I always use my impact gun however I literally just sheared off one of my spindles putting the blades back on so from now on I’m just gonna use a ratchet to install but will continue to use the impact to remove them. Thanks for sharing your videos.
You can tell by the good clean bolts that he just put them on. I would like to see someone take off some really hard to remove bolts and do it for real and not to make a movie.
Just tried to get my blades off. 24" pipe wrench won't break the bolts loose. Impact driver won't budge them either. Only 25 hours on this Ariana 60. I'm very frustrated
I'm sorry new to taking off mower blades I want to put anti seize on them so they are not so hard next but your saying it will mess with the torque should I torque them less or more or no anti seize.
I always use my impact gun however I literally just sheared off one of my spindles putting the blades back on so from now on I’m just gonna use a ratchet to install but will continue to use the impact to remove them. Thanks for sharing your videos.
"Tap it 2 or 3 times". Reminds me of college. Anyways, like I was saying, great video! Made me realize how easy this can be.
Thanks for the vid. What’s with the add on you attached on the right side of the mower where the excess grass spits out?
I changed my blade on my kubota zero ,after market blade but now it making a small noise from the deck like something loose the blade or very tight
Thank you.. great advice and video ❤
You have actual light under the deck! Do you know how many nimrods video this blade change in the dark?! It's a lot. Thank u!
Really dump question I have a corded impact that's rated at 450 ft lbs do you think that will be enough to remove the bolts?
What about a torque wrench?
How do I lock my blades down I've tried every gadget possible. 😥
You can tell by the good clean bolts that he just put them on. I would like to see someone take off some really hard to remove bolts and do it for real and not to make a movie.
Exactly
That Milwaukee is a beast. It will spin 'em off, no matter what.
U made it look easy!!!! I had to find a wrench to hold the pulley so I may loosen the bolts to remove my blades!!!! Ughhhhhh!!!!!!
Does anybody tell you the damn socket size in these videos??
15/16 socket
He clearly says 15/16.
th-cam.com/video/tf2jJu09CJk/w-d-xo.html
Is once not enough for you?
What is the size?
Watch the dang video and LISTEN!
Cripes!
Just tried to get my blades off. 24" pipe wrench won't break the bolts loose. Impact driver won't budge them either. Only 25 hours on this Ariana 60. I'm very frustrated
have you tried heating the bolt?
@@cretene1 I was able to loosen them all, using a length of unistrut as a breaking bar.
Thanks
Spray bolt with Pb blaster first and let it sit for 5 minutes then try and take off
Place a closed end wrench on the bolt and hammer it to loosen. Works similar to impact wrench.
An impact driver works. No need for an impact wrench. Some of the other youtube videos show this.
Only torque them on with 90-100 ft lbs. If you use anti seize, you over torque.
I'm sorry new to taking off mower blades I want to put anti seize on them so they are not so hard next but your saying it will mess with the torque should I torque them less or more or no anti seize.
Great easy video thanks
Milwaukee is good! But, Ingersol Rand is better! Always get the best!!!
spindles look small
you talk way too much