Hey uncle Harvey. Long time no see a have been busy on the farm winter is a hard time cows Calvin. Baby calves to feed. Milking along with all other tasks time to catch up on my favourite TH-cam saw builder you. The tinman. And buckin billy Ray saw runner/operater. Good to see use all. 👍
Love the content Harvey. That 372 was cutting like that log was butter. Looking thru my parts room I found a husky 371k cut off saw been up there for prob 10 years. Well I see good in everything and grabbed bec I immediately noticed the oil tank and the other similarities to a 371xp or 72xp so I gutted it down of all the concrete saw attachments and she's def a chainsaw converter to a concrete cutter. 150lbs of compression so that's getting all the parts to be resurrected into a wood saw. It'll be a 372xp when I'm done.
Really wish there were an American saw company around still , we’ve got some of the greatest saw builders , that know what works and what doesn’t , it’s a shame some of you couldn’t get together and design something that could be produced here
Love your videos, the shop builds I watch several times. Make sure I don't miss anything. My dream saw is a 090. For your channel, you interested in going all out, full on, hold nothing back, complete build? I used to be a tree arborist, play with my ported 460 every chance possible. Now a truck driver, still cutting trees as much as I can on the side - always dreamed of running a 090.
Damn straight! I'll take mid to high 30's with rain in January!!! My Buddy gave me 30-40 saws, the vast majority of them are 372s... and they are just like you mentioned. Lol
Hey iron horse can you do a build on a 50cc class saw to make them a bigger and better running saw??? I’ve been trying to get a bigger saw but the weight of like a jonsred 2159 saw!! I’m a shorter guy at 4’10” tall and my back is pretty messed up and the heavier saws are just killing me nowadays!!! I have a jonsered 2159cc saw and I absolutely love it but I definitely need a bigger saw to run a 24” bar to 28” bar!! We burn wood but it has definitely been hard the last couple years being able to cut the firewood because of my back!!! I absolutely love cutting wood and also getting the exercise while doing it just makes me feel so good!!! Any help would definitely be appreciated!!! I absolutely love watching what you can do with a saw also!!! Awesome video buddy and remember keep up all the hard work buddy!!!!
It’s kinda going around the end but if you aren’t really familiar with the echo 590’s at $499… they have a exhaust duration of like 114… so they aren’t super zippy but because of their massive duration they have incredible torque for a 60cc size saw…they are light and cheap and they pull the 28” bar without much issue! Might want to check around and see if you might find someone around you and arrange a 28” bar test drive… they do things that a 60cc size saw’s shouldn’t be able to do… they don’t have that blasting 14,000 top rpm race car response… but I’m not thinking that’s what you need… the cut speed is just fine and their massive amount of torque has guy’s playing around with the 32’s and 36’s where no 60cc saw dare tread… I’m not going there but they will spin the 28” bar no problem… and they are light weight and the $499 brand new price just crushes any competition from the two big guy’s… they don’t either have anything that can complete without $300 bucks more cash at least!!!! Might want to try one out!
the 372 made short work of the cuts. it has great torque, eating through the wood with plenty of bite in reserve. interesting to see the 95cc piston also has only 1 ring.
That sounds like a nice work saw..that big bore is gonna be a sweet build..had that chain jumping in that ash..cool covers ive only seen one..was broke though 👍👍
@@eriknelson6529 hi buddy..I have a bunch..mostly x torque though..I m putting an old xp together now..he gave me the bug day he started his..I m gonna do mild port work on an oem cylinder with single ring oem piston..I m not filing mine down...lol😁😁
Really enjoyed your comments on your drag motor. I'm 70 and have been an automotive machinist for 40 years. Totally agree with still being a teenager from the ears up. First crank I stroked was a Keith black 460. Stroked it .250 and it worked well. I have an odd motor combo and would appreciate your thoughts. It is a 267 small block. 3.5 " bore with a 400 s.b. crank with mains ground down. Looking for better mileage with good low end torq. Putting it in a pickup. Would appreciate your thoughts.
I was watching Rosa string works today and he was saying how he wore out a couple of 372's Might be worth a shout over to him to see if he still has them dont think he parts them out cause he said he bought a new one
I did a similar mod to my 372 top cover. I drilled a 1.5" hole and put frog skin over the hole... I swear I see the screen suck in as I snap the throttle... I'd be interested to do a smoke test... Thinking further, why couldn't we drill holes in between the carb compartment and the cylinder? Would hot cooling air blow into the carb, or would carb compartment air blow across the cylinder for minor extra cooling? Hmmm. Pressure differential!
Do you mind sharing the part number of the clutch cover? I'd like to have one for my 371xp. Thanks for another great video. I'm looking forward to the 95cc build.
What are the best bearings to run in a 046? started porting tranfers last night just wanted to git your numbers on exhaust running a 28" bar. Thank you
Hey Harvey 👋 that thing sounds good!!!. I've been wondering about ignition timing when porting a saw but there doesn't seem to be any information out there about it. Would be cool to hear your thoughts on the subject and how to know whether or not to do it.
I've heard wiesco make amazing pistons they are marketing as racing pistons how do they hold up in a work saw i know u use a ton of em so i figured anybody know u would sir.
Would you be interested in porting a 262xp Husqvarna with KS non decomp cylinder a NOS hda87 carb and a three piece clutch. I'd be willing to pay you or trade you a ton of ms460 magnum parts, cylinders, pistons, crankcases, carbs, coils, 1 crankcases newly pcoated 1 crankcase scuffed a little but flywheel is stuck on but has good crank, bearings and seals, plus many more.
great video IRONHORSE were you able to keep the weight on the 95cc also im guessing there is mashine work to the to the 86cc head to just wondering i liked to do my 372 a 86cc also i have a 259 with a bad topend real clean and i have a 272 cant figure out whats wrong with it has brand new top end got spark and gas not shure wire it wont fire now i also have a 046 and a m460 one needs case Barings other one need bottom crank baring wonder what can be done with 046 or m460 hmm maybe 064 i heard 064 was one of the best power to weight saws so ya im getting older looking for light weight more power lol
Harvey speaks .....I listen. Then I watch it again and listen closer.....
Same
Paul from Iowa, Thank you Iron Horse for sharing. In this fast paced world, it's relaxing to watch and learn from someone who knows saws
Awesome build as always!!! Cheers from the east Kootenays British Columbia!!
A true master of his craft! Great job my friend👍🏻🇺🇸
Nothing but madness 😂👍. Buckin will love it, that's right in his wheel house.
Hey uncle Harvey. Long time no see a have been busy on the farm winter is a hard time cows Calvin. Baby calves to feed. Milking along with all other tasks time to catch up on my favourite TH-cam saw builder you. The tinman. And buckin billy Ray saw runner/operater. Good to see use all. 👍
Talk about a Master Craftsman Harvey I know your still learning but I think we could call you Dr.Saw! You never cease to impress us!
Love the content Harvey. That 372 was cutting like that log was butter. Looking thru my parts room I found a husky 371k cut off saw been up there for prob 10 years. Well I see good in everything and grabbed bec I immediately noticed the oil tank and the other similarities to a 371xp or 72xp so I gutted it down of all the concrete saw attachments and she's def a chainsaw converter to a concrete cutter. 150lbs of compression so that's getting all the parts to be resurrected into a wood saw. It'll be a 372xp when I'm done.
I know saws are expensive in Australia, for a 70 cc saw from stihl,husky and echo are all about $2000 Australian.
Brother in law had a 272/357 big bore 11 years ago. Strong runner built by Ed Heard or Gilles Levesque can’t remember.
Hey Harvey, nice job buddy! Dyno Joe's builds are awesome, always fun to see what he can do.
Harkness is a bad mama jama in the saw building game!!! I always love those out of the box sleeper or big bore build’s!!! Joe’s an awesome builder!!!
Really wish there were an American saw company around still , we’ve got some of the greatest saw builders , that know what works and what doesn’t , it’s a shame some of you couldn’t get together and design something that could be produced here
Same with Canada, we should both be making our own saws. Then we could have Canada vs USA for some healthy competition to keep things advancing.
Just the reminder i needed to put more focus on the small things when working up a fresh build ❤ thank you for being you and sharing this Ironhorse !
Nice runner to !!!! Good afternoon everyone 😊 ☺ 🤗 😀
Thanks 👍. Keep them up! You're a true gem in my book. Seriously, thank you until you're better paid.
Professor I really enjoy class lessons!👍
Wolf Creek Saw Shop, say IRONHORSE sent you:) God Bless and Protect everyone in this united in love community:)
Love it!!! Ryan always seem to have the real Meteor topend kit for those harder to find and different models… he keeps a killer inventory!!!!
boy aint nuttin wrong with that little beast wow !!!! sounds awsome !!!
Love it and looking forward to seeing that yz80 chainsaw build !
Great running 372 Harvey. You are really a master at saw building.
Love your videos, the shop builds I watch several times. Make sure I don't miss anything.
My dream saw is a 090. For your channel, you interested in going all out, full on, hold nothing back, complete build?
I used to be a tree arborist, play with my ported 460 every chance possible.
Now a truck driver, still cutting trees as much as I can on the side - always dreamed of running a 090.
That's gona be a sharp looking saw joe does great work an is awesome to hang out with the vented saw sounds good an cuts good
Hey Charles. Yeah that Saw cranks!! I actually like them this way. Be good 👍
Hi! Craig here in Willet. Thank you Sir.!
Glad your back young fella. Going to cut some firewood tomorrow. 288xp & 262 which used to be a 257. Really like your info. Keep it up.
Have fun!
262 has to be one of the best saws Husqvarna ever produced.
Awesome saw Harvey as always
Damn straight! I'll take mid to high 30's with rain in January!!!
My Buddy gave me 30-40 saws, the vast majority of them are 372s... and they are just like you mentioned. Lol
Now that the way a chainsaw should cut good job ironhorse, buckin will put another edge on it for his liking.
When I come across a scratched/grooved seal surface, I clean it up, and fill it with jb weld. Then hit it with some 2000 grit
I got to see 95 cc. Cant wait.
Awesome 372xp work saw Harvey! I absolutely 💯 love them builds... I try and focus on that type of builds!
Hey iron horse can you do a build on a 50cc class saw to make them a bigger and better running saw??? I’ve been trying to get a bigger saw but the weight of like a jonsred 2159 saw!! I’m a shorter guy at 4’10” tall and my back is pretty messed up and the heavier saws are just killing me nowadays!!! I have a jonsered 2159cc saw and I absolutely love it but I definitely need a bigger saw to run a 24” bar to 28” bar!! We burn wood but it has definitely been hard the last couple years being able to cut the firewood because of my back!!! I absolutely love cutting wood and also getting the exercise while doing it just makes me feel so good!!! Any help would definitely be appreciated!!! I absolutely love watching what you can do with a saw also!!! Awesome video buddy and remember keep up all the hard work buddy!!!!
It’s kinda going around the end but if you aren’t really familiar with the echo 590’s at $499… they have a exhaust duration of like 114… so they aren’t super zippy but because of their massive duration they have incredible torque for a 60cc size saw…they are light and cheap and they pull the 28” bar without much issue! Might want to check around and see if you might find someone around you and arrange a 28” bar test drive… they do things that a 60cc size saw’s shouldn’t be able to do… they don’t have that blasting 14,000 top rpm race car response… but I’m not thinking that’s what you need… the cut speed is just fine and their massive amount of torque has guy’s playing around with the 32’s and 36’s where no 60cc saw dare tread… I’m not going there but they will spin the 28” bar no problem… and they are light weight and the $499 brand new price just crushes any competition from the two big guy’s… they don’t either have anything that can complete without $300 bucks more cash at least!!!! Might want to try one out!
That 372 sounded very happy
Another awesome build… Saw King Harvey!!! He’s a saw whisper…don’t ya know!!!! ❤️👍😁
Thing runs like a Bear! super job
the 372 made short work of the cuts. it has great torque, eating through the wood with plenty of bite in reserve. interesting to see the 95cc piston also has only 1 ring.
That sounds like a nice work saw..that big bore is gonna be a sweet build..had that chain jumping in that ash..cool covers ive only seen one..was broke though 👍👍
Hey Tim. He gave me one he built and I think it's the perfect balance. It stays nice without frequent adjustments. They rip . You would love it.
I have to get hooked up with you on WhatsApp. Talk to Harvey and get my info
@@eriknelson6529 hi buddy..I have a bunch..mostly x torque though..I m putting an old xp together now..he gave me the bug day he started his..I m gonna do mild port work on an oem cylinder with single ring oem piston..I m not filing mine down...lol😁😁
@@eriknelson6529 I can do that..havent talked to him lately..about ready for a gab session with him anyways
You definitely should 👍
Great job Harvey on that stock build...🏁
That small block Chevy sitting there any chance that ran with J Waters #11 car at woodhull speedway..😁
Actually Alvin that’s an ls6 big block!
@@theironhorse6600 Do you know JW 11 car and his logger crew chief..?
As a matter of fact I do! And in the past have built some very successful motors for woodhull! Some great people over there!
Im gettin' excited
Awsome saws ! My friend
Really enjoyed your comments on your drag motor. I'm 70 and have been an automotive machinist for 40 years. Totally agree with still being a teenager from the ears up. First crank I stroked was a Keith black 460. Stroked it .250 and it worked well.
I have an odd motor combo and would appreciate your thoughts. It is a 267 small block. 3.5 " bore with a 400 s.b. crank with mains ground down. Looking for better mileage with good low end torq. Putting it in a pickup. Would appreciate your thoughts.
Put a 283 crank in it! With a 450 carb it would be quick and crazy! And great mileage! I’ll calculate the cu inches!
That would be 230 inches
I was watching Rosa string works today and he was saying how he wore out a couple of 372's Might be worth a shout over to him to see if he still has them dont think he parts them out cause he said he bought a new one
I did a similar mod to my 372 top cover. I drilled a 1.5" hole and put frog skin over the hole... I swear I see the screen suck in as I snap the throttle... I'd be interested to do a smoke test...
Thinking further, why couldn't we drill holes in between the carb compartment and the cylinder? Would hot cooling air blow into the carb, or would carb compartment air blow across the cylinder for minor extra cooling?
Hmmm. Pressure differential!
Awesome chainsaw rebuild video. very informative.
what a beauty good build
Do you mind sharing the part number of the clutch cover? I'd like to have one for my 371xp. Thanks for another great video. I'm looking forward to the 95cc build.
My favorite clutch cover..
Mine too!
Hey Iron Horse I think you and Dyno Joe should do a saw build together for a raffle and give us a chance to win saw built by you guys
Very nice 👌
Awesome Harvey!
You should build a 70cc out of that Husqvarna 359 you just got
Sounds real good 👍
Who slipped the new Beaver some speed pills? That thing cuts!
Some nice things to know about
What are the best bearings to run in a 046? started porting tranfers last night just wanted to git your numbers on exhaust running a 28" bar. Thank you
I have point 027 on the squash
I have point .027 on the squitch
Thing has big power, mostly from less ring tension
Do you have a part number/source/link for those screens?
Great job bud
Hey Harvey 👋 that thing sounds good!!!. I've been wondering about ignition timing when porting a saw but there doesn't seem to be any information out there about it. Would be cool to hear your thoughts on the subject and how to know whether or not to do it.
she cuts nice well done
What about the Mufflermod on that stock Numbers Saw?
Awesome 👌
Hi everyone hope everyone is having a blessed day
She cuts eh! 👍👍👍😊
👍🆙Harvey
Thank you sir
Stupid question time, a 2165/365 crank is the same as a 372 crank, yes?
Not a stupid question! And yes!
hey big paw paw how ya been bud ? ben meaning to get in touch !
I've heard wiesco make amazing pistons they are marketing as racing pistons how do they hold up in a work saw i know u use a ton of em so i figured anybody know u would sir.
Would you be interested in porting a 262xp Husqvarna with KS non decomp cylinder a NOS hda87 carb and a three piece clutch. I'd be willing to pay you or trade you a ton of ms460 magnum parts, cylinders, pistons, crankcases, carbs, coils, 1 crankcases newly pcoated 1 crankcase scuffed a little but flywheel is stuck on but has good crank, bearings and seals, plus many more.
Iron horse , what state (area) are you in ?
Any recommendations for a big bore cylinder on a 55 rancher? Stock is 46mm
remember: stroke is 31mm. go with a popup piston, jet the carb, and open up the exhaust.
5k3 views in 1 day, nice job chainsaws Boss
500 bucks sounds much nicer than those brand new 372xp's from Sweden for 1100$
Is there anyway for you to tell if those vents actually helped anything. Or are there way too many variables?
You can tell you know what your doing when using a chain saw. Looks like an extension of you Harvey.
Love your channel.were are you in ny
Near canisteo
great video IRONHORSE were you able to keep the weight on the 95cc also im guessing there is mashine work to the to the 86cc head to just wondering i liked to do my 372 a 86cc also i have a 259 with a bad topend real clean and i have a 272 cant figure out whats wrong with it has brand new top end got spark and gas not shure wire it wont fire now i also have a 046 and a m460 one needs case Barings other one need bottom crank baring wonder what can be done with 046 or m460 hmm maybe 064 i heard 064 was one of the best power to weight saws so ya im getting older looking for light weight more power lol
The big big bore
👍
THIS SHOULD PULL A 32 NO PROB RIGHT
A new day
Runs better then that stihl 084
I'm over in Ohio... I will take 30 degrees and snow over all this cold god damn rain making everything a muddy mess.
Was hoping you would noodle one for the haters lol
Bagus
Thanks!
Sepertinya 372 sama dengan 365 ya. Yang beda cuma cylinder nya
Same saw!
Chisel head ironhorse. Hard to find good parts buddy . 😢
Comment from me