
Hidden hybrid holsters. Tell em what kind of attachments you have and they custom make em. Also has adjustable retention and a claw to cant the handle towards your body for 0-minimal print
Haha points for attention to detail! I am surprised no one has caught it or commented on it. Fyi, it was a foam earplug stuffed into a casing with just a primer, probably questionable safety practice but there was no live ammunition in the gun or room and the plug casing was fed directly into the chamber, obviously the pressure isnt high enough, nor projectile hard enough to be more a hazard than a nerf gun but the wife wasn’t too happy that I was “shooting guns in the house!”
@@morlock8621 Heh, I was just scrolling through to see if this was addressed. I figured it was a primer only load as you barely see the slide move (maybe a few mm). But I wondered what projectile you used.
Someone may have already said it in the comments, but LTT is no longer offering the RDO solution with Glock MOS plates; their new solution includes adapter plates with built-in suppressor height sights.
Has anything been modified other than the slide itself, because LTT stated that it modified the firing pin and some other parts in order to make the 92FS optic readymounting as low as possible. Has this been made for the PX4, or only the slide itself has been modified ?
Hey where did you send your receiver to get it optic cut? I have the full size PX4 Storm 45 cal and would really like to put a red dot on it. Any info I will really appreciate it.
Was this the newer mounting solution that copies the 92 mount or the one prior that put the optic higher up. Looks like the older one based on the irons being so low?
Ok I have a holosun 507c that I’m going to by a c an h plate for. Plan on drilling out like you do. Did you just match the firing pin holes from the MOS plate it came with?
Thank you for the info. Is that a holosun 507c you have on it? I noticed the RMR at the beginning of the video. It looks like the holosun is a little lower than the trijicon and looks good
One of the most under rated handguns on the market. It boasts the highest round count without failure according the Earnest Langdon. The locking rotating bolt is extremely robust. Apparently more so than many standard actions. Congratulations on your ownership. Nice video.
CutTheKnot thanks, I definitely miss it
I would LOVE one of these except I would never actually carry it because it is HUGE! I still want one though 🙂
Informative video regarding the red dot and whether to apply to my 92Inox. Yeah baby!
Havoc holsters in Nampa Idaho make Supreme custom holsters that can be customized for any mounting platform. Love mine!
Right now I run a Box stock full sized PX4. It has the factory stainless steel guide rod, and factory adjustable rear sight. The only "mods" I will do is milling the slide for a red dot and getting a set of suppressor height backup irons. I am the odd duck that likes the factory trigger as is. Of all the choices on the market, the PX4 is my favorite.
I agree, I think the only gun that can take it on in its class is the hk p30, but they are $200 more expensive, mags cost at least twice as much and their triggers suck in comparison
love my compact carry, I'm currently debating on a full size ltt px4 or 92 for competition .
Jm custom kydex makes a lot of holsters for the px4.
Loved the burpee! 😂👍
Where did you get the holster with laser/light?
Looking good.
Hidden hybrid holsters. Tell em what kind of attachments you have and they custom make em. Also has adjustable retention and a claw to cant the handle towards your body for 0-minimal print
am i the only one thats confused about the fact that he just shot a gun at a bottle in the living room. How did the bullet not go through the wall.
Haha points for attention to detail! I am surprised no one has caught it or commented on it. Fyi, it was a foam earplug stuffed into a casing with just a primer, probably questionable safety practice but there was no live ammunition in the gun or room and the plug casing was fed directly into the chamber, obviously the pressure isnt high enough, nor projectile hard enough to be more a hazard than a nerf gun but the wife wasn’t too happy that I was “shooting guns in the house!”
@@morlock8621 Heh, I was just scrolling through to see if this was addressed. I figured it was a primer only load as you barely see the slide move (maybe a few mm). But I wondered what projectile you used.
newportl I used a foam 3m ear plug…with what primers are going for these days, I won’t be doing it too often lol
I was shocked as well lol
I was trying to figure that out and why it was so... "sparky" at the indoor range.
Did you just fire a live round indoors? Special ammo or ???
Someone may have already said it in the comments, but LTT is no longer offering the RDO solution with Glock MOS plates; their new solution includes adapter plates with built-in suppressor height sights.
Sold my full size awhile back, regretted it almost instantly. What hammer spring weight were you running on her?
Howdy! Did you send the upper slide itself to LTT to install that optics? Thanks!
What kind of ammo are you using. Looks like fireworks
For indoor steel matches they require frangible ammo, the freedom munitions stuff sparks like crazy
What was the name of the first holster maker you mentioned? Audio is not clear. Thank you
Neoteric arms and JM custom were both mentioned
Has anything been modified other than the slide itself, because LTT stated that it modified the firing pin and some other parts in order to make the 92FS optic readymounting as low as possible. Has this been made for the PX4, or only the slide itself has been modified ?
No idea, if anything, the firing pin block, but they did have to modify the Glock plate to accommodate it as well
Hi could You Tello me how to mount a red dot in a PX4 Storm with de best modelo or type of red dot thks from México
Langdon tactical did mine, not sure if they will work outside the US due to ITAR, holosun red dots are really good
Hey where did you send your receiver to get it optic cut? I have the full size PX4 Storm 45 cal and would really like to put a red dot on it. Any info I will really appreciate it.
Langdon tactical technologies…I’m not sure if they do 45s
You cannot get a .45 Px4 milled by Langdon. They only do 9mm and .40 for the fullsize or compact.
What was the holster you went with? Couldn’t hear it.
Neoteric arms and jmcustom kydex
If you don't mind me asking-what part of the country are you in, it's very pretty there...
Northern Va, and eastern pan handle of WV. And it really is…
@@morlock8621 Thanks for responding, I appreciate it😊👍🏾I'm just down the road a bit from you in East TN...
Is PX4 LTT de-cock only?
Yep! And they make a 92 style decocker for it
Was this the newer mounting solution that copies the 92 mount or the one prior that put the optic higher up. Looks like the older one based on the irons being so low?
This is the gen 1 optic solution, not the latest one
Did you just buy the c and h Rmr and drill out yourself?
Yeah
Ok I have a holosun 507c that I’m going to by a c an h plate for. Plan on drilling out like you do. Did you just match the firing pin holes from the MOS plate it came with?
Ray Silveria yep, just match it up, drill slow and make sure it’s the right side up
Thank you for the info. Is that a holosun 507c you have on it? I noticed the RMR at the beginning of the video. It looks like the holosun is a little lower than the trijicon and looks good
Ray Silveria yep I’ve had both on there, but tbh, I prefer the holosun
get a shadow 2 trust me its worth it
lol I am one of the 2% that doesn’t like cz ergos
Only sexy guns are interesting.
Carry? 😂😂😂