What kind of hinges did you use for your stairs? I am looking to build something similar that attaches to a cabinet and then folds out in a similar way that yours did. Great job by the way
@@mickymirchandani6058 Hi. Thank for watching and comments. I would suggest following: 1) Decide the vertical ‘Y’ axis height of ladder. 2) decide the Horizontal’X’ axis space available for ladder. 3) this will decide angle of ladder. 4) once you get these 3 dimension. 5) decide width of stair step 6) put that width on X axis. It will give you number on steps you can make. If you have no space angle issue. Then start from step 6 and use Y axis for height. This will give you total height and angle for ladder. Not sure this helps. You can stop my video at preparation section. I missed it because I was not decided to make video while start making it. If you don’t understand, I will help you to please write back.
@@deowrat thanks for explaining the 1st step. I am trying to understand how to make the pattern for cutting of the 2 sides I have a Y axis of 11' and a X axis of 12' so I have 12 steps, each is 1' wide. What is the next step?
If the floor height is 4 m, what is the size of the staircase ? Do you have any idea for folding staicase and can be pull up and lock on upper floor so no one can reach it ?
Hi. I have missed the explanation in the video. It was randomly shoot. I will make another video to explain because received many requests. If 4m height, decide size of foot step width. Bigger the width, longer would be ladder. So keep minimum to save space and adjust to proper slope. For me it was 2m and as I put in the closet, I had limited space to kept 10mm of foot step width. And then adjusted how many steps can be fitted. It won’t be folded on upper floor but on the wall and is very convenient. You can put curtain or any innovative idea to hide it.
@@deowrat I have the unit that only around 430 cm (if not mistaken. should re-measure). I want to split it into 2 place so the top one (around 30 cm) can be used to save some stuff. The ladder size only for 1 people but need to hold around 200 kgs. Any advice ? Thanks
@@deowrat How thick the aluminium or iron to hold 200 kgs ? My plan is to make a ladder that can be lift up and lock at the upper . Any advice or scheme for that ?
Nice, you could have given dimensions of ladder you made along with height and angle you chose. The loud music background was idiotic and should have been avoided. Your favorite song, need not be favorite for rest of the world. Please avoid loud music.
Thank you for the feedback. I have loaded it without thinking that it would be helpful. I am thinking to create another video explaining properly. I will post my plan. Thank you again.
![[woodworking] Folding staircase for loft room](http://i.ytimg.com/vi/msQBw_ePoYc/mqdefault.jpg)
Wow 👌 u have inspired me to do this on my own
Let me know if you want details. I couldn’t capture everything in video. Because it was not on purpose. But I can guide what I did.
@@deowrat thanks i'll definitely ask you :)
You did a great job, I love it. Do you understand the melodious Indian song playing in the background? Being an Indian I love it.
Your coloring is very nice thing. May you make a video for this ...
Thank you for watching and comments. Sure I can make it.
Thank you for watching and comments. I will surely try to make it.
What kind of hinges did you use for your stairs? I am looking to build something similar that attaches to a cabinet and then folds out in a similar way that yours did. Great job by the way
Hinges used for doors. But I bolted it to give strength and not screw.
この動画、おりたたみ階段は日本で制作されてますよね？
この制作方法を教えてほしいです。
よろしくお願いします。
日本で1番使いやすいかなと思います。日本語でも説明したいと思います。よろしくお願いします。
ありがとうございます！
このおりたたみ階段の各寸法と長さはどのくらいですか？
あと階段の角度は何度でしょうか？
よろしくお願いします。
good work!
I love it! can you give me all the details please? thank you!
Lucila Nieles sure. Let me know size and angle of what you want to make. I can share my knowledge.
Ё
How do I calculate the cuts for a 12’ high 3’ wide ladder?
@@mickymirchandani6058 Hi. Thank for watching and comments.
I would suggest following:
1) Decide the vertical ‘Y’ axis height of ladder.
2) decide the Horizontal’X’ axis space available for ladder.
3) this will decide angle of ladder.
4) once you get these 3 dimension. 5) decide width of stair step
6) put that width on X axis. It will give you number on steps you can make.
If you have no space angle issue. Then start from step 6 and use Y axis for height. This will give you total height and angle for ladder.
Not sure this helps. You can stop my video at preparation section. I missed it because I was not decided to make video while start making it.
If you don’t understand, I will help you to please write back.
@@deowrat thanks for explaining the 1st step. I am trying to understand how to make the pattern for cutting of the 2 sides I have a Y axis of 11' and a X axis of 12' so I have 12 steps, each is 1' wide. What is the next step?
awesome
Good job.
Where are you ?
Thanks. Hiroshima Japan.
If the floor height is 4 m, what is the size of the staircase ? Do you have any idea for folding staicase and can be pull up and lock on upper floor so no one can reach it ?
How much weight can be handled ? What tools needed ?
Hi. I have missed the explanation in the video. It was randomly shoot. I will make another video to explain because received many requests.
If 4m height, decide size of foot step width. Bigger the width, longer would be ladder. So keep minimum to save space and adjust to proper slope. For me it was 2m and as I put in the closet, I had limited space to kept 10mm of foot step width. And then adjusted how many steps can be fitted.
It won’t be folded on upper floor but on the wall and is very convenient. You can put curtain or any innovative idea to hide it.
@@deowrat I have the unit that only around 430 cm (if not mistaken. should re-measure). I want to split it into 2 place so the top one (around 30 cm) can be used to save some stuff. The ladder size only for 1 people but need to hold around 200 kgs. Any advice ? Thanks
@@magicthinker5647 To hold 200kg may be good idea to make one out of aluminium or iron.
@@deowrat How thick the aluminium or iron to hold 200 kgs ? My plan is to make a ladder that can be lift up and lock at the upper . Any advice or scheme for that ?
Hello where we can order from and price pls?
Hi. I have made it by myself. I missed shooting while cutting those.
Where did you purchase the kit?
I have design it to my dimensions and cut it at the home centre, where I bought the material.
I need the plans for these ladders please
Nice, you could have given dimensions of ladder you made along with height and angle you chose. The loud music background was idiotic and should have been avoided. Your favorite song, need not be favorite for rest of the world. Please avoid loud music.
Thank you for the feedback. I have loaded it without thinking that it would be helpful. I am thinking to create another video explaining properly. I will post my plan. Thank you again.
@@deowrat Thanks for your positive response. Happy Sankranti greetings to you and your family