Giving a periodic reverse turn while tapping can break the loose material and can help prevent too much binding up, lessening the chances of breaking the tap. We usually do a 1/2 to full rotation and break back a slight bit, rotate, break back, etc. love your stuff, Uri
When you tap enough holes like a full time machinist you'll get the spidey sense for when your tap is loaded up and in need of being cleaned out. Otherwise I rarely back the tap off to break the chip. Seems unnecessary when the tap only breaks when the flutes are bound right up
@@chazmakarowski5429 yes, every time I've broken a tap, it was immediately preceded by the thought "gee I wonder why this has gotten so hard to turn?" Now I just need to learn to act on that thought appropriately.
@@Nono-hk3is besides having no real feel with small taps, tapping exotics or hardened materials, and having to use dull taps since buying them cost money and what I said still stands. Haven't broken a tap since... 2014? maybe 2015. Next time you break a tap though, throw the piece my way and i'll dig it out of the hole for ya ;)
This was the topic of another video's commentary recently and 2 things bear repeating as relates to NOT breaking the tap: first, use taps that are designed for machine tapping (versus hand tapping) and second, if possible, before moving the work piece, chuck the tap in the same chuck you used to drill the hole so it can be sent in perfectly. These taps might be a bit more costly, but I plan to give it a whirl.
Uri, I bet you would be a world champion etch-a-sketch artist with those lathe skills! Nice work as always. Nice to see a new project from you. Take care ✌️
This spoon needs to be a precursor to one of those beautifully creative videos like preserving lemons. Maybe it can be part of a series where you make several utensils to “cook” a kirsch holz tort or some silly play on words like that. I so look forward to the quirky side of your videos. Gruss Gott!!
I love this channel because the titles are always so vague when you see the thumbnail, but by then end, you're like "Oh, he's making a tap handle and spoon." But during the whole video I am enthralled.
So much advice below in the comments. I just can't help myself, here is my advice..... "Make more videos just like this, I love your sense of humor and I get that the mistakes aren't always mistakes!"
"They are fine" , I got those taps, the are about as well made as a 3am drunk breakfast. Buy a set of proper taps, or second hand ones ( I get joblots off ebay) and its a WORLD of difference.
Just fantastic.... I absolutely adore the work you do. Some of it may not be in line with what a professional fitter-turner or machinist would do but you're learning each time about working this kind of media as an artist. The fantastically styled decorative creations you make with your hands are priceless in my eyes.
Buy HSS taps instead of carbon steel. Also when you tap a thread use oil and back off a quarter turn for every full rotation and you'll never break one ever again. 😉
@@manudehanoi Yes. They tend to be in sets or at the budget end of the scale. I don't like them but they are ok for the occasional user working in brass or aluminium.
When I saw you stop rotating the chuck manually and moved away your hand in the intro I thought to myself "he's not going to do *that,* is he?" But you were and the result was exactly as expected. Very This Old Tony-esque moment.
I think he switched the tap out for a center drill, that's why he did the little hand wave thing in front of it. You can see the tip is much smaller in diameter than the end of the tap was. He dun tricked us.
really enjoy your videos you're a really dedicated hand crafting mad genius i doubt many others on youtube would be prepared to hacksaw, file, scrape, chisel and grind metal by hand like you do keep up the good work Uri
Honestly I don't think it matters too much what you make, as anything you make is worth watching. Incredible skill and precision, very enjoyable to see you work. Thanks!
You can't help but love this channel the most random bizarre things you ever want to see made alway's happen to be available on this channel. Bloody Brilliant 👏 👌 👍. Uri if you had the chance of having one new tool/item for your workshop what would it be and how much would it cost 🤔?. As always buddy 💯 % 👍 🇬🇧.
im mostly a wood worker but i keep watching because you are a bit scattered but you seem ok with it, like your enjoying your life. i think its part of having a creative mind. i can make great art but i spend a lot of time feeling scattered like you. what im trying to say is that you know how to be yourself and that is the shiny brass key that will unlock the tap and die to happiness :-)
I understand you feel the need for something, and you do that as spoon as possible, and... oh yes, these nail files are really amazing for finishing! 👌
As always an awesome video. So many of your projects give the appearance of being made in 18th century Europe. I love every single one. Keep it up and thank you for the inspiration.
Uri, as always I enjoy your videos. Each is a chance to get away from the world a few minutes and give my sanity a bit if a respite. Equally charming are the items you make as well as your personality and your joyful eccentricities make it even more of a pleasure to watch. Keep up the good work
Watching this channel for the first time. I tried turning on the Closed Captions... and TH-cam's auto captions interpreted the sounds of the tools as "[Music]". How true, YT. How true. Also, that work looks good. Thanks for showing it.
Hey Uri - next time you decide to make a spoon - consider the lathe! Us wood-turners make them all the time, and your technique with the tool-post is really not all that dissimilar from when we use a scraper. Would definitely speed up your bulk material removal, and you wouldn't even need to worry about grain direction :) Great work. Maybe you should look at making a tap-follower for your tapping efforts ;)
I concur with others about using some oil and giving the tap a 1/4 turn back. Love watching you work - especially the process and commentary that goes along with the job. Greetings from Kansas, USA
Awesome! I cant get over how great the bolts finish are. But be aware that brass and also that "Free machining steel" are both very likely to have lead in them. Here in the states they often have an L in the name, for instance 12L14
The steel you ordered (automatstål in swedish) is easy to work with. Cuts like a charm and easy to bend as well. Those bolts you're machining are hardened so your machining experience will be a lot more pleasant! Keep up the good work!
The video was fine, perhaps giving a shout out to the patreon members in the outro would encourage more folks to interact. Like end credits or something. It's just a thought, always love watching the whimsical things you make. world needs a little more of that.
Oh my god, those slow pushes in with increasingly tense music while tapping some threads... only for it all to be fine with no taps broken. Uri. Uri, please. 😂
Perhaps a suggestion? Secure traveling sandwich holder. That suitcase didn't work out so well last time... but the video was, as the kids say, AWESOME!!!
Damn you made it sexier than I ever saw it! Made in USA with a Japanese beam, traveling to UK then France to end up in your shop! That's quite an adventure for a lathe 🤣! You really do gorgeous things on it!
The tapping scenes 🤣That subtle scratchy terror violin sound in the background while zooming in ever so slightly. Absolutely awesome! I can't wait to see how many people are flipping out about not giving it the ol' half turn back. Hey about the spoon not being good at spooning, well, I can relate :D Awesome work on the tap, that is just gorgeous!
I see your clever camera tricks at the start! Good video, you successfully border the edge of whacky. Each episode is crafted better than the thing your making 😂😂
All cheap Tap holders suck Uri, well done on inventing a good one. I am amazed how well your lathe and tooling cuts mild steel, not many people would like to hold the tool while turning steel........or they are just plain mad, that probably helps!!
Nice! Agreed, brass tends to look iffy until you get it up to a high polish. Always a pleasure to see one of your uploads! Be very careful with types of free machining steel if these are going to be used in any kind of eating or drinking implements because some types are leaded. The inclusion of lead creates small nodules throughout the steel and provides an easier break for chips, which is why they're good for machining. A couple of other alloys (e.g. those with added sulfur or manganese) have a similar effect without the problems of lead. SAE grades that include an L (12L13 or 12L14 are pretty common) are leaded. Couldn't find specs for automatenstahl like 9SMnPb28 on Matweb but those seem to just list out particular alloying elements and point percentages, so that example would be leaded at .28%.
Excelente tutorial Uri , mucha imaginación hay que tener , para sacar de dos tornillos , esas dos preciosas obras de arte , trabajas las piezas en el torno como los de madera , jajaja , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓
I have one of those cheap tap/die sets. I love cheap tools but avoid using it because the taps are so low quality. I would strongly recommend getting a few taps of HSS from a really good manufacturer, they are far stronger, sharper and cut with less force and will last 20 times longer. If you have never used a really good quality tap then treat yourself, spend $10 on a single M3 tap from someone like Dormer and be amazed by how much better they are. Great video, lovely organic shapes hand turning metal, well done.
Very little liquid - but it is pretty :-) nice job on the tiny tap handle. I have the most baby Starrett for things like that (and the bigger ones) and I use all of them on the regular for various sized jobs.
![Why Did They Stop Making These? [Restoration]](http://i.ytimg.com/vi/gh0SV8aPnMU/mqdefault.jpg)
Everybody is making knives...that guy, made a SPOON! Dare to be different bro!
And you KNOW this guy forks.
Yeah, this guy forks...
@@Aedalas Fork yeah.
@@LaserGadgets Yeah, I'm looking around and this is definitely the guy all the forking
I see you've played knifey spooney before!
@@curbotize Spooning with an errection? Yes.
Giving a periodic reverse turn while tapping can break the loose material and can help prevent too much binding up, lessening the chances of breaking the tap. We usually do a 1/2 to full rotation and break back a slight bit, rotate, break back, etc. love your stuff, Uri
When you tap enough holes like a full time machinist you'll get the spidey sense for when your tap is loaded up and in need of being cleaned out. Otherwise I rarely back the tap off to break the chip. Seems unnecessary when the tap only breaks when the flutes are bound right up
100%
@@chazmakarowski5429 yes, every time I've broken a tap, it was immediately preceded by the thought "gee I wonder why this has gotten so hard to turn?" Now I just need to learn to act on that thought appropriately.
@@Nono-hk3is besides having no real feel with small taps, tapping exotics or hardened materials, and having to use dull taps since buying them cost money and what I said still stands. Haven't broken a tap since... 2014? maybe 2015.
Next time you break a tap though, throw the piece my way and i'll dig it out of the hole for ya ;)
This was the topic of another video's commentary recently and 2 things bear repeating as relates to NOT breaking the tap: first, use taps that are designed for machine tapping (versus hand tapping) and second, if possible, before moving the work piece, chuck the tap in the same chuck you used to drill the hole so it can be sent in perfectly. These taps might be a bit more costly, but I plan to give it a whirl.
Uri, I bet you would be a world champion etch-a-sketch artist with those lathe skills!
Nice work as always. Nice to see a new project from you. Take care ✌️
Using cheap tools to make your own, better tools is a very satisfying feeling.
Your humanity, personality, and relatability are as fun to watch as your awesome and inspiring craftsmanship.
This spoon needs to be a precursor to one of those beautifully creative videos like preserving lemons. Maybe it can be part of a series where you make several utensils to “cook” a kirsch holz tort or some silly play on words like that. I so look forward to the quirky side of your videos. Gruss Gott!!
I love this channel because the titles are always so vague when you see the thumbnail, but by then end, you're like "Oh, he's making a tap handle and spoon." But during the whole video I am enthralled.
I like this Channel so much.
With Uri, its not just the end result, it's how you're able to enjoy the ride to get there.
“But why?” is almost a requirement with a Uri Tuchman vid. Love ‘em, man.
So much advice below in the comments. I just can't help myself, here is my advice..... "Make more videos just like this, I love your sense of humor and I get that the mistakes aren't always mistakes!"
Your videos really are the perfect mixes of craziness, amazing skills and English fumbling. It's just awesome!
The world needs more manual metalworking. Brava!
The reason I like your channel is you are equal parts artist, maker and mad man! Keep it up!
"They are fine" , I got those taps, the are about as well made as a 3am drunk breakfast. Buy a set of proper taps, or second hand ones ( I get joblots off ebay) and its a WORLD of difference.
I agree with this one million percent!
… or make a set ;)
Just fantastic.... I absolutely adore the work you do. Some of it may not be in line with what a professional fitter-turner or machinist would do but you're learning each time about working this kind of media as an artist. The fantastically styled decorative creations you make with your hands are priceless in my eyes.
Buy HSS taps instead of carbon steel.
Also when you tap a thread use oil and back off a quarter turn for every full rotation and you'll never break one ever again. 😉
Gotta break that chip.👍
do carbon steel taps even exist nowadays?
@@manudehanoi Yes. They tend to be in sets or at the budget end of the scale. I don't like them but they are ok for the occasional user working in brass or aluminium.
@@machinist_matt I get my chinese HSS taps for 1 or 2 usd
My husband and I love watching you create! You make some of the most incredible things! All the love from West Virginia, USA!
Yeyyy, West Virginia! Used to live in Nitro, loved it!
@@yorkshirejoinery2869 Small world! 😊❤
no need for another take, Real Uri is best Uri
When I saw you stop rotating the chuck manually and moved away your hand in the intro I thought to myself "he's not going to do *that,* is he?" But you were and the result was exactly as expected. Very This Old Tony-esque moment.
I think he switched the tap out for a center drill, that's why he did the little hand wave thing in front of it. You can see the tip is much smaller in diameter than the end of the tap was. He dun tricked us.
@@ericg7044 shh
I hope you never change your ways. That’s what I love most about your channel.
Please be careful Uri!!! I saw that cut on your finger!
Amazing job! Watching you is always a fascinating experience!!!
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Hands covered in dirt and cuts, and no idea why you just made something. A true artist and well respected aficionado of the maker movement.
Sorry man, I have no eye for style or art. I just love your personality while making these. You're such a gem of a human.
really enjoy your videos you're a really dedicated hand crafting mad genius i doubt many others on youtube would be prepared to hacksaw, file, scrape, chisel and grind metal by hand like you do keep up the good work Uri
Outstanding job, I love your rants. Lol makes me smile. Thank you for another fine video
It looks like the perfect spoon to add water to water colors. And such an elegant tap holder! Another wonderful visit to Uri's workshop.
What is better than a thing of beauty ? TWO things of beauty ! Wonderful work, thank you.
Nice work my friend
Nice to see machinist video on Monday besides mr Rucker
He's great don't get that wrong
Honestly I don't think it matters too much what you make, as anything you make is worth watching. Incredible skill and precision, very enjoyable to see you work. Thanks!
Just another brilliant and creative renaissance man…
You can't help but love this channel the most random bizarre things you ever want to see made alway's happen to be available on this channel. Bloody Brilliant 👏 👌 👍.
Uri if you had the chance of having one new tool/item for your workshop what would it be and how much would it cost 🤔?.
As always buddy 💯 % 👍 🇬🇧.
Hello. I watch you from Russia. I like your content very much. I don’t know the language, but everything is exactly interesting. Thank you.
The maddest, craziest, most watchable channel on TH-cam. Thank you for being you and all you do. 🥴👏👏👍😀
im mostly a wood worker but i keep watching because you are a bit scattered but you seem ok with it, like your enjoying your life. i think its part of having a creative mind. i can make great art but i spend a lot of time feeling scattered like you. what im trying to say is that you know how to be yourself and that is the shiny brass key that will unlock the tap and die to happiness :-)
I understand you feel the need for something, and you do that as spoon as possible, and... oh yes, these nail files are really amazing for finishing! 👌
As always an awesome video. So many of your projects give the appearance of being made in 18th century Europe. I love every single one. Keep it up and thank you for the inspiration.
Uri, as always I enjoy your videos. Each is a chance to get away from the world a few minutes and give my sanity a bit if a respite. Equally charming are the items you make as well as your personality and your joyful eccentricities make it even more of a pleasure to watch. Keep up the good work
Watching this channel for the first time. I tried turning on the Closed Captions... and TH-cam's auto captions interpreted the sounds of the tools as "[Music]". How true, YT. How true.
Also, that work looks good. Thanks for showing it.
It's actually sad...I mean the state of music these days.... it's categorised as machine background noise from the algoritham
Hey Uri - next time you decide to make a spoon - consider the lathe! Us wood-turners make them all the time, and your technique with the tool-post is really not all that dissimilar from when we use a scraper. Would definitely speed up your bulk material removal, and you wouldn't even need to worry about grain direction :)
Great work. Maybe you should look at making a tap-follower for your tapping efforts ;)
I concur with others about using some oil and giving the tap a 1/4 turn back. Love watching you work - especially the process and commentary that goes along with the job. Greetings from Kansas, USA
These are my favorite videos. The random the better lol. You sir are a trip and so much fun and entertaining to watch.
Awesome! I cant get over how great the bolts finish are. But be aware that brass and also that "Free machining steel" are both very likely to have lead in them. Here in the states they often have an L in the name, for instance 12L14
Nah, it’s fine….
Lead makes everything taste sweeter-just ask the ancient Roman Empire!!
😆😈
The steel you ordered (automatstål in swedish) is easy to work with. Cuts like a charm and easy to bend as well. Those bolts you're machining are hardened so your machining experience will be a lot more pleasant! Keep up the good work!
Looks great uri
That beautiful spoon would make a great gift for parents with a newborn.
The video was fine, perhaps giving a shout out to the patreon members in the outro would encourage more folks to interact. Like end credits or something. It's just a thought, always love watching the whimsical things you make. world needs a little more of that.
Great Work & Video, My Friend👍
It's good to see you back. I love to watch you work, your an artist. Yet another great and inspiring video, thanks!
That spoon would hold just about the right amount of cutting fluid to put on a tap before using it.
Watching you from over here in Japan... love ya Uri ~ keep up the great content! You are always a true fresh breath in these crazy times!
Brilliant craftsmanship. You are a genius and a gentleman. Best wishes from India 🇮🇳.
hello Uri, I have enjoyed your videos for a few years and always look forward to them. One day museums will be exibiting your work!
Oh my god, those slow pushes in with increasingly tense music while tapping some threads... only for it all to be fine with no taps broken. Uri. Uri, please. 😂
Perhaps a suggestion?
Secure traveling sandwich holder.
That suitcase didn't work out so well last time... but the video was, as the kids say, AWESOME!!!
" I don't know why I made this " This is the whole reason why I love you man, I would give you a big hug if I could
Your an amazing artist/craftsman, thank you for sharing your work!
The perfect utensil for stirring your tea sir! Most enjoyable.
Damn you made it sexier than I ever saw it! Made in USA with a Japanese beam, traveling to UK then France to end up in your shop! That's quite an adventure for a lathe 🤣!
You really do gorgeous things on it!
I don't know anyone who can spend their time so beautifully. I love your videos .. 😻🖐
I like the new tap holder!
This is beautifully done! Thank you for sharing this! I love when you crack up at yourself, it gives me life hahah
I love this crazy Jew. Love this channel. Very unique and I agree that it is charming. Thanks Uri.
Another great project Uri and I hope you are doing well and feeling healthy in this crazy world.
Love spoons! And tap holders that is... Great work!
The tapping scenes 🤣That subtle scratchy terror violin sound in the background while zooming in ever so slightly. Absolutely awesome! I can't wait to see how many people are flipping out about not giving it the ol' half turn back. Hey about the spoon not being good at spooning, well, I can relate :D Awesome work on the tap, that is just gorgeous!
Equal parts whimsy and charm. Well done. :)
Love seeing you pop up on my feed, your creations are amazing! Any "flaw" just makes it that much more genuine.
I absolutely love your videos! It is all about your personality, that makes anything you make worth watching, love you Brother!
Uri, looks like you may have upgraded some of your tooling. that lathe collet is super nice! Thanks for sharing!
Glad you brought out the carbide for that shcs, those things are pretty rough to machine, amazing work as always
Jolly good work
I love to watch this humble an kind man making awesome stuff.
Thanks for another great video! This made my day. As always, looking forward to the next. Cheers from Norway.
I see your clever camera tricks at the start! Good video, you successfully border the edge of whacky. Each episode is crafted better than the thing your making 😂😂
Tap & Spoon sounds like a hip restaurant
You are great at that lathe sculpting free hand. Keep it up I love this stuff
All cheap Tap holders suck Uri, well done on inventing a good one. I am amazed how well your lathe and tooling cuts mild steel, not many people would like to hold the tool while turning steel........or they are just plain mad, that probably helps!!
חולה עליך אורי
העבודות שלך והאנרגיות זה משהו אחר
עומר
Nice! Agreed, brass tends to look iffy until you get it up to a high polish. Always a pleasure to see one of your uploads!
Be very careful with types of free machining steel if these are going to be used in any kind of eating or drinking implements because some types are leaded. The inclusion of lead creates small nodules throughout the steel and provides an easier break for chips, which is why they're good for machining. A couple of other alloys (e.g. those with added sulfur or manganese) have a similar effect without the problems of lead.
SAE grades that include an L (12L13 or 12L14 are pretty common) are leaded. Couldn't find specs for automatenstahl like 9SMnPb28 on Matweb but those seem to just list out particular alloying elements and point percentages, so that example would be leaded at .28%.
Nah, it’s fine….
Lead makes everything taste sweeter-just ask the ancient Roman Empire!!
😆😈
Tracy Tools in the UK have every format of tap, die and drill for metal you'll ever need.
Fun machining at the lathe! Both results were excellent. 👍 😃
Beautiful craftsmanship, try a bit of oil on anything you put in the tail stock chuck on the lathe, drills, taps etc, esp when working steel
Excelente tutorial Uri , mucha imaginación hay que tener , para sacar de dos tornillos , esas dos preciosas obras de arte , trabajas las piezas en el torno como los de madera , jajaja , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓
Always a pleasure to watch you Uri.
I have one of those cheap tap/die sets. I love cheap tools but avoid using it because the taps are so low quality. I would strongly recommend getting a few taps of HSS from a really good manufacturer, they are far stronger, sharper and cut with less force and will last 20 times longer. If you have never used a really good quality tap then treat yourself, spend $10 on a single M3 tap from someone like Dormer and be amazed by how much better they are. Great video, lovely organic shapes hand turning metal, well done.
You da man Uri! Keep doing what your doing!
Wow Amazing ❤️❤️❤️👍
on the spoonhandle, you really achieved clickspring style !
Uri, you are absolutely crazy, and absolutely beautiful, love your non standard methods and really amazing videos. You are awesome.
It's clearly visible in your work that you have been watching some machining videos lately :-)
It's all benefit. It opens a lot of possibilities.
Genial como siempre, un gran abrazo Argentino!!!!
Love you more with every new project!
Uir! my heart can't take the stress when you zoom in while tapping, I keep thinking the tap is going to break hahahahaha
amazing as always keep up the amazing work/love
Love it, great job. Use the spoon to stir your coffee
Love you Uri! 😍
13:18 this is why i love your videos so much! just the unabashed madness is refreshing:D
Very little liquid - but it is pretty :-) nice job on the tiny tap handle. I have the most baby Starrett for things like that (and the bigger ones) and I use all of them on the regular for various sized jobs.
I love you, Uri. Keep it up man!