this is not the exact method to have one half or one bar as i didlong ago the same as you and got nothing, but u must open the case and check where is the 4G antenna (there are at least 3 or 4 antennas inside : gsm gps wifi and nfc ) once you find it try around the source of antenna and when you got better signal so fix it there ( not on the case but next to motherboard as the sticker have not to be far from source antenna) if you are a skilled man you can try to reach the conductive part on the stiker as its covered and solder it to gsm antenna and you will no doubt get 1 or 2 bars more but thats difficult to operate on the sticker so just do the first thing as i did and you dont have to reboot phone you just have to wait 10s until the signal update, those who told you to reboot are idiots as you have to try fo hours to find the best orientation, i found mine after many tries in 10 minutes without any reboot as i did millimeters tests
As far as I know, antenna needs electrical current to work properly. I think that should be placed inside phone and positioned close to the antenna in the motherboard not outside the back cover. If that's made by copper especially since it's very thin, copper it should easily resonate with the slightest grounding or electrical current in the phone. Tower BTS needs battery's and voltages to extending the signal frequency as far as possible. Correct me if i'm wrong.
I remember having something similar in the early 2000s. Had a razor flip phone. You would open the battery case and it went inside. It did boost the signal greatly. Back then I lived in a very rural area, hardly any signal until I tried one. Never had a drop call after that. Very curious to see how well these work on newer phones.
@OMNITECH just to know have you correctly identified the signal antenna is in your phone and placed there??? not as seller I'm asking just to know even it's not working like that :D
usually the best are 4g/5g booster antennas but those are placed at home and not on the phone, there are some that are placed on the phone itself but i never tried them so i can't really suggest since i don't know if they really work
Dude! Keep doing these vids! Keep exposing scam products.
Actually the older phones benefited from something like that when you could take the back off and you could actually see the antenna terminals
this is not the exact method to have one half or one bar as i didlong ago the same as you and got nothing, but u must open the case and check where is the 4G antenna (there are at least 3 or 4 antennas inside : gsm gps wifi and nfc ) once you find it try around the source of antenna and when you got better signal so fix it there ( not on the case but next to motherboard as the sticker have not to be far from source antenna) if you are a skilled man you can try to reach the conductive part on the stiker as its covered and solder it to gsm antenna and you will no doubt get 1 or 2 bars more but thats difficult to operate on the sticker so just do the first thing as i did and you dont have to reboot phone you just have to wait 10s until the signal update, those who told you to reboot are idiots as you have to try fo hours to find the best orientation, i found mine after many tries in 10 minutes without any reboot as i did millimeters tests
As far as I know, antenna needs electrical current to work properly.
I think that should be placed inside phone and positioned close to the antenna in the motherboard not outside the back cover.
If that's made by copper especially since it's very thin, copper it should easily resonate with the slightest grounding or electrical current in the phone.
Tower BTS needs battery's and voltages to extending the signal frequency as far as possible.
Correct me if i'm wrong.
I remember having something similar in the early 2000s. Had a razor flip phone. You would open the battery case and it went inside. It did boost the signal greatly. Back then I lived in a very rural area, hardly any signal until I tried one. Never had a drop call after that. Very curious to see how well these work on newer phones.
Yea it has to go inside outside won't work
@OMNITECH just to know have you correctly identified the signal antenna is in your phone and placed there??? not as seller I'm asking just to know even it's not working like that :D
Temu or Ali express, all Chinese are just scammers lol 😂😂
Like gringos. Wish is the worst scam site ever.
Don't listen to anyone, just throw out that fooling stupid sticker.
Its Really Tempting to Buy Man Its Like I have To buy it my Self Even tho Its Literally Just a STIKKER butt....
You have to looking for the anttena where is located and the back and put it there
Обычно снизу
Thank you for useful information ❤❤❤❤❤
Hello sir I have Samsung galaxy J1 mini 105. What can I do to any app app go to SD card please can you give me information thank very much
Follow instructions and put inside the phone and don't put your fingers all over the sticker. Then review it.
Signal strength in your settings would be the actual tell tell sign if he knew anything about phones 😅
other signal for cell phone ?
Recomand pls😅😅
usually the best are 4g/5g booster antennas but those are placed at home and not on the phone, there are some that are placed on the phone itself but i never tried them so i can't really suggest since i don't know if they really work