How to use Super Select 4WD (Mitsubishi Pajero , Shogun models)

แชร์
ฝัง

ความคิดเห็น • 104

  • @tripoutoftheblue256
    @tripoutoftheblue256 3 ปีที่แล้ว +4

    Thank you very much your video was so useful to me🙏👌💪

  • @francispituvaka7086
    @francispituvaka7086 ปีที่แล้ว +3

    Thanks.. very helpful tip

  • @KittenNippl3s
    @KittenNippl3s ปีที่แล้ว +1

    ty, this was very helpful

  • @yousafzaiaa7453
    @yousafzaiaa7453 3 ปีที่แล้ว +9

    Rear Differential Lock option is available only in selected models. In the models with this option, switch is located in the front console adjacent to the cigarette lighter socket (in front of the super select drive mode lever). This switch is labeled as "R/D Lock"

    • @magnumllama400
      @magnumllama400 3 ปีที่แล้ว

      Which models exactly?

    • @yousafzaiaa7453
      @yousafzaiaa7453 3 ปีที่แล้ว

      @@magnumllama400 I have seen R/D lock in Exceed Gen-II, GDI Gen-III. Also heard that NW VRX have too. But each model was marketed with different options for different countries to which that was sold... do not have precise info which exact region models have this option. These details are available in sales catalog (unfortunately I don't have one)

    • @magnumllama400
      @magnumllama400 3 ปีที่แล้ว

      @@yousafzaiaa7453 dont we know anything about which 3 door gen 2 models had that?

    • @yousafzaiaa7453
      @yousafzaiaa7453 3 ปีที่แล้ว +1

      @@magnumllama400 I will check with a friend who runs Pajero modification workshop. He might have an idea. I will share if something useful is found. At the moment, I know Exceed used to have this; but not all Exceeds. If you wanna search, first ensure this is Exceed; then further check if it does have R/D Lock.

    • @magnumllama400
      @magnumllama400 2 ปีที่แล้ว

      @@yousafzaiaa7453 any information?

  • @NickRock4423
    @NickRock4423 3 ปีที่แล้ว +2

    can you please do a video about how this automatic transmission work. my vehicle dont shift gears properly. there is a kickdown cable and a obd connecter can you please do a video explaining how to diagnose these problems on this 4m40 auto gearbox

  • @brkauto7897
    @brkauto7897 ปีที่แล้ว +2

    The first two gears you can move while driving. The low box witch you didn't show you have to be stopped. 2 to 4wd straight forward to 4wd .Next one is right and forward center difflock. Next one push lever down and forward low box with all locks on. Most rear diffs are limited slip deffs but some have difflock. Button will be in center control forward of gearstick

  • @IrishBadger
    @IrishBadger 11 หลายเดือนก่อน

    How's things mate I'm saveing for a 3 door automatic pajero have always been in love with them 🙂 have you still got yours ?

  • @conquerandwin
    @conquerandwin 3 ปีที่แล้ว

    Hi, what does it mean when the center is flashing but the four green lights are off?

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว +1

      Hi it could just be loose wiring mine does it sometimes!

  • @jakubhlavinek5985
    @jakubhlavinek5985 11 หลายเดือนก่อน

    Hello! Great video, thank you!
    Have the Pajero classic with super select. The 2h to 4h works when stationary but on the move it makes a grinding noise when i try to engane, so i always come back to 2h. Any idea what that could be? Can´t find the answer anywhere.

    • @CONNER3497
      @CONNER3497  11 หลายเดือนก่อน

      I'd go to a mechanic sounds abit beyond basic knowledge mate

  • @HealthSupercharger
    @HealthSupercharger 2 ปีที่แล้ว

    Can you drive in 4 low gears if you are on concrete steep road??? There is a steep concrete road in front of my rental place and I heard that in 4 low you might not want to be driving if not on dirt road?????

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว

      No dude , just put the car in 4H and it should pull no problem up the hill! Anything else will damage the transfer box

  • @johnnybigood4708
    @johnnybigood4708 3 ปีที่แล้ว +1

    Hello im in the process of buying an l200 2005, is the 4wheel set up the same as this, thank you in advance 👍

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว

      Hi I believe they have "Easy Select" which means you cannot use the 4H On the main road unless covered in snow , extreme flooding or if your offroad. The easy select has 2H , 4H and 4HL

  • @jamessandalls242
    @jamessandalls242 ปีที่แล้ว +1

    When I'm in 2 wheel drive only 1 green light shows on the dash rear right isn't working? Would you know the issue?

    • @CONNER3497
      @CONNER3497  ปีที่แล้ว

      Probably the bulbs pal if you can tell its in 4x4 get the bulbs changed or the sensors on the transfer box

  • @beresfordmacarthy7099
    @beresfordmacarthy7099 2 ปีที่แล้ว

    Hello here. Just discovered that after driving for a short distance the Auxiliary indicator comes on and the vehicle automatically becomes lazy. How to handle this

    • @JosephKongsingchiong
      @JosephKongsingchiong 2 ปีที่แล้ว

      I am driving but the main problem .Why you drive ..thank you

  • @miteshyelke4454
    @miteshyelke4454 3 ปีที่แล้ว +2

    I recently bought pajero io GH H76W 99 model automatic.. whenever I move from parking to drive mode vehicles gives a jerk.. what causing this issue..

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว +1

      Could just be the gearbox moving into gear. Ask a local mechanic

  • @hugodaniel701
    @hugodaniel701 ปีที่แล้ว +1

    Nice video, I had to put my ‘94 Delica l400 in 4 low yesterday to get out of some sand on a crazy long rural driveway.. I was stuck in RWD.. soon as I put it in 4 I got out out so quick lol.. question, so I could leave it in 4 hi and drive on paved roads, I just have to stay under 60 mph?

    • @CONNER3497
      @CONNER3497  ปีที่แล้ว +1

      Yes absolutely 4H is fine on paved roads. If there's no need then always go for 2H just for fuel economy but if you want to move abit quicker or on hills , rain etc including DRY roads 4WH is perfect and stay under 60 you manual will confirm this. Happy 4 wheeling!

  • @oxdudepoege
    @oxdudepoege 3 ปีที่แล้ว +3

    Great video but I have an additional question.
    What is the a/t mode button besides the shifter good for?

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว +2

      Please see the below taken from the owners club
      This switch, adjacent to the automatic shift lever, allows the driver to choose the gear range as appropriate.
      There are three positions, POWER, AUTO and HOLD.
      POWER: when switched on, the POWER light will show on the dash. In normal driving, with the shift lever in D, the power mode will operate through the full range of gears 1 to 3 plus overdrive when active. In 2, the power mode will only operate through 1 to 2, and in L, the power mode will only operate on the first gear.
      AUTO: In auto mode, the transmission will automatically change between POWER and ECONOMY modes as driving conditions define, changing to POWER mode for example when starting a hill ascent.
      HOLD: The HOLD light will show on the dash. The transmission will operate in ECONOMY mode through the full range of selected gears, not changing any higher than the selected gear, for example if you have selected L, the transmission will not change up to 2

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว

      @@thesilentgarender.6890 an extra gear. So yes essentially please see above

    • @nickwinters3657
      @nickwinters3657 2 ปีที่แล้ว

      @@CONNER3497when i put it in normal drive i only get 1 green light yours is working fine what do you think is wrong mine

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว

      @@nickwinters3657 I'd say bulb!

    • @nickwinters3657
      @nickwinters3657 2 ปีที่แล้ว

      @@CONNER3497 yeah i thought that but the top green lights keep flashing with 1 solid green light at the bottom were it should have 2 and them top 1s should go off when driving and its seems slower?

  • @user-zw8si8tp9y
    @user-zw8si8tp9y ปีที่แล้ว

    Hello ,got de sem car bt stuck in lock ,hw can l shift to 2wl

    • @CONNER3497
      @CONNER3497  ปีที่แล้ว

      I don't know I'm not a mechanic. Try moving car forward and back it may be a bulb that's out not sure

  • @Sava13Sorin
    @Sava13Sorin ปีที่แล้ว +2

    💥💪one of the best transfer box ( oldschool ) ever made super select ...the others ( just dream about it ) it s vascoclutch sistem thats why you can change during your drive i had it on my gen 3 pajero too

  • @tougeproject8317
    @tougeproject8317 2 ปีที่แล้ว

    great video! question, so you can't shift to 4HLc & 4LLc while moving or driving? it has to be on stop? either from 4H to 4HLc or any of the 4 options?

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว +2

      From my knowledge its only 2WD into 4WH whilst driving up to 60 MPH everything else you must stop

    • @tougeproject8317
      @tougeproject8317 2 ปีที่แล้ว +1

      @@CONNER3497 got the info already. it's only when you select low range like 4LLc that you need to stop. but from 2w to 4HLc is fine.
      Thanks for responding right away! drive safe!

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว +1

      @@tougeproject8317 thank you for liking!

    • @HealthSupercharger
      @HealthSupercharger 2 ปีที่แล้ว +1

      @@CONNER3497 yes I agree. And even then it is less wear and tear if you stop and do it. Better for the machine

  • @MrIpena
    @MrIpena 3 หลายเดือนก่อน

    I have a 1996 Montero and it happens that the 4H lights keep flashing all the time, while the 2 weel Drive indicator light are off

  • @panyalvius1
    @panyalvius1 3 ปีที่แล้ว +1

    Thanks for the gr8 video i was a fan of this jeep and i just purchased one.. its very useful video i spent ages withthe four wheel gear... thanks.. quick question.. my gear lever is on most rear position feom where u started.. but the two above wheels in dash keeps flashing forever can it be wiring ?

    • @yousafzaiaa7453
      @yousafzaiaa7453 3 ปีที่แล้ว +2

      Don't worry about this. Majority of vehicles of this model do the same... front wheels blinking come and go by itself. Being in use for years, pressure sensors in the gearbox (responsible for controlling 4x4 indicator) are not "so sensitive" anymore and sometimes do not switch their position according the selected drive mode. This does not affect the drive however might be a bit tricky to determine in which drive mode vehicle actually is. But if you are driving this vehicle for significant period, this is not just 4x4 indicator which tells you which drive mode is selected. You can determine this by the behavior and drive of your vehicle ... btw mine is Pajero Exceed 2.8 1996 and its 4x4 indicator does the same, so don't worry... you are not alone :)

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว

      @@yousafzaiaa7453 As above they normally flash for a while before going off. Sorry for the slow reply happy motoring

  • @3.5b
    @3.5b 2 ปีที่แล้ว

    Why do some pajeros have buttons to control the heater but others have twisting knobs?

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว +1

      Just depends on year , model ie shogun or pajero and if its been imported from and if so where. Hope this helps!

  • @helderdiogodiogo9973
    @helderdiogodiogo9973 3 ปีที่แล้ว

    Great video! The button he activated and deactivated next to the steering wheel, what is it for?

    • @helderdiogodiogo9973
      @helderdiogodiogo9973 3 ปีที่แล้ว

      I see this button on my Mitsubish Challenger 2.8 td but I never used it

    • @yousafzaiaa7453
      @yousafzaiaa7453 3 ปีที่แล้ว

      This is "Rear Window Wiper and Washer Switch". Please note that Pajero/Montero/Shogun has different versions marketed in the different part of the world. Some options are available in a certain version but missing in another. If you have this control in your model, button has three positions with "OFF position in the middle. upside pressed = position1 which is to operate rear wiper. Downside pressed = position2 which is for intermittent wiper operation (note that rear wiper speed is not adjustable unlike front wiper which has adjustable speed in intermittent mode). Washer is operated once while pressing the button. Washer fluid bottle is located in the rear door (you can see a round lid almost in the middle of interior side of the door)

    • @ivanzambelic1937
      @ivanzambelic1937 2 ปีที่แล้ว

      On my 96 pajero it is for fog lights on bull bar

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว

      Apologies for the reply! They are often for the aftermarket fog lights as in Japan they were not fitted.

  • @paulappiahmends5710
    @paulappiahmends5710 2 ปีที่แล้ว

    Where can I get a console to buy my is manual drive super selected.

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว

      Hi I'm not sure what your asking?

  • @s4mechanicgarage988
    @s4mechanicgarage988 ปีที่แล้ว

    How to remove the blinking 4x4 indicator when I put it in 2h it's blinking what would be the problem of it

    • @CONNER3497
      @CONNER3497  ปีที่แล้ว

      Sometimes it does this its a common error it will be ok , as long as the light goes solid eventually when engaging 4x4. These are 30 year old trucks now

    • @s4mechanicgarage988
      @s4mechanicgarage988 ปีที่แล้ว +1

      @@CONNER3497 oh ok thankyou

  • @maiadean7053
    @maiadean7053 6 หลายเดือนก่อน

    Why does the differential light stay flashing in 4HLc and 4LLc?

    • @CONNER3497
      @CONNER3497  6 หลายเดือนก่อน

      It does eventually stay put after a short while normally about 1 minute

    • @maiadean7053
      @maiadean7053 6 หลายเดือนก่อน

      @@CONNER3497 Thank you.

  • @cajjesra269
    @cajjesra269 2 ปีที่แล้ว +1

    What if the green lights not working?

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว

      Then its either the bulbs (common issue) or the sensor relay you have one on the actual tranfer box underneath and one under the dashboard I think

  • @rahamath2007
    @rahamath2007 3 ปีที่แล้ว

    can you help me..my pajero 2006 glx model ..i can't start in "P" gear position ,i just move to "N" then only able to start.
    how to solve this issue

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว

      N is neutral try D for drive!

    • @rahamath2007
      @rahamath2007 3 ปีที่แล้ว

      Yes...

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว

      @@rahamath2007 are you saying your car doesn't start in P? Was the handbrake on when you tried to start it?

    • @rahamath2007
      @rahamath2007 3 ปีที่แล้ว +1

      Yes you are right..when It's P i can't start..i just move the gear in N (neutral) it's starting..

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว +1

      @@rahamath2007 no idea then pal I'd go to a mechanic if I were you

  • @KS-kb4zt
    @KS-kb4zt 2 ปีที่แล้ว

    On 4hlc, 4llc all wheels are running or two?

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว

      All 4 anything past 2L is all 4 wheels dont use anything other than 4L on normal roads 4L can be used on everything including dusty , snowy wet or dry roads. For really serious stuff use the low range gears ⚙

    • @KS-kb4zt
      @KS-kb4zt 2 ปีที่แล้ว

      @@CONNER3497 👍

    • @magnumllama400
      @magnumllama400 ปีที่แล้ว

      @@CONNER3497 normal roads only 2H

    • @CONNER3497
      @CONNER3497  ปีที่แล้ว +1

      @@magnumllama400 yes but you can use 4H thats the idea of super select.

  • @ckemi1232
    @ckemi1232 4 ปีที่แล้ว

    Can u help me i got stuckn in 4hlc and i cant go to 2wd anymore... it wont go back.. i have he same model sir

    • @CONNER3497
      @CONNER3497  4 ปีที่แล้ว

      You tried reversing after you put in back into 2wd.

    • @ckemi1232
      @ckemi1232 4 ปีที่แล้ว

      @@CONNER3497 i cant put lever.. its stuck can u help.me

    • @CONNER3497
      @CONNER3497  4 ปีที่แล้ว

      @@ckemi1232 put it in neutral?

    • @ckemi1232
      @ckemi1232 4 ปีที่แล้ว

      Again dont move bro

    • @CONNER3497
      @CONNER3497  4 ปีที่แล้ว

      @@ckemi1232 shit maybe its siezed get a mechanic?

  • @ameerqasimjoiya8928
    @ameerqasimjoiya8928 3 ปีที่แล้ว

    Please tell how to engage 4Llc.

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว

      Thats all explained in the video if you watch it. Press down on the gearstick and push in the direction it says 4L is. Sometimes its on the right or left depends on if automatic or Manuel.

    • @andrewrobinson2869
      @andrewrobinson2869 3 ปีที่แล้ว

      Hi i just bought a 02 i0. Am i wrong , as i move the level from 2 forward to constant 4. Then push down then forward right is that 4 high as that works but i can't seem to get 4 low on left or is it not like a nirmal pajero. Does the button on main gear stuck for 3rd gear need to be off for 4 low.

  • @willtaylor5901
    @willtaylor5901 3 ปีที่แล้ว

    mitsubishi Challenger 03 my gears feel stuck in low

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว +1

      And I presume your not in low range?

    • @willtaylor5901
      @willtaylor5901 3 ปีที่แล้ว

      yeah bro not in low range

    • @CONNER3497
      @CONNER3497  3 ปีที่แล้ว +1

      @@willtaylor5901 dude I'm not majorly mechanically minded. I'd say maybe its an issue with the tranfer box , make sure it still has oil and stuff failing that get it to a garage

  • @jayfowler750
    @jayfowler750 2 ปีที่แล้ว

    You put it into 4HLC but you never put it into 4LLC at the very top, I think people would want to use that gear too

    • @CONNER3497
      @CONNER3497  2 ปีที่แล้ว

      If you watch again I put the lever into 4HLC and then pushed up to the top into 4LLC

  • @andrewacedo4069
    @andrewacedo4069 หลายเดือนก่อน

    That wasn’t very clear at all, I’m sorry..