It worked somehow 🎉I have an exam tomorrow and I am in vacation couple hundred km away from school . all the car fix around me is out of reservation thanks a lot
Sir, you have some great info on your site. But my onl issue is your music, makes it hard to understand you. Everyone I'm sure wants to hear YOU NOT YOUR MUSIC!!! Please don't stop Great Info!, I subscribed
Great video man. I have 2009 3.8 v6 and super select just blinks at the center if i select anything other than 2wd. I'm going to start checking the upper solenoid 😅
@sanober1518 mine blinks permanently, however while the engine is running if I put in any 4wd mode, the light keeps blinking, if I switch engine off and put the canlr in 4llc or 4hlc and I start again, it works fine, if I change to 4h or 2h the diff light starts blinking again.
@@horeamarinescu1016 yes the same happen with me ..if m over speed it blinks yellow one and once I turn off the car and restart it's fine ..do u show it to anybody..is it normal or big issue..plz let me know
You are correct about the obd2 My mk908 doesn't show anything for the 4wd I'm assuming that it's because it isn't a module controlled system...per say.
Hi mate! Thanks for the clear video! So in a default position (engine on, 2H), the actuator should be pushing into the diff to disengage the front axle?
Hi Frank, Great educational video. Where did you post the CODES please? I am having issues but need to know the codes you spoke of. Thank you in advance
@@DJGRAH hi. Thanks for your feedback. Please find it on the 5th page (section 23A-406). Best jdmfsm.info/Auto/Japan/Mitsubishi/Pajero-Montero/Manuals/2006%20Montero/GR00003400C-23A.pdf
Hi Frank, i am also from Maputo and i’m about to get a 2001 Pajero DID 3.2 but got alot to learn. Do you have any social media Where we can chat, please?
Thank you Frank. does your Mitsubishi Pajero have a 4m41 engine? I have seen forums complaining about grounding cars of after 2000. I have a gen 3 Pajero with a 3.2L DiD 4M41 Engine.
@@frankcumaio8328 thank you for this response. Mine is a 2003 gen 3 pajero. It has in it a 4m41 engine, 220k on the odometer. the fuel injection pump is a Zexel vrz pump. It cranks for 5 seconds before starting. When engine is till below running temperatures the RPMs are 750. Once it warms up, when i engage it to load, the rpms drop to between 650 and 700. And then after a short will it will stall. Starting it warm or cold takes it 5 or more seconds to start
@@frankcumaio8328 4x4 system is working fine when vehicle is in the on posición but engine not starting, then start the engine and from 4H to 4Llc works fine, then put back in 2H and center lock light start blinking. Code is 34
Hello, If you have ABS lights on all the time, please look at your ABS sensors. Most likely one of them at least is dead and sending the signal to the ECU. Once fixed all will be fine. But before you do this make sure that your break fluids are at optimal levels and your break pads are all good. Low levels of the the break fluid could trigger error codes too
I recently disconnected the battery on my Pajero to install a new radio. When I reconnected the battery I've had all sorts of problems that weren't present before. The automatic transmission gear changes are not smooth like they used to be. The 2nd to 3rd gear change revs up before engaging, this is not present when using the manual change mode and only seems to happen at light throttle.i had the transmission serviced but no change. Also, when I turn the Aircon on, the car lurches forward like I've tapped the accelerator, it does this while driving too. The Aircon still blows cold but not that cold so I've booked in to regas it. The alternator was changed just after the symptoms started, could it be a tight belt and regarding the transmission, could it require a reset? I've had the car scanned for codes but nothing is showing up
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
It worked somehow 🎉I have an exam tomorrow and I am in vacation couple hundred km away from school . all the car fix around me is out of reservation thanks a lot
Great video brother, I envy your scrapyard of Pajeros damm.
Best way to prevent this issue of sticky/faulty vacuum solenoids is simply to exercise all the 4x4 controls regularly
Weldone Frank
Perfect fault finding process
Appreciate it bro🙏🏻
Sir, you have some great info on your site. But my onl issue is your music, makes it hard to understand you. Everyone I'm sure wants to hear YOU NOT YOUR MUSIC!!! Please don't stop Great Info!, I subscribed
Great video man.
I have 2009 3.8 v6 and super select just blinks at the center if i select anything other than 2wd.
I'm going to start checking the upper solenoid 😅
Did you find it?
I have the same problem, but my solenoids both click and have good resistance.
@@horeamarinescu1016having issue yellow light blinking after speed up
@sanober1518 mine blinks permanently, however while the engine is running if I put in any 4wd mode, the light keeps blinking, if I switch engine off and put the canlr in 4llc or 4hlc and I start again, it works fine, if I change to 4h or 2h the diff light starts blinking again.
@@horeamarinescu1016 yes the same happen with me ..if m over speed it blinks yellow one and once I turn off the car and restart it's fine ..do u show it to anybody..is it normal or big issue..plz let me know
Mine just blinks.
You are correct about the obd2 My mk908 doesn't show anything for the 4wd I'm assuming that it's because it isn't a module controlled system...per say.
Yes exactly, but you can still check for errors. That procedure found in service manual. Thanks
@@frankcumaio8328 yes ground pin one on the dlc. I work by the service manual as well. Enjoying your videos
Hi mate! Thanks for the clear video! So in a default position (engine on, 2H), the actuator should be pushing into the diff to disengage the front axle?
My 2001 montero (pajero) limited does not go into any of the 4wd selections maybe this can be my same issue. I hope so.
I was wondering is this salvage yard still around for Mitsubishi Montero
yes in Mozambique
How did you tool off the pin. I cant do it. I dont know how
Gracias, excelente video
Awesome Bro.
Anyone know where I can get a Pajero Shop Manuel in English?
Where are you located?
Hi Frank, Great educational video. Where did you post the CODES please? I am having issues but need to know the codes you spoke of. Thank you in advance
@@DJGRAH hi. Thanks for your feedback. Please find it on the 5th page (section 23A-406). Best
jdmfsm.info/Auto/Japan/Mitsubishi/Pajero-Montero/Manuals/2006%20Montero/GR00003400C-23A.pdf
@@frankcumaio8328 You are AWESOME...Many thanks
Hola muy buen tutorial, me puedes conseguir el sensor de temperatura
My pajero's gear bulb "D" not working. I just want to know bulb code. How can I search on net?
Is it dangerous to drive a car with flashing lock light. Its mitsubishi pajero pinin 2.0 gdi?
Hi Frank, i am also from Maputo and i’m about to get a 2001 Pajero DID 3.2 but got alot to learn. Do you have any social media Where we can chat, please?
@@YMFN-2JH sure bro. Hit me up 842562111 whatsapp
Thank you Frank. does your Mitsubishi Pajero have a 4m41 engine? I have seen forums complaining about grounding cars of after 2000. I have a gen 3 Pajero with a 3.2L DiD 4M41 Engine.
Welcome Francis. Mine has 6G75 engine, the early 4m41 non common rail were the ones prone to failure. The fuel pump fails
But the one on the video has 6G72, the one that i own now is the one with 6G75
@@frankcumaio8328 thank you for this response. Mine is a 2003 gen 3 pajero. It has in it a 4m41 engine, 220k on the odometer. the fuel injection pump is a Zexel vrz pump. It cranks for 5 seconds before starting. When engine is till below running temperatures the RPMs are 750. Once it warms up, when i engage it to load, the rpms drop to between 650 and 700. And then after a short will it will stall. Starting it warm or cold takes it 5 or more seconds to start
Really informative video. Where are you from? You guys have a junk yard pajero heaven lol also your pajero looks really good
Appreciate it bro. I’m from Mozambique, hahaha yes we do
@@frankcumaio8328 awesome bro but where is that country?
@@brandongoberdhan6335 its located in Southern Africa,My city borders with south africa
I got the same code but both selenoids are working, vaccum actuator works fine, no idea what could be
Hi Mauro. Check the solenoids in the transfer case could be those. Also check for the codes do you have them?
@@frankcumaio8328 4x4 system is working fine when vehicle is in the on posición but engine not starting, then start the engine and from 4H to 4Llc works fine, then put back in 2H and center lock light start blinking. Code is 34
What did you find to be the problem? I have the same problem, both solenoids are fine and I get error code 33
Great work
Tq bro your tuturiol very useful
Thanks
So are there two vacuum solenoids, one under the air filter and the one with the actuator?
You have two solenoids under the air filter and one actuator at the bottom near the front diff that engages it
@@frankcumaio8328 i thoutht the one by the actuator was a switch to tell the computer if the front diff is engaged or not
@@orlanmedina3693 I taught he was mentioning as a vaccum solenoid. But yes we have one switch for the position near the actuator. It has two wires
Hey man nice video. I did the procedure and my center diff light is constantly blinking. Also my abs light too. What does this mean?
Hello, If you have ABS lights on all the time, please look at your ABS sensors. Most likely one of them at least is dead and sending the signal to the ECU. Once fixed all will be fine. But before you do this make sure that your break fluids are at optimal levels and your break pads are all good. Low levels of the the break fluid could trigger error codes too
Awesome job! Great video!
Is this scrap yard in Maputo? I need to get a solenoid/actuator for my 1989 Pajero. Please give the address. Thanks.
Yes in Zimpeto, 1a rotunda da cicular. +258 84 031 0883 Magaia
@@frankcumaio8328 Thanks. May you send the google maps location? I usually stay in Maputo city and don’t know much about Zimpeto.
@@aronnr Dropped pin
maps.app.goo.gl/6URdTJDbA774Lr619?g_st=ic
What is the symptom?my car same problem the middle light blinking.the car wont move..
where is the a/t switch on this mode?
Legend 🎉
Hi Frank. Great videos. I have a problem with my Pajero. Can you help please?
@@brandonc6980 yes sure. How can i help
I recently disconnected the battery on my Pajero to install a new radio. When I reconnected the battery I've had all sorts of problems that weren't present before. The automatic transmission gear changes are not smooth like they used to be. The 2nd to 3rd gear change revs up before engaging, this is not present when using the manual change mode and only seems to happen at light throttle.i had the transmission serviced but no change. Also, when I turn the Aircon on, the car lurches forward like I've tapped the accelerator, it does this while driving too. The Aircon still blows cold but not that cold so I've booked in to regas it. The alternator was changed just after the symptoms started, could it be a tight belt and regarding the transmission, could it require a reset? I've had the car scanned for codes but nothing is showing up
Great work 👏
eu tbm sou muito fa pajero,estou a pensar compra um,abracos
I need some help with my pajero, idk if you’ll see this comment but how can I reach out to you to help diagnose this issue
You can reach me out via WhatsApp +258842562111
i did the same but the ligth still on
any idea??before i go for swiches?
Can you check if you dont have any wiring around the gearbox switches cut? Which code you got
@@frankcumaio8328 transfer line sw2
I have a blinking front wheels when engaged in 2H. Do you know why?
diagnose it brother. the codes will help to understand whats messing up
@@frankcumaio8328Code 35 what does it mean?
Great video! 💪🏽💪🏽💪🏽💪🏽
Where is the solenoid located in the engine
On the right side of the air filter informer of your headlights (right side)
A lot of pajeros in the scrapYard, where are you from, Here they are rareeeee
Hahahahah we have a lot because of the failure on the High pressure fuel pump. Im from Mozambique
@@frankcumaio8328 Mine to, so i change the engine with 2.8 head and mechanic fuel pump, and working as charm
Hi Frank I liked your video and I have problems with my 2006 Pajero full diesel can you please help me
@@maxabedian4461 HI Max, thank you so much. Yes sure can help you out. Which problems are you having?
check fuses under the dash i found a blown 10 amp blown replaced it and all good
Which fuse was it?
Mine has had no illuminated lights whether 4WD is engaged or not. How to fix it ?
Check the dash bulbs. They might be burnt
@@frankcumaio8328 I checked. Fuse was burnt..
👍👍👍👍👍👍
Hey that's great, how do i reach you Frank?
hi. Email me at frankcumaio@gmail.com will give you other details
cool
I am not able to select the 2H of my 2002 Mistubishi Montero.
All the others work but it cant get to the 2H
Please ut
Hi, could you shate the list of errors?
@@maciek5807 updated the file in the description. Sorry for the delay
Sorry , How can I can contact you?
Hi bro. Whatsapp its fine +258842562111
You are good. Check out if Will Smith is your brother.😅😅
😂😂😂😂😂 hahahhahahha man